Ethernet Modules Ha-VIS eCon 2160-A 16 port

RF System on a Chip - SoC 2.4G Single-BandWLAN 802.11n+BT4.1+FMRx

RF Development Tools WIT2410 Module Development Kit

QPL8830 5MHz to 1218MHz 75Ohm 21dB CATV Amplifier Evaluation Board

Phase Locked Loops - PLL

Modulator/Demodulator DVB-S2/S Digital Satellite Demodualtor

RF Adapters - In Series SMA / FEMALE - FEMALE ADAPTER

The MAX2066 high-linearity digital variable-gain amplifier (VGA) is a monolithic SiGe BiCMOS attenuator and amplifier designed to interface with 50Ω systems operating in the 50MHz to 1000MHz frequency range (See the Typical Application Circuit in the full data sheet). The digital attenuator is controlled as a slave peripheral using either the SPI™-compatible interface or a parallel bus with 31dB total adjustment range in 1dB steps. An added feature allows 'rapid-fire' gain selection between each of four steps, preprogrammed by the user through the SPI-compatible interface. The 2-pin control allows the user to quickly access any one of four customized attenuation states without reprogramming the SPI bus.Because each stage has its own RF input and RF output, this component can be configured to either optimize NF (amplifier configured first), or OIP3 (amplifier last). The device's performance features include 22dB amplifier gain (amplifier only), 5.2dB NF at maximum gain (includes attenuator insertion loss), and a high OIP3 level of +42.4dBm. Each of these features makes the MAX2066 an ideal VGA for numerous receiver and transmitter applications.In addition, the MAX2066 operates from a single +5V supply with full performance, or a single +3.3V supply with slightly reduced performance, and has an adjustable bias to trade current consumption for linearity performance. This device is available in a compact 40-pin thin QFN package (6mm x 6mm) with an exposed pad. Electrical performance is guaranteed over the extended temperature range (TC = -40°C to +85°C).ApplicationsCable Modem Termination Systems (CMTS)Cellular Band WCDMA and cdma2000® Base StationsFixed Broadband Wireless AccessGSM 850/GSM 900 EDGE Base StationsIF and RF Gain StagesMilitary SystemsRFID Handheld and Portal ReadersVideo-on-Demand (VOD) and DOCSIS®-Compliant EDGE QAM ModulationWiMAX and LTE Base Stations and Customer Premise EquipmentWireless Local Loop

The MAX2172 direct-conversion to low-IF tuner is designed for digital audio broadcast (DAB) and terrestrial digital multimedia broadcast (T-DMB) applications, covering an input frequency range of 168MHz to 240MHz (VHF-III), 1452MHz to 1492MHz (L-band), and also 87MHz to 108MHz (FM). The MAX2172 achieves a high level of component integration, allowing lowpower, tuner-on-board designs. The direct-conversion to low-IF architecture eliminates the need for an IF-SAW filter while providing a balanced 2.048MHz center frequency baseband output to the demodulator.The MAX2172 provides a buffered reference clock at the crystal frequency.A sigma-delta fractional-N synthesizer is incorporated to optimize both close-in and wideband phase noise performances for OFDM applications where sensitivity to both 1kHz phase noise and wideband phase noise related to strong adjacents can be a problem.The MAX2172 is available in a 40-pin thin QFN package (6mm x 6mm) with an exposed pad. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.ApplicationsFixed and Mobile Digital Audio Broadcast (DAB, DAB+) with FMTerrestrial Digital Multimedia Broadcast (T-DMB) with FM

The MAX19790 is a dual, general-purpose analog voltage variable attenuator (VVA) designed to interface with 50Ω systems operating in the 250MHz to 4000MHz frequency range. Each attenuator includes a control circuit that provides 22dB of attenuation range with a linear control slope of 10dB/V.Both attenuators share a common analog control and can be cascaded together to yield 44dB of total dynamic range, with a combined linear control slope of 20dB/V.The IC is a monolithic device designed on one of Maxim's proprietary SiGe BiCMOS processes. The device operates from a single +5.0V supply and is available in a compact, 36-pin thin QFN package (6mm x 6mm x 0.8mm) with an exposed pad. Electrical performance is guaranteed over the extended -40°C to +85°C temperature range.ApplicationsAutomatic Level Control (ALC)Broadband System Applications, Including Wireless Infrastructure Digital and Spread-Spectrum Communication SystemsGeneral Test EquipmentLineup Gain TrimMicrowave Terrestrial LinksReceiver Gain ControlTemperature Compensation CircuitsTransmitter Gain ControlVSAT/Satellite ModemsWCDMA/LTE, TD-SCDMA/TD-LTE, WiMAX®, cdma2000®, GSM/EDGE and MMDS Base Stations