The ADG713 is a monolithic CMOS device containing four independently selectable switches. It is designed on an advanced submicron process that provides low power dissipation yet gives high switching speed, low on resistance, low leakage currents and high bandwidth.The ADG713 operates from a single +1.8 V to +5.5 V supply, making it ideal for use in battery powered instruments and with the new generation of DACs and ADCs from Analog Devices. Fast switching times and high bandwidth make the part suitable for video signal switching.The ADG713 contains two switches whose digital control logic is similar to the ADG711, while the logic is inverted on the other two switches. Each switch conducts equally well in both directions when ON. The ADG713 exhibits break-before-make switching action.The ADG713 is available in 16-lead TSSOP and 16-lead SOIC packages.

The ADG738 is a CMOS analog matrix switch with a serially-controlled 3-wire interface. The ADG738 is an 8-channel matrix switch. On resistance is closely matched between switches and very flat over the full signal range.The ADG738 utilize a 3-wire serial interface that is compatible with SPI™, QSPI™, MICROWIRE®, and some DSP interface standards. The output of the input shift register, DOUT, enables a number of these parts to be daisy-chained. On power-up, the internal input shift register contains all zeros and all switches are in the off state.Each switch conducts equally well in both directions when on, making these parts suitable for both multiplexing and demulti-plexing applications. As each switch is turned on or off by a separate bit, these parts can also be configured as a type of switch array, where any, all, or none of the eight switches may be closed at any time. The input signal range extends to the supply rails.All channels exhibit break-before-make switching action, preventing momentary shorting when switching channels.The ADG738 is available in 16-lead TSSOP packages.Product Highlights 3-Wire Serial Interface. Single Supply Operation. The ADG738 is fully specified and guaranteed with 3 V and 5 V supply rails. Low On Resistance, 2.5 Ω typical. Any configuration of switches may be on or off at any one time. Guaranteed Break-Before-Make Switching Action. Small 16-lead TSSOP Package.Applications Data Acquisition Systems Communication Systems Relay Replacement Audio and Video Switching

The ADG739 is a CMOS analog matrix switch with a serially-controlled 3-wire interface. The ADG739 is a dual 4-channel matrix switch. On resistance is closely matched between switches and very flat over the full signal range.The ADG739 utilize a 3-wire serial interface that is compatible with SPI™, QSPI™, MICROWIRE®, and some DSP interface standards. The output of the input shift register, DOUT, enables a number of these parts to be daisy-chained. On power-up, the internal input shift register contains all zeros and all switches are in the off state.Each switch conducts equally well in both directions when on, making these parts suitable for both multiplexing and demultiplexing applications. As each switch is turned on or off by a separate bit, these parts can also be configured as a type of switch array, where any, all, or none of the eight switches may be closed at any time. The input signal range extends to the supply rails.All channels exhibit break-before-make switching action, preventing momentary shorting when switching channels.The ADG739 is available in 16-lead TSSOP packages.PRODUCT HIGHLIGHTS 3-Wire Serial Interface. Single Supply Operation. The ADG739 is fully specified and guaranteed with 3 V and 5 V supply rails. Low On Resistance, 2.5 Ω typical. Any configuration of switches may be on or off at any one time. Guaranteed Break-Before-Make Switching Action. Small 16-lead TSSOP Package.APPLICATIONS Data acquisition systems Communication systems Relay replacement Audio and video switching

The ADG1206 and ADG1207 are monolithic iCMOS® analogmultiplexers comprising sixteen single channels and eightdifferential channels, respectively. The ADG1206 switches oneof sixteen inputs to a common output, as determined by the4-bit binary address lines A0, A1, A2, and A3. The ADG1207switches one of eight differential inputs to a common differentialoutput, as determined by the 3-bit binary address lines A0, A1,and A2. An EN input on both devices is used to enable or disablethe device. When disabled, all channels are switched off. Whenon, each channel conducts equally well in both directions andhas an input signal range that extends to the supplies.The industrial CMOS (iCMOS) modular manufacturingprocess combines high voltage complementary metal-oxide semiconductor (CMOS) and bipolar technologies. It enables thedevelopment of a wide range of high performance analog ICscapable of 33 V operation in a footprint that no other generationof high voltage devices has been able to achieve. Unlike analogICs using conventional CMOS processes, iCMOS componentscan tolerate high supply voltages while providing increasedperformance, dramatically lower power consumption, andreduced package size. The ultralow capacitance and exceptionally low charge injectionof these multiplexers make them ideal solutions for data acquisitionand sample-and-hold applications, where low glitch and fastsettling are required. There is minimumcharge injection over the entire signal range of the device.iCMOS construction also ensures ultralow power dissipation,making the devices ideally suited for portable and battery-poweredinstruments.Applications Audio and video routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Communication systems

The ADG1211 / ADG1212 / ADG1213 are monolithic complementary metal-oxide semiconductor (CMOS) devices containing four independently selectable switches designed on an iCMOS® (industrial CMOS) process. iCMOS is a modular manufacturing process combining high voltage CMOS and bipolar technologies. It enables the development of a wide range of high performance analog ICs capable of 33 V operation in a footprint that no previous generation of high voltage devices has been able to achieve. Unlike analog ICs using conventional CMOS processes, iCMOS components can tolerate high supply voltages while providing increased performance, dramatically lower power consumption, and reduced package size.The ultralow capacitance and charge injection of these switches make them ideal solutions for data acquisition and sample-and-hold applications, where low glitch and fast settling are required. Fast switching speed coupled with high signal bandwidth make the devices suitable for video signal switching.iCMOS construction ensures ultralow power dissipation, making the devices ideally suited for portable and battery-powered instruments.The ADG1211 / ADG1212 / ADG1213 contain four independent single-pole/single-throw (SPST) switches. The ADG1211 and ADG1212 differ only in that the digital control logic is inverted. The ADG1211 switches are turned on with Logic 0 on the appropriate control input, while Logic 1 is required for the ADG1212. The ADG1213 has two switches with digital control logic similar to that of the ADG1211; the logic is inverted on the other two switches. The ADG1213 exhibits break-before-make switching action for use in multiplexer applications.Each switch conducts equally well in both directions when on and has an input signal range that extends to the supplies. In the off condition, signal levels up to the supplies are blocked.Product Highlights Ultralow capacitance. <1 pC charge injection. 3 V logic-compatible digital inputs: VIH = 2.0 V, VIL = 0.8 V. No VL logic power supply required. Ultralow power dissipation: <0.03 μW. 16-lead TSSOP and 3 mm × 3 mm LFCSP packages.Applications Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Audio signal routing Video signal routing Communication systems

The ADG1233 and ADG1234 are monolithic iCMOS® analogswitches comprising three independently selectable single-pole,double throw SPDT switches and four independently selectableSPDT switches, respectively.All channels exhibit break-before-make switching actionpreventing momentary shorting when switching channels. AnEN input on the ADG1233 and ADG1234 enables or disablesthe device. When disabled, all channels are switched off.The iCMOS (industrial-CMOS) modular manufacturing processcombines a high voltage complementary metal-oxide semiconductor(CMOS) and bipolar technologies. It enables thedevelopment of a wide range of high performance analog ICscapable of 33 V operation in a footprint that no other generation ofhigh voltage devices has been able to achieve.Unlike analog ICs using conventional CMOS processes, iCMOScomponents can tolerate high supply voltages while providingincreased performance, dramatically lowered power consumption,and reduced package size.The ultralow capacitance and charge injection of these multiplexersmake them ideal solutions for data acquisition and sample-andholdapplications, where low glitch and fast settling are required.Fast switching speed coupled with high signal bandwidth make thedevices suitable for video signal switching. iCMOS constructionensures ultralow power dissipation, making the devices ideallysuited for portable and battery-powered instruments.Product Highlights 1.5 pF off capacitance (±15 V supply). 0.5 pC charge injection. 3 V logic-compatible digital input, VIH = 2.0 V, VIL = 0.8 V. 16-lead TSSOP, 20-lead TSSOP, and 4 mm × 4 mm LFCSP.Applications Audio and video routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Communication systems

The ADG1311 / ADG1312 / ADG1313 are monolithic CMOSdevices containing four independently selectable switchesdesigned on a CMOS process.The ADG1311 / ADG1312 / ADG1313 contain four independentsingle-pole/single-throw (SPST) switches. The ADG1311 andADG1312 differ only in that the digital control logic is inverted.The ADG1311 switches are turned on with Logic 0 on the appropriatecontrol input, while Logic 1 is required for the ADG1312.The ADG1313 has two switches with digital control logic similarto the ADG1311; the logic is inverted on the other two switches.The ADG1313 exhibits break-before-make switching action foruse in multiplexer applications.Each switch conducts equally well in both directions when onand has an input signal range that extends to the supplies. In theoff condition, signal levels up to the supplies are blocked.APPLICATIONS Signal Switching Battery-powered Systems Communication Systems

The ADG417 is a monolithic CMOS SPST switch. This switch is designed on an enhanced LC2MOS process that provides low power dissipation yet gives high switching speed, low on resistance and low leakage currents.The on resistance profile of the ADG417 is very flat over the full analog input range ensuring excellent linearity and low distortion. The part also exhibits high switching speed and high signal bandwidth. CMOS construction ensures ultralow power dissipation making the parts ideally suited for portable and battery powered instruments.The ADG417 switch, which is turned ON with a logic low on the control input, conducts equally well in both directions when ON and has an input signal range that extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked. The ADG417 exhibits break-before-make switching action for use in multiplexer applications. Inherent in the design is low charge injection for minimum transients when switching the digital input.Applications Precision Test Equipment Precision Instrumentation Battery Powered Systems Sample Hold Systems

The ADG508F and ADG509F are CMOS analog multiplexers, with the ADG508F comprising eight single channels and the ADG509F comprising four differential channels. These multiplexer provides fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from -40 V to +55 V. During fault conditions with power supplies off, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current will flow. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources that drive the multiplexer.The ADG508F switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. The ADG509F switches one of four differential inputs to a common differential output as determined by the 2-bit binary address lines A0 and A1. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched OFF.PRODUCT HIGHLIGHTS Fault protection. The ADG508F/ADG509F can withstand continuous voltage inputs from −40 V to +55 V. When a fault occurs due to the power supplies being turned off, all the channels are turned off and only a leakage current of a few nanoamperes flows. On channel saturates while fault exists. Low RON. Fast switching times. Break-before-make switching. Switches are guaranteed break-before-make so that input signals are protected against momentary shorting. Trench isolation eliminates latch-up. A dielectric trench separates the p and n-channel MOSFETs thereby preventing latch-up.APPLICATIONS Existing multiplexer applications (both fault-protected and nonfault-protected) New designs requiring multiplexer functions

The ADG608 is a monolithic CMOS analog multiplexer comprising 8 single channels. The ADG608 switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on both devices is used to enable or disable the device. When disabled, all channels are switched OFF. The ADG608 is designed on an enhanced LC2 MOS process, which provides low power dissipation yet gives high switching speed and low on resistance. Each channel conducts equally well in both directions when ON and has an input signal range which extends to the supplies. In the OFF condition, signal levels up to the supplies are blocked. All channels exhibit break before make switching action preventing momentary shorting when switching channels. Inherent in the design is low charge injection for minimum transients when switching the digital inputs.