Digital to Analog Converters - DAC Single 3V 12bit SPI DAC with reference

DIGITAL ISOLATOR 35NS SSOP-20; No. of Channels:2 Channel; Propagation Delay:35ns; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Interface Case Style:SSOP; No. of Pins:20Pins; Operating Temperature Min:-40°C; Operating Temperature Max:105°C; Packaging:Each; Product Range:ADUM5211 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); No. of Channels:2Channels

6.5 V, 2 A, Ultralow Noise, High PSRR, Fast Transient Response CMOS LDO Features: Download ADM7172-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. Input voltage range: 2.3 V to 6.5 V Maximum load current: 2 A Low noise: 5 µV rms independent of output voltage at 100 Hz to 100 kHz Fast transient response: 1.5 μs for 1 mA to 1.5 A load step 60 dB PSRR at 100 kHz Low dropout voltage: 172 mV at 2 A load, VOUT = 3 V Initial accuracy: −0.5% (minimum), +1% (maximum) Accuracy over line, load, and temperature: ±1.5% Quiescent current, IGND = 0.7 mA with no load Low shutdown current: 0.25 μA at VIN = 5 V Stable with small 4.7 µF ceramic output capacitor Adjustable and fixed output voltage options: 1.2 V to 5.0 V Adjustable output from 1.2 V to VIN − VDO Precision enable Adjustable soft start 8-lead 3 mm × 3 mm LFCSP package Supported by ADIsimPower™ tool

Current Source Regulator 10mA 8-SOIC

Linear Voltage Regulators 150mA Low IQ Low Dropout Reg 2.8v

Hot Swap Controller 1 Channel General Purpose 16-SSOP

Power Management IC Development Tools LT4276C/LT4321 Demo Board PoE (13W, 5V/2.3A) PD with Flyback DC/DC and Ideal Diode Bridge

100MHz to 70GHz Linear-in-dB RMS Power Detector with 35dB Dynamic Range Features: Ultra Wide Matched Input Frequency Range: 100MHz to 70GHz 35dB Linear Dynamic Range (< ±1dB Error) 28.5mV/dB Logarithmic Slope ±2dB Flat Response from 100MHz to 60GHz Accurate RMS Power Measurement of High Crest Factors (Up to 12dB) Modulated Waveforms Low Power Shutdown Mode Low Supply Current: 33mA at 3.3V (Typical) Small 2mm × 2mm Plastic DFN8 Package I-Grade: −40°C to 105°C Rated H-Grade: −40°C to 125°C Rated with Guaranteed Log-Slope and Log-Intercept ESD Rating: 2500V HBM, 1500V CDM

Data Conversion IC Development Tools LTC2635-HZ12: 12-Bit Quad I2C DAC (4.096

The ADG1604 is a complementary metal-oxide semiconductor(CMOS) analog multiplexer and switches one of four inputs toa common output, D, as determined by the 3-bit binary addresslines, A0, A1, and EN. Logic 0 on the EN pin disables the device.Each switch conducts equally well in both directions when onand has an input signal range that extends to the supplies. Inthe off condition, signal levels up to the supplies are blocked.All switches exhibit break-before-make switching action.Inherent in the design is low charge injection for minimumtransients when switching the digital inputs.The ultralow on resistance of these switches make them idealsolutions for data acquisition and gain switching applications wherelow on resistance and distortion is critical. The on resistance profileis very flat over the full analog input range, ensuring excellentlinearity and low distortion when switching audio signals.The CMOS construction ensures ultralow power dissipation,making the devices ideally suited for portable and batterypoweredinstruments.Product Highlights 1.6 Ω maximum on resistance over temperature. Minimum distortion: THD + N = 0.007%. 3 V logic-compatible digital inputs: VINH = 2.0 V, VINL = 0.8 V. No VL logic power supply required. Ultralow power dissipation: <16 nW. 14-lead TSSOP and 16-lead, 4 mm × 4 mm LFCSP.Applications Communication systems Medical systems Audio signal routing Video signal routing Automatic test equipment Data acquisition systems Battery-powered systems Sample-and-hold systems Relay replacements