0 Hz/DC to 34 GHz, SPDT MEMS Switches Features: ADGM1001: DC to 34 GHz Insertion loss 0.8 dB (typical) at 18 GHz 1.5 dB (typical) at 34 GHz IIP3: 76 dBm (typical) Maximum RF power: 33 dBm On resistance: 3.4 Ω (typical) Maximum dc current: 200 mA Actuation lifetime: 100 million cycles (minimum) On switching time (tON): 200 μs (typical) Integrated 3.3 V driver for simple control with parallel and SPI Independently controllable switches Space-saving integrated passive components Small, 5.00 mm × 4.00 mm × 0.90 mm, 24-lead LGA package Temperature range: –40°C to +85°C

0 Hz/DC to 16 GHz, SPDT MEMS Switches Features: ADGM1003: DC to 16 GHz Insertion loss 0.5 dB (typical) at 6 GHz 0.7 dB (typical) at 16 GHz Maximum RF power: 27 dBm On resistance: 3.4 Ω (typical) Maximum dc current: 75 mA Actuation lifetime: 100 million cycles (Typical) On switching time (tON): 200 μs (typical) Integrated 3.3 V driver for simple control with parallel and SPI Independently controllable switches Space-saving integrated passive components Small, 5.00 mm × 4.00 mm × 0.90 mm, 24-lead LGA package Temperature range: –40°C to +85°C

0 Hz/DC to 16 GHz, SPDT MEMS Switches Features: ADGM1003: DC to 16 GHz Insertion loss 0.5 dB (typical) at 6 GHz 0.7 dB (typical) at 16 GHz Maximum RF power: 27 dBm On resistance: 3.4 Ω (typical) Maximum dc current: 75 mA Actuation lifetime: 100 million cycles (Typical) On switching time (tON): 200 μs (typical) Integrated 3.3 V driver for simple control with parallel and SPI Independently controllable switches Space-saving integrated passive components Small, 5.00 mm × 4.00 mm × 0.90 mm, 24-lead LGA package Temperature range: –40°C to +85°C

Robust, Industrial, Low Power 10BASE-T1L Ethernet PHY Features: 10BASE-T1L IEEE Standard 802.3cg-2019 compliant Supports 1.0 V p-p and 2.4 V p-p transmit levels Supports intrinsic safety applications Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p Low power consumption Single supply 1 V p-p: 45 mW typical Dual supply 1 V pk-pk: 39 mW typical Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Link and cable diagnostics MII, RMII and RGMII MAC interfaces MDIO Management Interface Single or dual supply with 1.8 V or 3.3 V operation Unmanaged configuration using pin strapping including 25 MHz crystal or external clock input (50 MHz for RMII) 3.3 V, 2.5 V, or1.8 V MAC interface VDDIO supply Integrated power supply monitoring and POR EMC test standards IEC 61000-4-4 EFT (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-5 surge (±4 kV) IEC 61000-4-6 conducted immunity (10 V/m) IEC 61000-4-3 radiated immunity (Class A) EN 55032 radiated emissions (Class B) Small package 40-lead (6 mm x 6 mm) LFCSP Temperature range Industrial: -40°C to +85°C Extended:-40°C to +105°C

Robust, Industrial, Low Latency and Low Power 10 Mbps, 100 Mbps, and 1 Gbps Ethernet PHY Features: 10BASE-Te/100BASE-TX/1000BASE-T IEEE® 802.3™ compliant MII, RMII, and RGMII MAC interfaces 1000BASE-T RGMII latency transmit < 68 ns, receive < 226 ns 100BASE-TX MII latency transmit< 52 ns, receive < 248 ns EMC test standards IEC 61000-4-5 surge (±4 kV) IEC 61000-4-4 electrical fast transient (EFT) (±4 kV) IEC 61000-4-2 ESD (±6 kV contact discharge) IEC 61000-4-6 conducted immunity (10 V) EN55032 radiated emissions (Class A) EN55032 conducted emissions (Class A) Unmanaged configuration using multilevel pin strapping EEE in accordance with IEEE 802.3az Start of packet detection for IEEE 1588 time stamp support Enhanced link detection Configurable LED Crystal oscillator frequency/25 MHz clock input frequency (50 MHz for RMII) 25 MHz/125 MHz synchronous clock output Small package and wide temperature range 40-lead, 6 mm × 6 mm LFCSP Specified for −40°C to +105°C ambient operation Low power consumption 330 mW for 1000BASE-T 140 mW for 100BASE-TX 3.3 V/2.5 V/1.8 V MAC interface VDDIO supply Integrated power supply monitoring and POR

Low Complexity, 2-Port Ethernet Switch with Integrated 10BASE-T1L PHYs Features: 10BASE-T1L IEEE® Std 802.3cg-2019™ compliant Supports 1.0 V p-p & 2.4 V p-p transmit Levels Cable reach Up to 1700 meters with 1.0 V p-p transmit level Up to 1700 meters with 2.4 V p-p transmit level Low power consumption Low power consumption - single supply 80 mW typ Dual supply 1.0 V p-p: 77 mW typical Integrated switch with SPI interface 10 Mbps full duplex 16 MAC addresses supported for frame forwarding Supports OPEN Alliance 10BASE-T1x MACPHY SPI MDIO memory map accessible via SPI Supports high & low priority queues Total buffer memory of 28 kB shared between ports and host Autonegotiation capability Managed or unmanaged configuration Cut through or store and forward operation IEEE 1588 time stamp capture on transmit and receive Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Port dedicated statistics counters Link and cable diagnostics 25 MHz crystal or external clock input Single or dual supply with 1.8 V or 3.3 V operation Integrated power supply monitoring and POR Small package: 48-lead, 7 mm × 7 mm LFCSP Temperature range Industrial: 40°C to +85°C Extended: 40°C to +105°C

Precision MEMS IMU Module Features: Triaxial, digital gyroscope  ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2°/hr in-run bias stability (ADIS16465-1)  0.15°/√hr angular random walk (ADIS16465-1 and ADIS16465-2)  ±0.05° axis to axis misalignment error  Triaxial, digital accelerometer, ±8 g 3.6 μg in-run bias stability Triaxial, delta angle, and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C   SPI-compatible data communications Programmable operation and control  Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, pulse, scaled, and output On demand self test of inertial sensors On demand self test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 2000 g mechanical shock survivability Operating temperature range: −40°C to +105°C

Precision, Miniature MEMS IMU Features: Triaxial, digital gyroscope ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2.3°/hr in-run bias stability (ADIS16507-1) 0.13°/√hr angular random walk, x-axis and y-axis, 1 σ (ADIS16507-1) ±0.25° axis to axis misalignment error Triaxial, digital accelerometer, ±392 m/sec2 dynamic range 125 μm/sec2 in-run bias stability, x-axis and y-axis, 1 σ Triaxial, delta angle and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C SPI compatible data communications Programmable operation and control Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, scaled, and output On demand self-test of inertial sensors On demand self-test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 19,600 m/sec2 mechanical shock survivability Operating temperature range: −40°C to +105°C

1 MHz to 1.2 GHz VGA with 30 dB Gain Control Range Features: Voltage-controlled amplifier/attenuator Operating frequency: 1 MHz to 1.2 GHz Optimized for controlling output power High linearity: OIP3 47 dBm @ 100 MHz Output noise floor: −149 dBm/Hz @ maximum gain Input impedance: 50 Ω Output impedance: 20 Ω Wide gain-control range: 30 dB Linear-in-dB gain control function: 40 mV/dB Single-supply voltage: 4.75 V to 5.25 V

400 MHz TO 4000 MHz Low Noise Amplifier Features: Operation from 400 MHz to 4000 MHz Noise figure of 0.8 dB at 900 MHz Requires few external components Integrated active bias control circuit Integrated dc blocking capacitors Adjustable bias for low power applications Single-supply operation from 3 V to 5 V Gain of 20.8 dB at 900 MHz OIP3 of 37.0 dBm at 900 MHz P1dB of 21.8 dBm at 900 MHz Small footprint LFCSP Pin-compatible version with 21.5 dB gain available