SPDT Positive Control Swt DC - 6 GHz

Multiplexer Switch ICs Precision, 16-Channel/Dual 8-Channel, Low-Voltage, CMOS Analog Multiplexers

The ADG888 is a low voltage, dual DPDT (double-pole,double-throw) CMOS device optimized for high performanceaudio switching. With its low power and small physical size, it isideal for portable devices.This device offers ultralow on resistance of less than 0.8 ? overthe full temperature range, making it an ideal solution forapplications requiring minimal distortion through the switch.The ADG888 also has the capability of carrying large amountsof current, typically 400 mA at 5 V operation.When on, each switch conducts equally well in both directionsand has an input signal range that extends to the supplies. TheADG888 exhibits break-before-make switching action.The ADG888 is available in a 16-ball WLCSP, 16-lead LFCSP,and a 16-lead TSSOP. These packages make the ADG888 the ideal solution for space-constrained applications.Product Highlights <0.6 ? over full temperature range of ?40?C to +125?C. High current handling capability (400 mA continuous current at 5 V). Low THD + N (0.008% typical). Tiny 16-ball WLCSP, 16-lead LFCSP, and 16-lead TSSOP. Applications Cellular phones? PDAs? MP3 players? Power routing? Battery-powered systems? PCMCIA cards? Modems? Audio and video signal routing? Communication systems? Data switching

The AD8113 is a fully buffered crosspoint switch matrix that operates on ?12V for Audio applications and ?5V for Video applications. It offers a -3dB signal bandwidth greater than 60MHz and channel switch times of less than 60ns with 0.1% settling for use in both analog and digital audio. The AD8113 operated at 20kHz has crosstalk performance of -83dB and isolation of 90dB. In addition, ground/power pins surround all inputs and outputs to provide extra shielding for operation in the most demanding audio routing applications. The differential gain and differential phase of better than 0.1% and 0.1?, respectively, along with 0.1dB flatness out to 10MHz make the AD8113 suitable for many video applications.The AD8113 includes 16 independent output buffers that can be placed into a disabled state for paralleling crosspoint outputs so that off channel loading is minimized. The AD8113 has a gain of +2. It operates on voltage supplies of ?5V or ?12V while consuming only 34mA or 31mA of current, respectively.The channel switching is performed via a serial digital control (which can accommodate daisy-chaining of several devices) or via a parallel control, allowing updating of an individual output without reprogramming the entire array.The AD8113 is packaged in a 100-lead LQFP and is available over the commercial temperature range of 0?C to 70?C.

The AD8158 is an asynchronous, protocol-agnostic, quad-lane 2:1 switch with a total of 12 differential CML inputs and 12 differential CML outputs. The signal path supports NRZ signaling with data rates up to 6.5 Gbps per lane. Each lane offers programmable receive equalization, programmable output pre-emphasis, programmable output levels, and loss-of-signal detection.The nonblocking switch-core of the AD8158 implements a 2:1 multiplexer and 1:2 demultiplexer per lane and supports independent lane switching through the four select pins, SEL[3:0]. Each port is a four-lane link. Every lane implements an asynchronous path supporting dc to 6.5 Gbps NRZ data, fully independent of other lanes. The AD8158 has low latency and very low lane-to-lane skew.The main application of the AD8158 is to support redundancy on both the backplane and the line interface sides of a serial link. The demultiplexing path implements unicast and bicast capability, allowing the part to support either 1 + 1 or 1:1 redundancy.The AD8158 is also suited for testing high speed serial links because of its ability to duplicate incoming data. In a port-monitoring application, the AD8158 can maintain link-connectivity with a pass-through connection from Port C to Port A while sending a duplicate copy of the data to test equipment on Port B.The rich feature set of the AD8158 can be controlled either through external toggle pins or by setting on-chip control registers through the I2C interface.APPLICATIONS Low cost redundancy switch SONET OC48/SDH16 and lower data rates XAUI/GbE/FC/Infiniband over backplane OIF CEI 6.25 Gbps over backplane Serial data-level shift 4-/8-/12-lane equalizers or redrivers

Wideband, 43 dB Isolation at 1 GHz, CMOS 1.65 V to 2.75 V, 2:1 Mux/SPDT Switches Features: Wideband switch: −3 dB at 4 GHz Absorptive/reflective switches High off isolation (43 dB at 1 GHz) Low insertion loss (0.8 dB at 1 GHz) Single 1.65 V to 2.75 V power supply CMOS/LVTTL control logic 8-lead MSOP and tiny 3 mm × 3 mm LFCSP Low power consumption (<1 µA)

ANALOG MULTIPLEXERS/DEMULTIPLEXERS ROHS COMPLIANT: YES

ANALOGUE SW, 4CH, SPST-NC/NO, TSSOP-16 ROHS COMPLIANT: YES

ANALOGUE SWITCH, QUAD, SPST, LFCSP-16; No. of Channels:4Channels; Analog Switch Type:SPST; On State Resistance Max:6.1ohm; Supply Voltage Range:3V to 12, ± 3V to ± 5.5V; Analog Switch Case:LFCSP; No. of Pins:16Pins RoHS Compliant: Yes

RF Switch ICs 10W SPDT Failsafe Switch , 0.2 - 2.7 GHz