18-Bit, 2 MSPS/1 MSPS/500 kSPS, Precision, Pseudo Differential, SAR ADCs Features: Easy Drive Greatly reduced input kickback Input current reduced to 0.5 μA/MSPS Enhanced acquisition phase, ≥79% of cycle time at 1 MSPS First conversion accurate, no latency or pipeline delay Input span compression for single-supply operation Fast conversion allows low SPI clock rates Input overvoltage clamp protection sinks up to 50 mA SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface High performance Pseudo differential analog input range 0 V to VREF with VREF from 2.4 V to 5.1 V Throughput: 2 MSPS/1 MSPS/500 kSPS options INL: ±3.2 LSB maximum Guaranteed 18-bit, no missing codes SNR: 95 dB at fIN = 1 kHz at VREF = 5 V THD: −125 dB at fIN = 1 kHz, −108 dB at fIN = 100 kHz SINAD: 84.5 dB at fIN = 1 MHz (see Figure 17 in data sheet) Oversampled dynamic range 98 dB for OSR = 2 125 dB for OSR = 1024 Low power Single 1.8 V supply operation with 1.71 V to 5.5 V logic interface 2.5 mW at 500 kSPS (VDD only) 70 μW at 10 kSPS, 14 mW at 2 MSPS (total power) 10-lead packages: 3 mm × 3 mm LFCSP, 3 mm × 4.90 mm MSOP Pin compatible with AD4003/AD4007/AD4011 family Guaranteed operation: −40°C to +125°C

Single Supply, 24-Bit, Sigma-Delta ADC with 10 V and 0 mA to 20 mA Inputs Features: Internal or external clock Tested for robustness per: IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, CISPR 11 24-bit ADC with integrated analog front end Fast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 μs settling) 16 noise free bits at 1 kSPS per channel 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel ±10 V inputs, 4 differential or 8 single-ended Pin absolute maximum rating ±50 V Absolute input pin voltage up to ±20 V ≥1 MΩ impedance ±0.06% accuracy at 25°C 0 mA to 20 mA inputs, 4 single-ended Pin absolute maximum rating ±50 mA Input range from −0.5 mA to +24 mA 60 Ω impedance ±0.08% accuracy at 25°C On-chip 2.5 V reference ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift Power supplies AVDD = 3.0 V to 5.5 V IOVDD = 2 V to 5.5 V Total IDD = 3.9 mA Temperature range: −40°C to +105°C 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK) SPI, QSPI, MICROWIRE, and DSP compatible

16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Features: Easy Drive Reduced analog input and reference drive requirements On-chip reference buffer (WLCSP only) Overvoltage protection up to 5 mA on each analog input Long acquisition phase, ≥71.5% (715 ns/1000 ns) of cycle time at 1 MSPS High performance Sample rate: 500 kSPS (AD4695) or 1 MSPS (AD4696) INL: ±1.0 LSB maximum Guaranteed 16-bit, no missing codes SINAD: 93 dB typical, fIN = 1 kHz Oversampled dynamic range: 111.2 dB, OSR = 64 Small footprint, high channel density 32-lead 5 mm × 5 mm LFCSP 36-ball 2.96 mm × 2.96 mm WLCSP Easy Drive features support system level designs with fewer components Enhanced digital functionality First conversion accurate, no latency or pipeline delay Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates Customizable channel sequencer On-chip oversampling and decimation Threshold detection alerts Offset and gain correction Autonomous conversion (autocycle) mode 1.14 V to 1.98 V logic SPI Low power 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS 4 μW standby power dissipation with the internal LDO disabled Internal LDO enables 3.15 V to 5.5 V, single analog supply operation Wide operating temperature range: −40°C to +125°C

Dual Low Power, High Speed JFET Operational Amplifier Features: Low supply current: 250 μA/amp maximum High slew rate: 9 V/μs Bandwidth: 3.5 MHz typical Low offset voltage: 1 mV maximum @ 25°C Low input bias current: 20 pA maximum @ 25°C CMRR: 90 dB typical Fast settling time Unity gain stable

Low Input Bias Current, Wide BW JFET Precision Dual Op Amp Features: Low Noise 6 nV/√Hz Low Offset Voltage: 100 µV Max Low Input Bias Current 10 pA Max Fast Settling: 600 ns to 0.01% Low Distortion Unity Gain Stable No Phase Reversal Dual-Supply Operation: ±5 V to ±13 V

Dual Output Low Noise Amplifier, 0.04 - 0.96 GHz Features: Single-ended or Balanced Output High Output IP3: +27 dBm Low Noise Figure: 3.5 dB Single Positive Supply: +5V 75 Ohm Input

I/Q Receiver SMT, 17 - 21 GHz Features: Conversion Gain: 10 dB Image Rejection: 18 dB 2 LO to RF Isolation: 65 dB Noise Figure: 3 dB Input IP3: 2 dB RoHS Compliant 5x5 mm SMT Package

I/Q Receiver SMT, 21 - 25 GHz Features: Conversion Gain: 9 dB Image Rejection: 18 dB 2 LO to RF Isolation: 35 dB Noise Figure: 3.5 dB Input IP3: 2 dBm RoHS Compliant 5x5 mm SMT Package

HBT Vector Modulator SMT, 700 - 1000 MHz Features: Continuous Phase Control: 360° Continuous Gain Control: 40 dB Low Output Noise Floor: -162 dBm/Hz High Input IP3: +34 dBm 16 Lead 3×3mm SMT Package: 9mm2

LNA with Failsafe Bypass Mode SMT, 1700 - 2200 MHz Features: Noise Figure: 1.4 dB Output IP3: +29 dBm Gain: 17 dB Failsafe Operation: Bypass is enabled when LNA is unpowered Single Supply: +3V or +5V 16 Lead 3x3mm SMT Package: 9mm²