Dual 10GHz GBW, 1.1nV/Hz Differential Amplifier/ADC Driver Features: 10GHz Gain-Bandwidth Product 85dB SFDR at 100MHz, 2VP-P 1.1nV/√Hz Input Noise Density Channel Separation 95dB at 100MHz Input Range Includes Ground External Resistors Set Gain (Min 1V/V) 3300V/μs Differential Slew Rate 52mA Supply Current (Per Amplifier) 2.7V to 5.25V Supply Voltage Range Fully Differential Input and Output Adjustable Output Common Mode Voltage Low Power Shutdown Small 20-Lead 4mm × 3mm × 0.75mm LQFN Package

Doubler Charge Pumps with Low Noise Linear Regulator Features: Low Output Noise: 60µVRMS (100kHz BW) Adjustable or Fixed Boosted Output Adjustable Output Voltage Range: 2.5V to 5.5V Fixed Output Voltages: 3.3V, 5V Wide Input Voltage Range: 1.8V to 4.4V Uses Small Ceramic Capacitors No Inductors Required Output Current up to 50mA 550kHz Switching Frequency Low Operating Current: 150µA Low Shutdown Current: 1µA Internal Thermal Shutdown and Current Limiting Available in 8-Pin MSOP and SO Packages

36V Battery Charger and Power Backup Manager Features: Seamless Transition Between Primary Power Source and Li-Ion Battery 2A High Voltage Step-Down Regulator with Adaptive Output Control Internal 75mΩ Ideal Diode Plus Optional External Ideal Diode Controller Provides Low Loss PowerPath™ When Primary Supply Not Present Wide Input Voltage Range: 6V to 36V (60V Abs Max) 4.45V Max Output Voltage Full Featured Li-Ion Battery Charger Pin Selectable 4.1V and 4.2V Charge Voltage Options Thermally Enhanced Low Profile (0.75mm) 6mm × 3mm 22-Lead DFN Package

Dual, 16-Bit, 666ksps/ch Differential SoftSpan ADC with Wide Input Common Mode Range Features: 666ksps per Channel Throughput Two Simultaneous Sampling Channels ±1.25LSB INL (Maximum) Guaranteed 16-Bit, No Missing Codes Differential, Wide Common Mode Range Inputs Per-Channel SoftSpan Input Ranges: ±4.096V, 0V to 4.096V, ±2.048V, 0V to 2.048V ±5V, 0V to 5V, ±2.5V, 0V to 2.5V 93.4dB Single-Conversion SNR (Typical) −114dB THD (Typical) at fIN = 2kHz 105dB CMRR (Typical) at fIN = 200Hz Rail-to-Rail Input Overdrive Tolerance Guaranteed Operation to 125°C Integrated Reference and Buffer (4.096V) SPI CMOS (1.8V to 5V) and LVDS Serial I/O Internal Conversion Clock, No Cycle Latency 74mW Power Dissipation (Typical) 32-Lead (5mm × 5mm) QFN Package

60V Dual Output Step-Down Controller with Digital Power System Management Features: PMBus/I2C Compliant Serial Interface Telemetry Read-Back Includes VIN, IIN, VOUT, IOUT, Temperature and Faults Programmable Voltage, Current Limit, Digital Soft-Start/Stop, Sequencing, Margining, OV/UV/OC, Frequency, and Control Loop Compensation Output Error Less Than ±0.5% Over Temperature Integrated 16-Bit ADC and 12-Bit DAC Integrated High Side Current Sense Amplifier Internal EEPROM with ECC and Fault Logging Integrated N-Channel MOSFET Gate DriversPower Conversion Wide VIN Range: 5V to 60V VOUT0, VOUT1 Range: 1V to 40V Analog Current Mode Control Accurate PolyPhase® Current Sharing for Up to 6 Phases (85kHz to 500kHz) Available in a 52-Lead (7mm× 8mm) QFN Package

2.5A Supercapacitor Backup Power Manager Features: 2.5A Step-Down Supercapacitor Charger and 2.5A Step-Up Backup Supply 6.5A Switches for 2.5A Backup from One Supercapacitor or Two in Series Input Current Limit Prioritizes Load over Charge Current Input Disconnect Switch Isolates Input During Backup Automatic Seamless Switch-Over to Backup Mode Internal Supercapacitor Balancer (No External Resistors) Programmable Charge Current and Charge Voltage Input Power Fail Indicator System Power Good Indicator Optional OVP Circuitry Protects Device to >60V Constant Frequency Operation Thermally Enhanced 24-Lead 4mm × 5mm QFN Package

3GHz to 20GHz Microwave Mixer with Wideband DC to 6GHz IF Features:Integrated LO Buffer: 0dBm LO Drive50 Wideband Matched RF and LO PortsWide IF Bandwidth: DC to 6GHzUpconversion or DownconversionHigh IIP3:+22.5dBm at 10GHz+18.3dBm at 17GHz+14.6dBm Input P1dB at 10GHz8dB Conversion Loss at 10GHz3.3V/132mA SupplyFast Turn ON/OFF for TDD Operation3mm × 2mm, 12-Lead QFN Package

Very Low Noise, Low Distortion Active RC Quad Universal Filter Features: Continuous Time—No Clock Four 2nd Order Filter Sections, 20kHz to 300kHz Center Frequency Butterworth, Chebyshev, Elliptic or Equiripple Delay Response Lowpass, Bandpass, Highpass Responses 99dB Typical S/N, ±5V Supply (Q = 1) 93dB Typical S/N, Single 5V Supply (Q = 1) Rail-to-Rail Input and Output Voltages DC Accurate to 3mV (Typ) ±0.5% Typical Center Frequency Accuracy “Zero-Power” Shutdown Mode Single or Dual Supply, 5V to 10V Total Resistor-Programmable fO, Q, Gain

EN55022B Compliant 58V, 4A Step-Down DC/DC Module Regulator Features: Complete Low EMI Switch Mode Power Supply EN55022 Class B Compliant Wide Input Voltage Range: 3.1V to 58V Up to 4A Output Current Output Voltage Range: 0.5V ≤ VOUT ≤ 0.94 • VIN ±1.67% Total DC Output Voltage Error Over Line, Load and Temperature (–40°C to 125°C) Parallel and Current Share with Multiple LTM4653s Analog Output Current Indicator Programmable Input Voltage Limiting Constant-Frequency Current Mode Control Power Good Indicator and Programmable Soft-Start Overcurrent/Overvoltage/Overtemperature Protection 15mm × 9mm × 5.01mm BGA Package

Dual 50A or Single 100A Module Regulator with Digital Power System Management Features: Dual 50A or Single 100A Digitally Adjustable Outputs with Digital Interface for Control, Compensation and Monitoring Wide Input Voltage: 4.5V to 16V Output Voltage Range: 0.5V to 1.8V ~90% Full Load Efficiency from 12VIN to 1VOUT at 100A ±0.5% Maximum DC Output Error Over Temperature ±3% Current Readback Accuracy (25°C to 125°C) Integrated Input Current Sense Amplifier 400kHz PMBus-Compliant I2C Serial Interface Supports Telemetry Polling Rates Up to 125Hz Integrated 16-Bit Σ ADC Constant Frequency Current Mode Control Parallel and Current Share Multiple Modules 15mm × 22mm × 7.87mm BGA PackageReadable Data: Input and Output Voltages, Currents, and Temperatures Running Peak Values, Uptime, Faults and Warnings Internal EEPROM and Fault Logging with ECCWritable Data and Configurable Parameters: Output Voltage, Voltage Sequencing and Margining Digital Soft-Start/Stop Ramp Optimize Analog Loop Compensation OV/UV/OT, UVLO, Frequency and Phasing