The AD9764 is the 14-bit resolution member of the TxDAC®series of high performance, low power CMOS digital-to-analogconverters (DACs). The TxDAC®; family, which consists of pincompatible 8-, 10-, 12-, and 14-bit DACs, is specificallyoptimized for the transmit signal path of communicationsystems. All of the devices share the same interface options,small outline package and pinout, providing an upward ordownward component selection path based on performance,resolution and cost. The AD9764 offers exceptional ac and dcperformance while supporting update rates up to 125 MSPS.The AD9764’s flexible single-supply operating range of 2.7 V to5.5 V and low power dissipation are well suited for portable andlow power applications. Its power dissipation can be furtherreduced to a mere 45 mW with a slight degradation in performanceby lowering the full-scale current output. Also, a power-downmode reduces the standby power dissipation to approximately25 mW.The AD9764 is manufactured on an advanced CMOS process.A segmented current source architecture is combined with aproprietary switching technique to reduce spurious componentsand enhance dynamic performance. Edge-triggered inputlatches and a 1.2 V temperature compensated bandgap referencehave been integrated to provide a complete monolithicDAC solution. Flexible supply options support +3 V and +5 VCMOS logic families.The AD9764 is a current-output DAC with a nominal full-scaleoutput current of 20 mA and >100 kΩ output impedance.Differential current outputs are provided to support single-endedor differential applications. Matching between the twocurrent outputs ensures enhanced dynamic performance in adifferential output configuration. The current outputs may betied directly to an output resistor to provide two complementary,single-ended voltage outputs or fed directly into a transformer.The output voltage compliance range is 1.25 V.The on-chip reference and control amplifier are configured formaximum accuracy and flexibility. The AD9764 can be drivenby the on-chip reference or by a variety of external referencevoltages. The internal control amplifier, which provides a wide(>10:1) adjustment span, allows the AD9764 full-scale currentto be adjusted over a 2 mA to 20 mA range while maintainingexcellent dynamic performance. Thus, the AD9764 may operateat reduced power levels or be adjusted over a 20 dB range toprovide additional gain ranging capabilities.The AD9764 is available in a 28-lead SOIC package. It isspecified for operation over the industrial temperature range.Product Highlights The AD9764 is a member of the TxDAC product family that provides an upward or downward component selection path based on resolution (8 to 14 bits), performance and cost. Manufactured on a CMOS process, the AD9764 uses a proprietary switching technique that enhances dynamic performance beyond that previously attainable by higher power/cost bipolar or BiCMOS devices. On-chip, edge-triggered input CMOS latches readily interface to +3 V and +5 V CMOS logic families. The AD9764 can support update rates up to 125 MSPS. A flexible single-supply operating range of 2.7 V to 5.5 V, and a wide full-scale current adjustment span of 2 mA to 20 mA, allows the AD9764 to operate at reduced power levels. The current output(s) of the AD9764 can be easily configured for various single-ended or differential circuit topologies.Applications Communication Transmit Channel: - Basestations - ADSL/HFC Modems Instrumentation

The AD977 / AD977A is a high speed, low power 16-bit A/D converter that operates from a single 5 V supply. The AD977A has a throughput rate of 200 kSPS whereas the AD977 has a throughput rate of 100 kSPS. Each part contains a successive approximation, switched capacitor ADC, an internal 2.5 V reference, and a high speed serial interface. The ADC is factory calibrated to minimize all linearity errors. The AD977 / AD977A is specified for full scale bipolar input ranges of ±10 V, ±5 V and ±3.3 V, and unipolar ranges of 0 V to 10 V, 0 V to 5 V and 0 V to 4 V.The AD977 / AD977A is comprehensively tested for ac parameters such as SNR and THD, as well as the more traditional dc parameters of offset, gain and linearity.PRODUCT HIGHLIGHTS Fast Throughput The AD977 / AD977A is a high speed, 16-bit ADC based on a factory calibrated switched capacitor architecture. Single-Supply Operation The AD977 / AD977A operates from a single 5 V supply and dissipates only 100 mW max. Comprehensive DC and AC Specifications In addition to the traditional specifications of offset, gain and linearity, the AD977 / AD977A is fully tested for SNR and THD.

The AD977 / AD977A is a high speed, low power 16-bit A/D converter that operates from a single 5 V supply. The AD977A has a throughput rate of 200 kSPS whereas the AD977 has a throughput rate of 100 kSPS. Each part contains a successive approximation, switched capacitor ADC, an internal 2.5 V reference, and a high speed serial interface. The ADC is factory calibrated to minimize all linearity errors. The AD977 / AD977A is specified for full scale bipolar input ranges of ±10 V, ±5 V and ±3.3 V, and unipolar ranges of 0 V to 10 V, 0 V to 5 V and 0 V to 4 V.

The AD977 / AD977A is a high speed, low power 16-bit A/D converter that operates from a single 5 V supply. The AD977A has a throughput rate of 200 kSPS whereas the AD977 has a throughput rate of 100 kSPS. Each part contains a successive approximation, switched capacitor ADC, an internal 2.5 V reference, and a high speed serial interface. The ADC is factory calibrated to minimize all linearity errors. The AD977 / AD977A is specified for full scale bipolar input ranges of ±10 V, ±5 V and ±3.3 V, and unipolar ranges of 0 V to 10 V, 0 V to 5 V and 0 V to 4 V.

The AD9856 integrates a high-speed direct-digital synthesizer (DDS), a high-performance, high-speed 12-bit Digital-to-Analog converter (DAC), clock multiplier circuitry, digital filters, and other DSP functions onto a single chip, to form a complete quadrature digital upconverter device. The AD9856 is primarily intended to function as a universal upstream and downstream I/Q modulator for interactive HFC cable network applications, where cost, size, power dissipation, and dynamic performance are critical attributes.

The AD9949 is a highly integrated CCD signal processor for digital still camera applications. Specified at pixel rates of up to 36 MHz, the AD9949 consists of a complete analog front end with A/D conversion, combined with a programmable timing driver. The Precision Timing core allows adjustment of high speed clocks with <600 ps resolution.The analog front end includes black level clamping, CDS, PxGA, VGA, and a 36 MSPS 12-bit A/D converter. The timing driver provides the high speed CCD clock drivers for RG and H1–H4. Operation is programmed using a 3-wire serial interface.Packaged in a space-saving 40-lead LFCSP package, the AD9949 is specified over an operating temperature range of –2ºC to +8ºC.APPLICATIONS Digital still cameras High speed digital imaging applications

The AD9951 is a direct digital synthesizer (DDS) featuring a14-bit DAC operating up to 400 MSPS. The AD9951 usesadvanced DDS technology, coupled with an internal high speed,high performance DAC to form a digitally programmable,complete high frequency synthesizer capable of generating afrequency-agile analog output sinusoidal waveform at up to200 MHz. The AD9951 is designed to provide fast frequencyhopping and fine tuning resolution (32-bit frequency tuningword). The frequency tuning and control words are loaded intothe AD9951 via a serial I/O port.The AD9951 is specified to operate over the extended industrialtemperature range of −40°C to +105°C.Applications Agile local oscillator (LO) frequency synthesis Programmable clock generators Test and measurement equipment Acousto-optic device drivers

The ADA4412-3 is a comprehensive filtering solution designed to give designers the flexibility to easily filter and drive various video signals, including high definition video. Cutoff frequencies of the 6th order video filters range from 9 MHz to 36 MHz. The filters are tuned for RGB, high definition, and standard definition video signals.The ADA4412-3 includes an output offset voltage adjustment feature. Output voltage offset is continuously adjustable over an input-referred range of ±500 mV by applying a differential voltage to an independent offset control input.The ADA4412-3 can operate on a single +5 V supply as well as ±5 V supplies. Single-supply operation is ideal in applications where power consumption is critical. The disable feature allows for further power conservation by greatly reducing the supply current when a particular device is not in use.The ADA4412-3 is available in the 20-lead QSOP package and is rated for operation over the industrial temperature range of -40°C to +85°C.APPLICATIONS Set-top boxes DVD players and recorders Personal video recorders HDTVs Projectors

The OP467 is a quad, high speed, precision operational amplifier. It offers the performance of a high speed op amp combined with the advantages of a precision op amp in a single package. The OP467 is an ideal choice for applications where, traditionally, more than one op amp was used to achieve this level of speed and precision.The internal compensation of the OP467 ensures stable unity-gain operation, and it can drive large capacitive loads without oscillation. With a gain bandwidth product of 28 MHz typ driving a 30 pF load, output slew rate is 170 V/μs, and settling time to 0.01% in less than 200 ns, the OP467 provides excellent dynamic accuracy in high speed data acquisition systems. The channel-to-channel separation is typically 60 dB at 10 MHz. The low offset and drift plus high speed and low noise make the OP467 usable in applications such as high speed detectors and instrumentation.

The OP27 precision operational amplifier combines the low offset and drift of the OP07 with both high speed and low noise. Offsets down to 25µV and drift of 0.6µV/°C maximum make the OP27 ideal for precision instrumentation applications. Exceptionally low noise, a low 1/f noise corner frequency, and high gain (1.8 million), allow accurate high-gain amplification of low-level signals. A gain-bandwidth product of 8MHz and a 2.8V/µsec slew rate provides excellent dynamic accuracy in high-speed data-acquisition systems. A low input bias current of ±10nA typical is achieved by use of a bias-current-cancellation circuit. The output stage has good load driving capability. A guaranteed swing of ±10V into 600 Ohms and low output distortion make the OP27 an excellent choice for audio applications. PSRR and CMRR exceed 120dB. These characteristics, coupled with long-term drift of 0.2µV/month, allow the circuit designer to achieve performance levels previously attained only by discrete designs.