Modulator/Demodulator 2nd gen DVB-T2/T/C demodulator. QFN-48, 7x7mm - RoHS compliant

BiCMOS MMIC Mixer w/ Integrated LO Amplifier, 2.0 - 2.7 GHz Features: High Output IP3: +35 dBm Low Conversion Loss: 7.5 dB Low LO Drive: 0 dBm Optimized for Low Side LO Input Upconversion & Downconversion 24 Lead 4 × 4mm SMT Package: 16mm2

Low Distortion IF Amplifier/ADC Driver with Digitally Controlled Gain Features: Output IP3 at 100MHz: 40dBm Maximum Output Power: 16dBm Bandwidth: LF to 540MHz Propagation Delay: 0.8ns Maximum Gain: 27dB Gain Control Range: 22.5dB Gain Control Step: 1.5dB Gain Control Settling Time: 500ns Noise Figure: 8.6dB at 100MHz (Max Gain) Output Noise Floor: –138dBm/Hz (Max Gain) Reverse Isolation: –92dB Single Supply: 4.75V to 5.25V Shutdown Mode Enable/Disable Time: 1µs Differential I/O Interface 20-Lead TSSOP Package

1.5GHz to 2.4GHz High Linearity Direct Quadrature Modulator Features: Direct Conversion to 1.5GHz to 2.4GHz High OIP3: 21.8dBm at 2GHz Low Output Noise Floor at 5MHz Offset: No RF: –159.3dBm/Hz POUT = 4dBm: –151.8dBm/Hz 4-Ch W-CDMA ACPR: –66dBc at 2.14GHz Integrated LO Buffer and LO Quadrature Phase Generator 50Ω AC-Coupled Single-Ended LO and RF Ports 50Ω DC Interface to Baseband Inputs Low Carrier Leakage: –42dBm at 2GHz High Image Rejection: 45dB at 2GHz 16-Lead QFN 4mm × 4mm Package

1.5GHz to 2.5GHz High Linearity Direct Quadrature Modulator Features: Direct Conversion from Baseband to RF High Output: –2.5dB Conversion Gain High OIP3: +21.6dBm at 2GHz Low Output Noise Floor at 20MHz Offset: No RF: –158.6dBm/Hz POUT = 4dBm: –152.5dBm/Hz Low Carrier Leakage: –39.4dBm at 2GHz High Image Rejection: –41.2dBc at 2GHz 4-Channel W-CDMA ACPR: –67.7dBc at 2.14GHz Integrated LO Buffer and LO Quadrature Phase Generator 50Ω AC-Coupled Single-Ended LO and RF Ports High Impedance DC Interface to Baseband Inputs with 0.5V Common Mode Voltage 16-Lead QFN 4mm × 4mm Package

800MHz to 2.7GHz High Linearity Direct Conversion Quadrature Demodulator Features: Input Frequency Range: 0.8GHz to 2.7GHz* 50Ω Single-Ended RF and LO Ports High IIP3: 28dBm at 900MHz, 22.6dBm at 1.9GHz High IIP2: 54.1dBm at 900MHz, 60dBm at 1.9GHz Input P1dB: 13.2dBm at 900MHz I/Q Gain Mismatch: 0.04dB Typical I/Q Phase Mismatch: 0.4° Typical Low Output DC Offsets Noise Figure: 12.8dB at 900MHz, 12.7dB at 1.9GHz Conversion Gain: 3dB at 900MHz, 4.2dB at 1.9GHz Very Few External Components Shutdown Mode 16-Lead QFN 4mm × 4mm Package with Exposed Pad

1.5GHz to 3.8GHz High Linearity Upconverting Mixer Features: High Output IP3: +27.3dBm at 2.14GHz Low Noise Floor: –158dBm/Hz (POUT = –5dBm) High Conversion Gain: 2.6dB at 2.14GHz Wide Frequency Range: 1.5GHz to 3.8GHz* Low LO Leakage Single-Ended RF and LO Low LO Drive Level: –1dBm Single 3.3V Supply 5mm × 5mm QFN24 Package

The MAX7034 fully integrated low-power CMOS super-heterodyne receiver is ideal for receiving amplitude-shift-keyed (ASK) data in the 300MHz to 450MHz frequency range (including the popular 315MHz and 433.92MHz frequencies). The receiver has an RF sensitivity of -114dBm. With few external components and a low-current power-down mode, it is ideal for cost-sensitive and power-sensitive applications typical in the automotive and consumer markets. The MAX7034 consists of a low-noise amplifier (LNA), a fully differential image-rejection mixer, an on-chip phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO), a 10.7MHz IF limiting amplifier stage with received-signal-strength indicator (RSSI), and analog baseband data-recovery circuitry.The MAX7034 is available in a 28-pin (9.7mm x 4.4mm) TSSOP package and is specified over the automotive (-40°C to +125°C) temperature range.ApplicationsAutomotive Remote Keyless EntryGarage Door OpenersHome AutomationLocal TelemetryRemote ControlsSecurity SystemsWireless Sensors

The MAX7034 fully integrated low-power CMOS super-heterodyne receiver is ideal for receiving amplitude-shift-keyed (ASK) data in the 300MHz to 450MHz frequency range (including the popular 315MHz and 433.92MHz frequencies). The receiver has an RF sensitivity of -114dBm. With few external components and a low-current power-down mode, it is ideal for cost-sensitive and power-sensitive applications typical in the automotive and consumer markets. The MAX7034 consists of a low-noise amplifier (LNA), a fully differential image-rejection mixer, an on-chip phase-locked loop (PLL) with integrated voltage-controlled oscillator (VCO), a 10.7MHz IF limiting amplifier stage with received-signal-strength indicator (RSSI), and analog baseband data-recovery circuitry.The MAX7034 is available in a 28-pin (9.7mm x 4.4mm) TSSOP package and is specified over the automotive (-40°C to +125°C) temperature range.ApplicationsAutomotive Remote Keyless EntryGarage Door OpenersHome AutomationLocal TelemetryRemote ControlsSecurity SystemsWireless Sensors

The MAX9930–MAX9933 low-cost, low-power logarithmic amplifiers are designed to control RF power amplifiers (PA) and transimpedance amplifiers (TIA), and to detect RF power levels. These devices are designed to operate in the 2MHz to 1.6GHz frequency range. A typical dynamic range of 45dB makes this family of logarithmic amplifiers useful in a variety of wireless and GPON fiber video applications such as transmitter power measurement, and RSSI for terminal devices. Logarithmic amplifiers provide much wider measurement range and superior accuracy to controllers based on diode detectors. Excellent temperature stability is achieved over the full operating range of -40°C to +85°C.The choice of three different input voltage ranges eliminates the need for external attenuators, thus simplifying PA control-loop design. The logarithmic amplifier is a voltage-measuring device with a typical signal range of -58dBV to -13dBV for the MAX9930/MAX9933, -48dBV to -3dBV for the MAX9931, and -43dBV to +2dBV for the MAX9932.The MAX9930–MAX9933 require an external coupling capacitor in series with the RF input port. These devices feature a power-on delay when coming out of shutdown, holding OUT low for approximately 2.5µs to ensure glitch-free controller output.The MAX9930–MAX9933 family is available in an 8-pin µMAX® package. These devices consume 7mA with a 5V supply, and when powered down, the typical shutdown current is 13µA.ApplicationsRSSI for Fiber Modules, GPON-CATV TriplexorsLow-Frequency RF OOK and ASK ApplicationsTransmitter Power Measurement and ControlTSI for Wireless Terminal DevicesCellular Handsets (TDMA, CDMA, GPRS, GSM)