The ADuM3200 / ADuM3201 are dual-channel, digital isolatorsbased on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic transformertechnology, these isolation components provide outstandingperformance characteristics superior to alternatives such asoptocoupler devices.By avoiding the use of LEDs and photodiodes, iCouplerdevices remove the design difficulties commonly associatedwith optocouplers. The typical optocoupler concerns regardinguncertain current transfer ratios, nonlinear transfer functions,and temperature and lifetime effects are eliminated with thesimple iCoupler digital interfaces and stable performance characteristics.The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The ADuM3200 / ADuM3201 isolators provide two independentisolation channels in a variety of channel configurations anddata rates (see the Ordering Guide). They operate with 3.3 Vor 5 V supply voltages on either side, providing compatibilitywith lower voltage systems as well as enabling voltage translationfunctionality across the isolation barrier. The ADuM3200Wand ADuM3201W are automotive grade versions qualifiedfor 125°C operation.In comparison to the ADuM1200 / ADuM1201 isolators, theADuM3200 / ADuM3201 isolators contain various circuit andlayout changes to provide increased capability relative to system-levelIEC 61000-4-x testing (ESD, burst, and surge). The precisecapability in these tests for either the ADuM1200 / ADuM1201or ADuM3200 / ADuM3201 products is strongly determined bythe design and layout of the user’s board or module. For moreinformation, see the AN-793 Application Note, ESD/Latch-UpConsiderations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor

The ADuM3200 / ADuM3201 are dual-channel, digital isolatorsbased on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic transformertechnology, these isolation components provide outstandingperformance characteristics superior to alternatives such asoptocoupler devices.By avoiding the use of LEDs and photodiodes, iCouplerdevices remove the design difficulties commonly associatedwith optocouplers. The typical optocoupler concerns regardinguncertain current transfer ratios, nonlinear transfer functions,and temperature and lifetime effects are eliminated with thesimple iCoupler digital interfaces and stable performance characteristics.The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The ADuM3200 / ADuM3201 isolators provide two independentisolation channels in a variety of channel configurations anddata rates (see the Ordering Guide). They operate with 3.3 Vor 5 V supply voltages on either side, providing compatibilitywith lower voltage systems as well as enabling voltage translationfunctionality across the isolation barrier. The ADuM3200Wand ADuM3201W are automotive grade versions qualifiedfor 125°C operation.In comparison to the ADuM1200 / ADuM1201 isolators, theADuM3200 / ADuM3201 isolators contain various circuit andlayout changes to provide increased capability relative to system-levelIEC 61000-4-x testing (ESD, burst, and surge). The precisecapability in these tests for either the ADuM1200 / ADuM1201or ADuM3200 / ADuM3201 products is strongly determined bythe design and layout of the user’s board or module. For moreinformation, see the AN-793 Application Note, ESD/Latch-UpConsiderations with iCoupler Isolation Products.Applications Size-critical multichannel isolation SPI interface/data converter isolation RS-232/RS-422/RS-485 transceiver isolation Digital field bus isolation Hybrid electric vehicles, battery monitor

The ADuM4150 is a 6-channel, SPIsolator™ digital isolator optimized for isolated serial peripheral interfaces (SPIs). Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS SPI bus signals supports SPI clock rates of up to 17 MHz. These channels operate with 13 ns propagation delay and 1 ns jitter to optimize timing for SPI.The ADuM4150 isolator also provides two additional independent low data rate isolation channels, one channel in each direction. Data in the slow channels is sampled and serialized for a 250 kbps data rate with 2.5 μs of jitter.The ADuM4150 supports a delay clock output on the master side of the device. This output can be used with an additional clocked port on the master to support 40 MHz clock performance. See the Delay Clock section for more information.Applications Industrial programmable logic controllers (PLC) Sensor isolation

The ADuM4151/ADuM4152/ADuM4153 are 7-channel, SPIsolator™ digital isolators optimized for isolated serial peripheral interfaces (SPIs).(3.75kV rms model available) Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay in the CLK, MO/SI, MI/SO, and SS SPI bus signals supports SPI clock rates of up to 17 MHz. These channels operate with 14 ns propagation delay and 1 ns jitter to optimize timing for SPI.The ADuM4151/ADuM4152/ADuM4153 isolators also provide three additional independent low data rate isolation channels in three different channel direction combinations. Data in the slow channels is sampled and serialized for a 250 kbps data rate with up to 2.5 μs of jitter in the low speed channels.Applications Industrial programmable logic controllers (PLCs) Sensor isolation

The ADuM4154 is an SPIsolator™ digital isolator optimized for a serial peripheral interface (SPI) that includes support for up to four slave devices. Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay and jitter in the CLK, MO/SI, MI/SO, and SS SPI bus signals support SPI clock rates of up to 17 MHz.The ADuM4154 isolator also provides a slave select multiplexing system that allows up to four slave devices to be serviced from one isolator. When a target slave is selected, the slave select signal propagates to the desired output with low propagation delay, allowing tight timing control. The isolated SSx is addressed through a 250 kbps low speed, 2-channel address bus, allowing the target slave device to be changed in as little as 2.5 μs.Applications Industrial programmable logic controllers (PLCs) Sensor isolation 

The ADuM4154 is an SPIsolator™ digital isolator optimized for a serial peripheral interface (SPI) that includes support for up to four slave devices. Based on the Analog Devices, Inc., iCoupler® chip scale transformer technology, the low propagation delay and jitter in the CLK, MO/SI, MI/SO, and SS SPI bus signals support SPI clock rates of up to 17 MHz.The ADuM4154 isolator also provides a slave select multiplexing system that allows up to four slave devices to be serviced from one isolator. When a target slave is selected, the slave select signal propagates to the desired output with low propagation delay, allowing tight timing control. The isolated SSx is addressed through a 250 kbps low speed, 2-channel address bus, allowing the target slave device to be changed in as little as 2.5 μs.Applications Industrial programmable logic controllers (PLCs) Sensor isolation 

The ADuM5410/ADuM5411/ADuM5412 are quad-channel digital isolators with isoPower®, integrated, isolated dc-to-dcconverters. Based on the Analog Devices, Inc., iCoupler® technology, the dc-to-dc converters provide regulated, isolated power that is adjustable between 3.15 V and 5.25 V.The ADuM5410/ADuM5411/ADuM5412 eliminate the need for a separate, isolated dc-to-dc converter in low power, isolated designs. The iCoupler chip scale transformer technology is used for isolated logic signals and for the magnetic components of the dc-to-dc converters. The result is a small form factor, total isolation solution.The ADuM5410/ADuM5411/ADuM5412 isolators provide fourindependent isolation channels in a variety of channel configurations and data rates (see the Ordering Guide for more information).Applications RS-232 transceivers Power supply startup bias and gate drives Isolated sensor interfaces Industrial PLCs

The ADXL316 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs. The product measures acceleration with a minimum measurement range of ±16 g. It can measure the static acceleration of gravity in tilt sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.The user selects the bandwidth of the accelerometer using the CX, CY, and CZ capacitors at the XOUT, YOUT, and ZOUT pins. Bandwidths can be selected to suit the application, with a range of 0.5 Hz to 1600 Hz for the x and y axes, and a range of 0.5 Hz to 550 Hz for the z axis.The ADXL316 is available in a small, low profile, 4 mm × 4 mm × 1.45 mm, 12-lead, plastic lead frame chip scale package (LFCSP).Applications Cost sensitive, low power, motion and tilt sensing applications Mobile devices Gaming systems Disk drive protection Image stabilization Active noise control (ANC) Sports and health devices

The analog output ADXL354 and the digital output ADXL355 are low noise density, low 0 g offset drift, low power, 3-axisaccelerometers with selectable measurement ranges. TheADXL354B supports the ±2 g and ±4 g ranges, the ADXL354Csupports the ±2 g and ±8 g ranges, and the ADXL355 supports the ±2 g, ±4 g, and ±8 g ranges. The ADXL354/ADXL355 offerindustry leading noise, minimal offset drift over temperature,and long-term stability enabling precision applications with minimal calibration.Highly integrated in a compact form factor, the low powerADXL355 is ideal in an Internet of Things (IoT) sensor nodeand other wireless product designs.The ADXL355 multifunction pin names may be referenced by their relevant function only for either the serial peripheralinterface (SPI) or I2C interface.Applications Inertial measurement units (IMUs)/altitude and heading reference systems (AHRS) Platform stabilization systems Structural health monitoring Seismic imaging Tilt sensing Robotics Condition Monitoring

The analog output ADXL356 and the digital output ADXL357 are low noise density, low 0 g offset drift, low power, 3-axis accelerometers with selectable measurement ranges. The ADXL356B supports the ±10 g and ±20 g ranges, the ADXL356C supports the ±10 g and ±40 g ranges, and the ADXL357 supports the ±10 g, ±20 g, and ±40 g ranges.The ADXL356/ADXL357 offer industry leading noise, minimal offset drift over temperature, and long-term stability, enabling precision applications with minimal calibration.The low drift, low noise, and low power ADXL357 enables accurate tilt measurement in an environment with high vibration. The low noise of the ADXL356 over higherfrequencies is ideal for condition-based monitoring and other vibration sensing applications.The ADXL357 multifunction pin names may be referenced only by their relevant function for either the serial peripheral interface (SPI) or limited I2C interface.Applications Inertial measurement units (IMUs)/altitude and heading reference systems (AHRSs) Platform stabilization systems Structural health monitoring Seismic imaging Tilt sensing Robotics Condition monitoring