Dual 10-Bit, High Bandwidth Multiplying DACs with Parallel Interface Features: 10 MHz multiplying bandwidth INL of ±0.25 LSB @ 8 bits 24-lead TSSOP package 2.5 V to 5.5 V supply operation ±10 V reference input 21.3 MSPS update rate Extended temperature range: −40°C to +125°C 4-quadrant multiplication Power-on reset 0.5 μA typical current consumption Guaranteed monotonic Readback Function AD7528 Upgrade (AD5428)  AD7547 Upgrade (AD5447)

12-Bit High Bandwidth Multiplying DAC's with Serial Interface Features: 2.5 V to 5.5 V supply operation 50 MHz Serial Interface 10 MHz Multiplying Bandwidth 2.5 MSPS update rate INL of ±1 LSB for 12-bit DAC ±10 V reference input Low glitch energy < 2 nV-s Extended temperature range −40°C to +125°C 10-lead MSOP package Pin Compatible 8- (AD5426) and 10- (AD5432) Current Output DACs Guaranteed monotonic 4-quadrant multiplication Power-on reset with brownout detection Daisy-chain mode Readback function 0.4 μA typical power consumption

The LTC1520 is a high speed, precision differential line receiver that can operate at data rates as high as 50Mbps. A unique architecture provides very stable propagation delays and low skew over a wide input common mode, input overdrive and ambient temperature range. Propagation delay is 18ns ?3ns, while typically tPLH/tPHL skew is 500ps and channel-to-channel skew is 400ps.Each receiver translates differential input levels (VID ? 100mV) into valid CMOS and TTL output levels. Its high input resistance (?18k) allows many receivers to be connected to the same driver. The receiver outputs go into a high impedance state when disabled.Protection features include thermal shutdown and a controlled maximum short-circuit current (50mA max) that does not oscillate in and out of short-circuit mode. Input resistance remains ?18k when the device is unpowered or disabled, thus allowing the LTC1520 to be hot swapped into a backplane without loading the data lines.The LTC1520 operates from a single 5V supply and draws 12mA of supply current. The part is available in a 16-lead narrow SO package.Applications High Speed Backplane Interface Line Collision Detector PECL and LVDS Line Receivers Level Translator Ring Oscillator Tapped Delay Line

The HMC835LP6GE is a low noise, wide band, Fractional-N PLL that features an integrated VCO with a fundamental frequency of 2020 to 4100 MHz, and an integrated VCO Output Divider (divide by 2/4/6/.../60/62) that together enable the HMC835LP6GE to generate frequencies from 33 MHz to 4100 MHz. Integrated Phase Detector (PD) and a deltasigma modulator capable of operating at up to 100 MHz enable wider loop-bandwidths, faster frequency changes along with excellent spectral performance.Two independent RF outputs, with independent gain control, enable the HMC835LP6GE to distribute identical frequency and phase signals to multiple destinations, at optimal signal levels tailored to each output.External VCO input, allows the HMC835LP6GE to lock external VCOs, and enables cascaded LO architectures for MIMO radio applications. Two separate Charge Pump (CP) outputs enable separate loop filters optimized for both integrated and external VCOs, and seamless switching between integrated or external VCOs during operation. Programmable RF output phase feature can further phase adjust and synchronize multiple HMC835LP6GEs enabling scalable MIMO and beam-forming radio architectures.Additional features include configurable output mute function that mutes RF outputs during frequency changes, Exact Frequency Mode that enables the HMC835LP6GE to generate fractional frequencies with 0 Hz frequency error, and the ability to synchronously change frequencies without changing the phase of the output signal.Applications MIMO Radio Architectures Cellular Infrastructure Cellular backhaul Communications Test Equipment CATV Equipment Phased Array Applications? DDS Replacement

Dual, 12-Bit, 80 MSPS/125 MSPS Serial LVDS 1.8 V Analog-to-Digital Converter Features: 1.8 V supply operation Low power: 115 mW per channel at 125 MSPS with scalable power options SNR = 71 dBFS (to Nyquist) SFDR = 93 dBc at 70 MHz DNL = −0.1 LSB to +0.2 LSB (typical); INL = ±0.4 LSB (typical) Serial LVDS (ANSI-644, default) and low power, reduced range option (similar to IEEE 1596.3) 650 MHz full power analog bandwidth 2 V p-p input voltage range Serial port control Full chip and individual channel power-down modes Flexible bit orientation Built-in and custom digital test pattern generation Clock divider Programmable output clock and data alignment Programmable output resolution Standby mode

Quad 16-/14-/12-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface

Quad 14-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface Features: High relative accuracy (INL): ±2 LSB maximum at 16 bits Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility Low glitch: 0.5 nV-sec 400 kHz I2C-compatible serial interface Low power: 3.3 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

Quad 16-/14-/12-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface

Quad, Current-Output, Serial-Input 16-/14-Bit DACs Features: 16-bit resolution INL of ±1 LSB (B Grade) 2 mA full-scale current ± 20%, with VREF = ±10 V 0.9 μs settling time to ±0.1% 12 MHz multiplying bandwidth Midscale glitch of −1 nV-sec Midscale or zero-scale reset Four separate, 4-quadrant multiplying reference inputs Compact 28-lead SSOP and 32-lead LFCSP See data sheet for additional featuresAD5544-EP supports defense and aerospace applications (AQEC standard) Download AD5544-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12663 DSCC Drawing Number

High Common-Mode Voltage, Single-Supply Difference Amplifier