Buck Regulator Positive Output Step-Down DC-DC Controller IC 16-TSSOP-EP

Series Voltage Reference IC ±0.05% 8-PDIP

40 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 40 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 6 V, 3.0 μA at VIN = 40 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 3.8 V, and 5.0 V 15 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

3 V, Voltage Monitoring Microprocessor Supervisory Circuit Features: Guaranteed RESET valid with VCC = 1 V 190 μA quiescent current Precision supply voltage monitor 4.40 V (ADM706/ADM708) 200 ms reset pulse width Debounced TTL/CMOS manual reset input (MR) Independent watchdog timer (ADM705/ADM706) 1.60 sec timeout (ADM705/ADM706) Voltage monitor for power fail or low battery warning Superior upgrade for MAX705 to MAX708

Ultralow Noise, 200 mA, Linear Regulator Features: PSRR performance of 54 dB at 100 kHz Ultralow noise independent of VOUT 3 μV rms, 0.1 Hz to 10 Hz 9.5 μV rms, 0.1 Hz to 100 kHz 9 µV rms, 10Hz to 100KHz 17 µV rms, 10Hz to 1MHz Low dropout voltage: 150 mV at 200 mA load Maximum output current: 200 mA Input voltage range: 2.2 V to 5.5 V Low quiescent and shutdown current Initial accuracy: ±1% Accuracy over line, load, and temperature: −2.5%/+1.5% 5-lead TSOT package and 6-lead LFCSP package

Low Cost, Low Power, True RMS-to-DC Converter Features: Converts an ac voltage waveform to a dc voltage and then converts to the true rms, average rectified, or absolute value 200 mV rms full-scale input range (larger inputs with input attenuator) High input impedance: 1012 Ω  Low input bias current: 25 pA maximum High accuracy: ±0.3 mV ± 0.3% of reading RMS conversion with signal crest factors up to 5 Wide power supply range: +2.8 V, −3.2 V to ±16.5 V Low power: 200 μA maximum supply current Buffered voltage output No external trims needed for specified accuracy Related device: the AD737 features a power-down control with standby current of only 25 μA; the dc output voltage is negative and the output impedance is 8 kΩ

Linear Voltage Regulator IC Positive or Negative Adjustable 1 Output 3A TO-220-5 Flow 30

Dual 100mA, Low Dropout, Low Noise, Micropower Regulator with Independent Inputs Features: Low Noise: 20µVRMS (10Hz to 100kHz) Low Quiescent Current: 25µA/Channel Independent Inputs Wide Input Voltage Range: 1.8V to 20V Output Current: 100mA/Channel Very Low Shutdown Current: <0.1µA Low Dropout Voltage: 300mV at 100mA Adjustable Output from 1.22V to 20V Stable with 1µF Output Capacitor Stable with Aluminum, Tantalum or Ceramic Capacitors Reverse Battery Protected No Protection Diodes Needed Overcurrent and Overtemperature Protected Tracking/Sequencing Capability Thermally Enhanced 10-Lead MSOP and DFN Packages

3A, DC/DC Converter with Dual Rail-to-Rail Current Sense Features: Dual 100mV Rail-to-Rail Current Sense Amplifiers Wide Input Voltage Range: 2.5V to 25V 3A, 42V Internal Switch High Efficiency Power Conversion: Up to 93% Drives LEDs in Boost, Buck-Boost or Buck Mode Frequency Set by External Resistor: 200kHz to 3.5MHz Programmable Soft-Start Low VCESAT Switch: 0.3V at 2.5A Capable of Positive and Negative Output Voltages (Boost, Inverting, SEPIC, Flyback) Available in Thermally Enhanced 20-Lead (4mm × 4mm) QFN and 20-Lead TSSOP Packages

100V Current Mode Synchronous Switching Regulator Controller Features: High Voltage Operation: Up to 100V Large 1Ω Gate Drivers No Current Sense Resistor Required Dual N-Channel MOSFET Synchronous Drive Extremely Fast Transient Response ±0.5% 0.8V Voltage Reference Programmable Output Voltage Tracking/Soft-Start Generates 10V Driver Supply from Input Supply Synchronizable to External Clock Selectable Pulse Skip Mode Operation Power Good Output Voltage Monitor Adjustable On-Time/Frequency: tON(MIN) < 100ns Adjustable Cycle-by-Cycle Current Limit Programmable Undervoltage Lockout Output Overvoltage Protection 28-Pin SSOP Package