Micropower 3-Sensor Combination Including Acceleration and Temperature Features: All sensors sampled synchronously Up to 400 Hz ODR Samples can be synchronized to external trigger Ultralow power 1.95 A at 100 Hz ODR, 2.0 V supply, all sensors on 270 nA at 6 Hz motion activated wake-up mode 10 nA standby current 12-bit resolution for all sensors Acceleration scale factor down to 1 mg/LSB Temperature scale factor: 0.065C/LSB (typical) Built-in features for motion-based system level power savings Adjustable threshold sleep/wake modes for motion activation Accelerometer, temperature sensor, and provision for third analog sensor input Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely Deep embedded FIFO minimizes host processor load Awake state output enables implementation of standalone, motion activated switch Wide supply and I/O voltage ranges: 1.6 V to 3.5 VOperates off 1.8 V to 3.3 V railsPower can be derived from coin cell batterySPI digital interfaceSmall and thin 3 mm 3.25 mm 1.06 mm package

12-Bit High Speed Multiplying D/A Converter Features: Differential Nonlinearity: ±1/2 LSB Nonlinearity: 0.05% Fast Settling Time: 250 ns High Compliance: -5 V to +10 V Differential Outputs: 0 to 4 mA Guaranteed Monotonicity: 12 bits Low Full-Scale Tempco: 10 ppm/°C Circuit Interface to TTL, CMOS, ECL, PMOS/NMOS Low Power Consumption: 225 mW Industry Standard AM6012 Pinout Available in Die Form

High Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receiver Features: 120 kB transmission rate Small (0.1 µF) charge pump capacitors Single 5 V power supply Meets TIA/EIA-232-E and V.28 specifications 2 drivers and 2 receivers On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power BiCMOS: 2.5 mA ICC ±30 V receiver input levels

Equalisers Front Panel HDMI Buffer - TMDS Only

Operational Amplifiers - Op Amps VLTG-FDBK, G= 2 CLAMP AMP

Charge Pump, 7-Channel Smart LED Driver with I2C Interface Features: Charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency 7 independent, programmable LED drivers 7 drivers capable of 30 mA (typical) 1 driver also capable of 60 mA (typical) Programmable maximum current limit (128 levels) Standby mode for <1 μA current consumption 16 programmable fade in and fade out time 0.1 sec to 5.5 sec Choose from linear, square, or cubic rates Fading override I2C-compatible interface for all programming Dedicated reset pin and built-in power-on reset (POR) Short-circuit, overvoltage, and overtemperature protection Internal soft start to limit inrush currents Input-to-output isolation during faults or shutdown Operation down to VIN = 2.5 V with undervoltage lockout (UVLO) at VIN = 2.0 V Available in a small 20-ball, 2.15 mm × 2.36 mm × 0.6 mm WLCSP or a 20-lead, 4 mm × 4 mm × 0.75 mm LFCSP

anyCAP 100 mA Low Dropout Linear Regulator Features:1.2% accuracy over line and load regulations @ 25C Ultralow dropout voltage: 120 mV typical @ 100 mA Requires only COUT = 0.47 F for stability anyCAP LDOs are stable with all types of capacitors (including MLCC) Current and thermal limiting Low noise Low shutdown current: 1 A 2.8 V to 12 V supply range 20C to +85C ambient temperature range Several fixed voltage options Ultrasmall 5-lead SOT-23 package Excellent line and load regulations

High Accuracy Ultralow IQ, 300 mA, anyCAP Low Dropout Regulator Features:High Accuracy over line and load: 0.8% @ 25C, 1.8% over temperatureUltralow dropout voltage: 230 mV (Max) @ 300 mARequires only COUT = 1.0 F for stabilityanyCAP is stable with any type of capacitor (including MLCC)Current and thermal limitingLow noiseLow shutdown current: 2.6 V to 12 V supply range40C to +85C ambient temperature rangeUltrasmall 8-Lead MSOP package

High Accuracy Ultralow IQ, 300 mA, anyCAP Low Dropout Regulator Features:High Accuracy over line and load: 0.8% @ 25C, 1.8% over temperatureUltralow dropout voltage: 230 mV (Max) @ 300 mARequires only COUT = 1.0 F for stabilityanyCAP is stable with any type of capacitor (including MLCC)Current and thermal limitingLow noiseLow shutdown current: 2.6 V to 12 V supply range40C to +85C ambient temperature rangeUltrasmall 8-Lead MSOP package

2 A/1.2 A DC-to-DC Switching Regulator with Independent Positive and Negative Outputs Features: Wide input supply voltage range: 2.85 V to 15 V Generates well regulated, independently resistor programmable VPOS and VNEG outputs Boost regulator to generate VPOS output Adjustable positive output to 39 V Integrated 2.0 A main switch Optional single-ended primary-inductor converter (SEPIC) configuration for automatic step-up/step-down Inverting regulator to generate VNEG output Adjustable negative output to VIN − 39 V Integrated 1.2 A main switch True shutdown for both positive and negative outputs 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Individual precision enable and flexible start-up sequence control for symmetric start, VPOS first, or VNEG first Out-of-phase operation UVLO, OCP, OVP, and TSD protection 4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set