The ADL5536 is a 20 dB linear amplifier that operates atfrequencies up to 1 GHz. The device can be used in a widevariety of cellular, CATV, military, and instrumentationequipment.The ADL5536 provides the highest dynamic range availablefrom an internally matched IF gain block. This is accomplishedby providing extremely low noise figures and very high OIP3specifications simultaneously across the entire 1 GHz frequencyrange. The ADL5536 also provides extremely flat gain and P1dBover frequency, which are stable over temperature, power supply,and from device to device.The device is internally matched to 50 Ω at the input and output,making the ADL5536 very easy to implement in a wide varietyof applications. Only input/output ac coupling capacitors, powersupply decoupling capacitors, and an external inductor arerequired for operation.The ADL5536 is fabricated on a GaAs HBT process and has anESD rating of ±2 kV (Class 2). The device is assembled in anMSL-1 rated SOT-89 package that uses an exposed paddle forexcellent thermal impedance.The ADL5536 consumes only 105 mA on a single 5 V supplyand is fully specified for operation from −40°C to +85°C.The ADL5536 is also pin-compatible with the 16 dB gainADL5535. Fully populated evaluation boards are availablefor each amplifier.

The ADuCRF101 is a fully integrated, data acquisition solution that is designed for low power, wireless applications. It features a 12-bit analog-to-digital converter (ADC), a low power ARM Cortex™-M3 processor, a 862 MHz to 928 MHz and 431 MHz to 464 MHz RF transceiver, and Flash®/EE memory. The ADuCRF101 is packaged in a 9 mm × 9 mm LFCSP.The data acquisition section consists of a 12-bit SAR ADC. The six inputs can be configured in single-ended or differential mode. When configured in single-ended mode, they can be used for ratiometric measurements on sensors that are powered, when required, from the internal low dropout regulator (LDO). An internal battery monitor channel and an on-chip temperature sensor are also available.This wireless data acquisition system is designed to operate in battery-powered applications where low power is critical. The device can be configured in normal operating mode or different low power modes under direct program control. In flexi mode, any peripheral can wake up the device and operate it. In hibernate mode, the internal wake-up timer remains active. In shutdown mode, only an external interrupt can wake up the device.The ADuCRF101 integrates a low power ARM Cortex-M3 processor. It is a 32-bit RISC machine, offering up to 1.25 DMIPS peak performance. The ARM Cortex-M3 processor also has a flexible 14-channel direct memory access (DMA) controller that supports communication peripherals, serial peripheral interface (SPI), UART, and I2C. Also provided on chip are 128 kB of nonvolatile Flash/EE memory and 16 kB of SRAM.A 16 MHz on-chip oscillator generates the system clock. This clock can be internally divided for the processor to operate at a lower frequency, thus saving power. A low power, internal 32 kHz oscillator is available and can be used to clock the four timers, as follows: two general-purpose timers, a wake-up timer, and a system watchdog timer.A range of communication peripherals can be configured, as required, in a specific application. These peripherals include UART, I2C, SPI, GPIO ports, PWM, and RF transceivers.The RF transceiver communicates in the 862 MHz to 928 MHz and 431 MHz to 464 MHz frequency bands using multiple configurations.On-chip factory firmware supports in-circuit serial download via the UART, and nonintrusive emulation and program download are also supported via the serial wire interface. These features are incorporated into a low cost development system supporting this precision analog microcontroller family.The ADuCRF101 operates from 2.2 V to 3.6 V and is specified over an industrial temperature range of −40°C to +85°C. It is available in a 64-lead LFCSP packageApplications Battery powered wireless sensor Medical telemetry systems Industrial and home automation Asset tracking Security systems (access systems) Health and fitness applications  

The ADF4350 allows implementation of fractional-N orinteger-N phase-locked loop (PLL) frequency synthesizersif used with an external loop filter and external referencefrequency.The ADF4350 has an integrated voltage controlled oscillator(VCO) with a fundamental output frequency ranging from2200 MHz to 4400 MHz. In addition, divide-by-1/2/4/8 or 16circuits allow the user to generate RF output frequencies as lowas 137.5 MHz. For applications that require isolation, the RFoutput stage can be muted. The mute function is both pin- andsoftware-controllable. An auxiliary RF output is also available,which can be powered down if not in use.Control of all the on-chip registers is through a simple 3-wireinterface. The device operates with a power supply rangingfrom 3.0 V to 3.6 V and can be powered down when not in use.Applications Wireless infrastructure (W-CDMA, TD-SCDMA, WiMAX, GSM, PCS, DCS, DECT) Test equipment Wireless LANs, CATV equipment Clock generation

RF Amplifier InGaP HBT Gain Block amp SMT, DC - 6 GHz

Phase Locked Loops - PLL PLL + VCO 2040-2540MHz /2 x2

RF Wireless Misc x2 Active mult Chip, 32 - 46 GHz Fout

RF Amplifier 1 Watt pow amp Chip 16 - 24 GHz

Phase Locked Loops - PLL PLL/VCO MCM (9.6-10.8 GHz)

Modulator/Demodulator GaAs MMIC Bi-Phase Mod Chip 6 - 11 GHz

Attenuators