Microprocessor Supervisory Circuit Features:Pin-compatible with MAX1232 and Dallas DS1232Adjustable precision voltage monitor with 4.5 V and 4.75 V optionsAdjustable strobe monitor with 150 ms, 600 ms, or 1.2 sec optionsNo external componentsSpecified from 40C to +85C

Single/Dual-Supply High-Voltage Isolated IGBT Gate Driver with Miller Clamp Features: 13 A short-circuit source current (0 Ω gate resistance) 14 A short-circuit sink current (0 Ω gate resistance) 4.61 A peak current (2 Ω gate resistance) Output power device resistance: <1 Ω Desaturation protection Isolated desaturation fault reporting Soft shutdown on fault Miller clamp output with gate sense input Isolated fault and ready functions Low propagation delay: 55 ns typical Minimum pulse width: 50 ns Operating temperature range: −40°C to +125°C Output voltage range to 30 V Input voltage range from 2.5 V to 6 V Output and input undervoltage lockout (UVLO) Creepage distance: 7.8 mm minimum 100 kV/μs common-mode transient immunity (CMTI) 20-year lifetime for 600 V rms or 1092 V dc working voltage Safety and regulatory approvals 5 kV ac for 1 minute per UL 1577 CSA Component Acceptance Notice 5A DIN VDE V 0884-11:2017-01 VIORM = 849 V peak (reinforced) Qualified for automotive applications

Active Bias Controller Features: Automatic Gate voltage adjustment (No Calibration required) Supply Voltage: 4V to 12V Digital Voltage: 3.3V to 5V Controls both Enhancement and Depletion type devices Adjustable Drain Current up to 200mA Sink/Source Gate Current Capability Optional Internal negative voltage generation that can be disabled to use external negative rail Fast Enable/Disable Trigger-out Output for Daisy Chain Power-Up and Power-Down Sequencing

Switching Voltage Regulators LTC3824 - High Voltage Step-Down Controller With 40- A Quiescent Current

Supervisory Circuits LTC1536 - Precision Triple Supply Monitor for PCI Applications

Power Management IC Development Tools LT4320IDD-1 3-Phase Ideal Diode Bridge R

The LTC2924 is a power supply sequencer designed for use with external N-channel MOSFETs or power supplies with shutdown pins. Four power supplies can be fully sequenced by a single LTC2924 and up to five supplies can be sequenced to a sixth master supply. The LTC2924 requires a minimum of external components, using only two feedback resistors per sequenced power supply and a single resistor to set hysteresis.An internally regulated charge pump provides gate drive voltages for external logic and sub-logic-level MOSFETs. Adding a single capacitor enables an adjustable time delay between power supplies during both Power On and Power Off sequencing. A second capacitor can be added to enable a power good timer for detecting the failure of any power supply to turn on within the selected time. Errors in power supply sequencing and the control input are detected and reported at the FAULT output. The LTC2924 features precision input comparators which can provide 1% accuracy in monitoring power supply voltages.Multiple LTC2924s may be easily cascaded to sequence a virtually unlimited number of power supplies.Applications Sequenced Power Supplies for ASICs with Multiple I/O and Core Voltages Latch-Up Prevention in Systems with Multiple Power Supplies

Power Management IC Development Tools LT4356CDE-2 Demo - Overvoltage Protectio

The ADM1069 Super Sequencer® is a configurable supervisory/sequencing device that offers a single-chip solution for supplymonitoring and sequencing in multiple supply systems. In additionto these functions, the ADM1069 integrates a 12-bit analog-todigitalconverter (ADC) and four 8-bit voltage output digital-toanalogconverters (DACs). These circuits can implement a closedloopmargining system that enables supply adjustment by alteringeither the feedback node or reference of a dc-to-dc converterusing the DAC outputs.For more information about the ADM1069 register map, referto the AN-721 Application Note.Applications Central office systems Servers/routers Multivoltage system line cards DSP/FPGA supply sequencing In-circuit testing of margined supplies

The AD580 is a three-terminal, low cost, temperature compensated, bandgap voltage reference which provides a fixed 2.5 V output for inputs between 4.5 V and 30 V. A unique combination of advanced circuit design and laser-wafer trimmed thin-film resistors provide the AD580 with an initial tolerance of ±0.4%, a temperature stability of better than 10 ppm/°C and long-term stability of better than 250µV. In addition, the low quiescent current drain of 1.5 mA max offers a clear advantage over classical Zener techniques.The AD580 is recommended as a stable reference for all 8-, 10- and 12-bit D-to-A converters that require an external reference. In addition, the wide input range of the AD580 allows operation with 5 volt logic supplies making the AD580 ideal for digital panel meter applications or whenever only a single logic power supply is available. The AD580J, K, L and M are specified for operation over the 0°C to +70°C temperature range; the AD580S, T and U are specified for operation over the extended temperature range of -55°C to +125°C.