16-Channel, 16-Bit Voltage Output denseDAC Features: Download AD5766-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. Complete 16-channel, 16-bit DACs 8 software-programmable output ranges: −20 V to 0 V, −16 V to 0 V, −10 V to 0 V, −10 V to +6 V, −12 V to +14 V, −16 V to +10 V, ±5 V and ±10 V Integrated DAC output buffers with ±20 mA output current capability 4 mm × 4 mm WLCSP package and 40-lead LFCSP package Integrated reference buffers 2 dither signal input pins Channel monitoring multiplexer 1.8 V logic compatibility Temperature range: −40°C to +105°C

High Precision, Impedance & Electrochemical Front End Features: Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual output voltage DAC with an output range of 0.2 V to 2.4 V 12-bit VBIAS0 output to bias potentiostat 6-bit VZERO0 output to bias TIA Ultra low power: 1 µA 1 high speed, 12-bit DAC Output range to sensor: ±607 mV Programmable gain amplifier on output with gain settings of 2 and 0.05 Amplifiers, accelerators, and references 1 low power, low noise potentiostat amplifier suitable for potentiostat bias in electrochemical sensing 1 low noise, low power TIA, suitable for measuring sensor current output 50 pA to 3 mA range Programmable load and gain resistors for sensor output Analog hardware accelerators Digital waveform generator Receive filters Complex impedance measurement (DFT) engine 1 high speed TIA to handle wide bandwidth input signals from 0.015 Hz up to 200 kHz Digital waveform generator for generation of sinusoid and trapezoid waveforms 2.5 V and 1.82 V internal reference voltage sources System level power savings Fast power-up and power-down analog blocks for duty cycling Programmable AFE sequencer to minimize workload of host controller 6 kB SRAM to preprogram AFE sequences Ultra low power potentiostat channel: 6.5 µAof current consumption when powered on and all other blocks in hibernate mode Smart sensor synchronization and data collection Cycle accurate control of sensor measurement Sequencer controlled GPIOs On-chip peripherals SPI serial input/output Wake-up timer Interrupt controller Power 2.8 V to 3.6 V supply 1.82 V input/output compliant Power-on reset Hibernate mode with low power DAC and potentiostat amplifier powered up to maintain sensor bias Package and temperature range 3.6 mm × 4.2 mm, 56-ball WLCSP 7 mm × 7 mm, 48-lead LFCSP Fully specified for operating temperature range of −40°C to +85°C AD5940 and AD5941 fully specified for operating temperature range of −40°C to +85°C AD5941W fully specified for operating temperature range of −40°C to +105°C AEC-Q100 qualified for automotive applications

2 GHz Ultralow Distortion Differential RF/IF Amplifier Features: −3 dB bandwidth of 2.2 GHz (AV = +10 dB) Single resistor gain adjust: 3 dB ≤ AV ≤ 25 dB Single resistor and capacitor distortion adjust Input resistance: 3 kΩ, independent of gain (AV) Differential or single-ended input to differential output Low noise input stage: 2.7 nV/√Hz RTI at AV = 10 dB Low broadband distortion 10 MHz: −86 dBc HD2, −82 dBc HD3 70 MHz: −84 dBc HD2, −82 dBc HD3 190 MHz: −81 dBc HD2, −87 dBc HD3 OIP3 of 41 dBm at 150 MHz Slew rate: 8 V/ns Fast settling and overdrive recovery of <2 ns Single-supply operation: 3 V to 5.5 V Low power dissipation: 37 mA typical at 5 V Power-down capability: 5 mA at 5 V Fabricated using the high speed XFCB3 SiGe process

Bidirectional, Zero Drift, Current Sense Amplifier Features: Typical 0.1 µV/°C offset drift Maximum ±400 µV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V continuous −3 V to +80 V survival Initial gain = 60 V/V Wide operating temperature range AD8417WB: −40°C to +125°C AD8417WH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC and 8-lead MSOP Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz Qualified for automotive applications

Bidirectional, Zero Drift, Current Sense Amplifier Features: Typical 0.1 µV/°C offset drift Maximum ±400 µV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V continuous −3 V to +80 V survival Initial gain = 60 V/V Wide operating temperature range AD8417WB: −40°C to +125°C AD8417WH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC and 8-lead MSOP Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz Qualified for automotive applications

Bidirectional, Zero Drift, Current Sense Amplifier Features: Typical 0.1 µV/°C offset drift Maximum ±400 µV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V continuous −3 V to +80 V survival Initial gain = 60 V/V Wide operating temperature range AD8417WB: −40°C to +125°C AD8417WH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC and 8-lead MSOP Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz Qualified for automotive applications

3 nV /Hz, Low Power Instrumentation Amplifier Features: Low power 2.3 mA maximum supply current Low noise 3.2 nV/√Hz maximum input voltage noise at 1 kHz 200 fA/√Hz current noise at 1 kHz Excellent ac specifications  10 MHz bandwidth (G = 1) 2 MHz bandwidth (G = 100) 0.6 µs settling time to 0.001% (G = 10) 80 dB CMRR to 20 kHz (G = 1) 35 V/µs slew rate High precision dc performance (AD8421BRZ) 94 dB CMRR minimum (G = 1) 0.2 μV/C maximum input offset voltage drift 1 ppm/C maximum gain drift (G = 1)500 pA maximum input bias current Inputs protected to 40 V from opposite supply ±2.5 V to 18 V dual supply (5 V to 36 V single supply) Gain set with a single resistor (G = 1 to 10,000) Available in 8-lead LFCSP, 8-lead MSOP, and 8-lead SOIC Download AD8421-KGD Data Sheet Available As Known Good Die and fully guaranteed to data sheet specificationsAD8421-EP supports defense and aerospace applications (AQEC standard) Download AD8421-EP data sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/13625 DSCC Drawing Number

High Performance, Low Power, Rail-to-Rail Precision Instrumentation Amplifier Features: Low power: 330 μA maximum quiescent current Rail-to-rail output Low noise and distortion 8 nV/√Hz maximum input voltage noise at 1 kHz 0.15 μV p-p RTI noise (G = 100) 0.5 ppm nonlinearity with 2 kΩ load (G = 1) Excellent ac specifications 80 dB minimum CMRR at 10 kHz (G = 1) 2.2 MHz bandwidth (G = 1) High precision dc performance (AD8422BRZ) 150 dB minimum CMRR (G = 1000) 0.04% maximum gain error (G = 1000) 0.3 μV/°C maximum input offset drift 0.5 nA maximum input bias current Wide supply range 4.6 V to 36 V single supply ±2.3 V to ±18 V dual supply Input overvoltage protection: 40 V from opposite supply Gain range: 1 to 1000 Available in 8-lead LFCSP, 8-lead MSOP, and 8-lead SOIC_N

60 MHz, 2000 V/s, Monolithic Op Amp with Quad Low Noise Features: Wide bandwidth 60 MHz at gain of −1  33 MHz at gain of −10  Slew rate: 2000 V/μs  20 MHz full power bandwidth, 20 V p-p, RL = 500 Ω  Fast settling: 100 ns to 0.1% (10 V step) Differential gain error: 0.03% at 4.4 MHz  Differential phase error: 0.16° at 4.4 MHz  Low offset voltage: 150 μV maximum (B Grade) Low quiescent current: 6.5 mA  Available in tape and reel in accordance with EIA-481-A standard

High Speed, Low Power Monolithic Op Amp Features:Superior PerformanceHigh Unity Gain BW: 50 MHzLow Supply Current: 5.3 mAHigh Slew Rate: 300 V/sExcellent Video SpecificationsDrives Any Capacitive LoadFast Settling Time to 0.1% (10 V Step): 65 nsExcellent DC PerformanceHigh Open-Loop Gain 5.5 V/mV (PLOAD = 1 k)Low Input Offset Voltage: 0.5 mVSpecified for 5 V and 15 V OperationAvailable in a Wide Variety of OptionsPlastic DIP and SOIC PackagesCerdip PackageDie FormMIL-STD-883B ProcessingTape & Reel (EIA-481A Standard)Dual Version Available: AD827 (8 lead)Enhanced Replacement for LM6361