The ADG1611 / ADG1612 / ADG1613 contain four independent single-pole/single-throw (SPST) switches. The ADG1611 and ADG1612 differ only in that the digital control logic is inverted. The ADG1611 switches are turned on with Logic 0 on the appropriate control input, while Logic 1 is required for the ADG1612 switches. The ADG1613 has two switches with digital control logic similar to that of the ADG1611; the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked.The ADG1613 exhibits break-before-make switching action for use in multiplexer applications. Inherent in the design is the low charge injection for minimum transients when switching the digital inputs. The ultralow on resistance of these switches make them ideal solutions for data acquisition and gain switching applications where low on resistance and distortion is critical. The on resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals. The CMOS construction ensures ultralow power dissipation, making them ideally suited for portable and battery-powered instruments.PRODUCT HIGHLIGHTS 1.6 Ω maximum on resistance over temperature Minimum distortion: THD + N = 0.007% 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V No VL logic power supply required. Ultralow power dissipation: <16 nW 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSPAPPLICATIONS Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements

The ADG1611 / ADG1612 / ADG1613 contain four independent single-pole/single-throw (SPST) switches. The ADG1611 and ADG1612 differ only in that the digital control logic is inverted. The ADG1611 switches are turned on with Logic 0 on the appropriate control input, while Logic 1 is required for the ADG1612 switches. The ADG1613 has two switches with digital control logic similar to that of the ADG1611; the logic is inverted on the other two switches. Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked.The ADG1613 exhibits break-before-make switching action for use in multiplexer applications. Inherent in the design is the low charge injection for minimum transients when switching the digital inputs. The ultralow on resistance of these switches make them ideal solutions for data acquisition and gain switching applications where low on resistance and distortion is critical. The on resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals. The CMOS construction ensures ultralow power dissipation, making them ideally suited for portable and battery-powered instruments. PRODUCT HIGHLIGHTS 1.6 Ω maximum on resistance over temperature Minimum distortion: THD + N = 0.007% 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V No VL logic power supply required. Ultralow power dissipation: <16 nW 16-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSPAPPLICATIONS Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements

The ADG4612 & ADG4613 contain four independent single-pole/single-throw (SPST) switches. The ADG4612 switches areturned on with Logic 1 on the appropriate control input. TheADG4613 has two switches with digital control logic similar tothat of the ADG4612; the logic is inverted on the other twoswitches. Each switch conducts equally well in both directionswhen on and has an input signal range that extends to thesupplies. The ADG4613 exhibits break-before-make switchingaction for use in multiplexer applications.When no power supplies are present the switch remains in theOFF condition and the switch inputs are high impedanceinputs. This ensures that no current flows that may damage theswitch. This is very useful in application where analog signalsmay be present at the switch inputs before power or where theuser has no control over the Power Supply Sequence.In the off condition, signal levels up to 16V are blocked. Also, ifthe analog input signal levels exceed VDD by VT then the switchwill turn off.The ultralow on resistance of these switches make them idealsolutions for data acquisition and gain switching applicationswhere low on resistance and distortion is critical. The onresistance profile is very flat over the full analog input rangeensuring excellent linearity and low distortion when switchingaudio signals.APPLICATIONS Hot swap applications Data acquisition systems Battery-powered systems Automatic test equipment Communication systems Relay ReplacementPRODUCT HIGHLIGHTS Power-Off Protection On Both S and D Pins. PSS Robustness. Overvoltage Protection up to 16 V. 5.2 Ω On Resistance. 16-Lead TSSOP and 3 mm × 3 mm LFCSP Packages.

The ADG5436 is a monolithic CMOS device containing twoindependently selectable single-pole/double-throw (SPDT)switches. An EN input on the LFCSP package enables or disablesthe device. When disabled, all channels switch off. Each switch conducts equally well in both directions when on and has aninput signal range that extends to the supplies. In the off condition,signal levels up to the supplies are blocked. Both switches exhibitbreak-before-make switching action for use in multiplexerapplications.The on-resistance profile is very flat over the full analog input range, ensuring excellent linearity and low distortion when switching audio signals.Product Highlights Trench isolation guards against latch-up. A dielectric trench separates the P and N channel transistors thereby preventing latch-up even under severe overvoltage conditions. Low RON. Dual-supply operation. For applications where the analog signal is bipolar, the ADG5436 can be operated from dual supplies up to ±22 V. Single-supply operation. For applications where the analog signal is unipolar, the ADG5436 can be operated from a single-rail power supply up to 40 V. 3 V logic compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V. No VL logic power supply required.Applications Relay replacement Automatic test equipment Data acquisition Instrumentation Avionics Audio and video switching Communication systems

The ADG1406 and ADG1407 are monolithic iCMOS® analogmultiplexers comprising 16 single channels and eight differentialchannels, respectively. The ADG1406 switches one of 16 inputsto a common output, as determined by the 4-bit binary addresslines (A0, A1, A2, and A3). The ADG1407 switches one of eightdifferential inputs to a common differential output, as determinedby the 3-bit binary address lines (A0, A1, and A2). An EN inputon both devices enables or disables the device. When disabled,all channels switch off. When on, each channel conducts equallywell in both directions and has an input signal range that extendsto the supplies.The iCMOS (industrial CMOS) modular manufacturingprocess combines high voltage CMOS (complementary metaloxidesemiconductor) and bipolar technologies. It enables thedevelopment of a wide range of high performance analog ICscapable of 33 V operation in a footprint that no other generationof high voltage parts has been able to achieve. Unlike analog ICsusing conventional CMOS processes, iCMOS components cantolerate high supply voltages while providing increased performance,dramatically lower power consumption, and reducedpackage size.The ultralow on resistance and on-resistance flatness of theseswitches make them ideal solutions for data acquisition andgain switching applications where low distortion is critical.iCMOS construction ensures ultralow power dissipation,making the parts ideally suited for portable and battery-poweredinstruments. Applications Medical equipment Audio and video routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Communication systems

9.5 RON 15 V/+12 V/5 V iCMOS Serially-Controlled Octal SPST Switches Features: SPI interface Supports daisy-chain mode 10 Ω maximum on resistance 0.5 Ω on-resistance flatness Fully specified at ±15 V, +12 V 3 V logic-compatible inputs Rail-to-rail operation 24-lead TSSOP and 24-lead 4 mm × 4 mm LFCSP

User Defined Fault Protection and Detection, 0.8 pC QINJ, Dual 4:1 Multiplexers Features: User defined secondary supplies set overvoltage level Overvoltage protection up to −55 V and +55 V Power-off protection up to −55 V and +55 V Overvoltage detection on source pins Minimum secondary supply level: 4.5 V single-supply Interrupt flags indicate fault status Low charge injection (QINJ): 0.8 pC Low drain/source on capacitance: 14 pF Latch-up immune under any circumstance Known state without digital inputs present VSS to VDD analog signal range ±5 V to ±22 V dual-supply operation 8V to 44 V single-supply operation Fully specified at ±15 V, ±20 V, +12 V, and +36 V 

Bidirectional Fault Protection and Detection, 10 RON, Quad SPST Switches Features: Overvoltage protection up to −55 V and +55 V Power-off protection up to −55 V and +55 V Overvoltage detection on source and drain pins Low on resistance: 10 On-resistance flatness of 0.5 3 kV human body model (HBM) ESD rating Latch-up immune under any circumstance Known state without digitals present VSS to VDD analog signal range ±5 V to ±22 V dual supply operation 8 V to 44 V single-supply operation Fully specified at ±15 V, ±20 V, +12 V, and +36 V

8-Channel/4-Channel Fault-Protected Analog Multiplexer Features: All switches off with power supply off Analog output of on channel clamped within power supplies if an overvoltage occurs Latch-up proof construction Fast Switching Times: tON 230 ns maximum tOFF 130 ns maximum Low on resistance (270 Ω typical) Low power dissipation (3.3 mW maximum) Fault and overvoltage protection (−40 V to +55 V) Break-before-make construction TTL and CMOS compatible inputs

High Temperature (up to 210C), Low Voltage 8-Channel Multiplexer Features: Download ADG798-KGD Data Sheet. Available as Known Good and fully guaranteed to data sheet specifications. Extreme high temperature operation Specified temperature range −55°C to +210°C (16-lead FLATPACK) −55°C to +175°C (16-lead TSSOP) 3.0 V to 5.5 V single supply ±2.5 V dual supply 10 Ω on resistance, maximum 2 Ω on resistance flatness, maximum 12 ns switching times Single 8:1 multiplexer Low power consumption TTL-/CMOS-compatible inputs