2-Channel PMBus Power System Manager Featuring Programmable Power Good Outputs Features: Sequence, Trim, Margin and Supervise Two Power Supplies Manage Faults, Monitor Telemetry PMBus Compliant Command Set Supported by LTpowerPlay® GUI Margin or Trim Supplies to Within 0.25% of Target Monitor Input Current (±1%) and Accumulate Energy Fast OV/UV Supervisors per Channel Coordinate Sequencing and Fault Management Across Multiple ADI PSM Devices Automatic Fault Logging to Internal EEPROM Operate Autonomously Without Additional Software Configurable Power Good Output Pins Accurate Monitoring of Output Voltage, Output Current, Temperature, and Input Voltage and Current 1.8V to 3.3V I2C/SMBus Serial Interface Connect Directly to Regulator IMON Pins Can Be Powered from 3.3V, or 4.5V to 15V Available in 44-Pin 6mm × 7mm QFN Package LTpowerPlay® Configuration and Development Tool

Fast 60V Protected High Side NMOS Static Switch Driver Features: Wide Operating VIN: 3.5V to 60V 1Ω Pull-Down, 2.2Ω Pull-Up for Fast Turn-On and Turn-Off Times with 35ns Propagation Delays Internal Charge Pump for 100% Duty Cycle Short-Circuit Protected Adjustable Current Trip Threshold Current Monitor Output Automatic Restart Timer Open-Drain Fault Flag Adjustable Turn-On Slew Rate Gate Driver Supply from 3.5V to 15V Adjustable VIN Undervoltage and Overvoltage Lockouts Adjustable Driver Supply VCC Undervoltage Lockout Low Shutdown Current: 1µA CMOS Compatible Input Thermally Enhanced, High Voltage Capable 16-Lead MSOP Package AEC-Q100 Qualified for Automotive Applications

20V, 200mA, Ultralow Noise, Ultrahigh PSRR Precision DAC/Reference Buffer Features: Ultralow Wideband Noise: 1.2µVRMS (10Hz to 100kHz) Ultralow 1/f Noise: 0.6µVP-P (0.1Hz to 10Hz) Ultralow Spot Noise: 4nV/√Hz at 1kHz and Above Ultrahigh PSRR: 73dB at 1MHz Ultralow Input Offset: 125µV Output Source Current: 200mA Wide Input Voltage Range: 1.8V to 20V Rail to Rail Output Voltage Range: 0V to 15V Single Capacitor Improves Noise and PSRR Fast Start-Up for VIN Pin FAULT Flag High Bandwidth: 1MHz Low Dropout Voltage: 350mV Programmable Current Limit Precision Enable/UVLO Parallelable for Lower Noise and Higher Current Internal Current Limit with Foldback Minimum Output Capacitor: 4.7µF Ceramic Reverse Supply and Reverse Current Protection Thermal Limit with Hysteresis 10-Lead 3mm × 3mm DFN and 12-Lead MSOP

Quad DC/DC Module Regulator with Configurable 1.2A Output Array Features: Quad Output Step-Down µModule Regulator with 1.2A per Output Channel Wide Input Voltage Range: 2.7V to 17V 0.6V to 1.8V Output Voltage 1.2A DC, Parallelable, Output Current Each Channel ±1.5% Total Output Voltage Regulation 100% Duty Cycle Operation Current Mode Control, Fast Transient Response External Frequency Synchronization Selectable Burst Mode® Operation Power Good Indicator Over Voltage, Current and Temperature Protection 6.25mm × 6.25mm × 2.1mm BGA Package Pin Compatible with LTM4668A (0.6V to 5.5V Output, 2.25MHz)

60V, 1.5A LED Driver with Internal Exponential Scale Dimming Features: Operates in Boost, SEPIC, Buck Mode and Buck-Boost Mode 128:1 Internal Exponential Scale PWM Dimming Wide Input Voltage Range (3V to 60V) 1.5A, 60V Internal Switch 20000:1 External PWM Dimming at 100Hz ±2% LED Current and Output Voltage Regulation PMOS Switch Driver for PWM Dimming LED Short/Open Protection and Indication Constant Voltage and Constant Current Regulation Adjustable 300kHz to 2MHz Switching Frequency Adjustable 100Hz to 1kHz PWM Generator Frequency Internal Spread Spectrum Frequency Modulation Easy Synchronization to External Clock Programmable VIN UVLO with Hysteresis Available in 16-Lead MSOP Package

Micropower Quad 10-Bit DAC Features: Tiny: 4 DACs in the Board Space of an SO-8 Micropower: 59µA per DAC Plus 1µA Sleep Mode for Extended Battery Life Wide 2.7V to 5.5V Supply Range Rail-to-Rail Voltage Outputs Drive 1000pF Reference Range Includes Supply for Ratiometric 0V to VCC Output Reference Input Impedance is Code-Independent —Eliminates External Reference Buffer Individually Addressable DACs Differential Nonlinearity: ≤ ±0.75LSB Max Pin-Compatible Octal Version Available (LTC1660)

Single Channel Transimpedance Amplifier with Output Multiplexing Features: 220MHz –3dB Bandwidth with 2pF Input Capacitance Single-Ended Output 74kΩ Transimpedance Gain 4.8pA/√Hz Input Current Noise Density at 200MHz (2pF) 64nARMS Integrated Input Current Noise Over 200MHz (2pF) Linear Input Range 0µA to 30µA Overload Current > ±400mA Peak Fast Overload Recovery: 1mA in 10ns Fast Output MUXing: <50ns Single 5V Supply 90mW Power Dissipation 2VP-P Output Swing on 100Ω Load 3mm × 3mm, 16-Lead QFN Package Output MUX Combines Multiple LTC6560 Devices AEC-Q100 Qualified for Automotive Applications

105V, 2.3A Low EMI Synchronous Step-Down Regulator with Fast Current Programming Features: Wide VIN Range: 4.4V to 105V (110V Abs Max) Ultralow EMI/EMC Emissions: CISPR 25 Compliant 2μA IQ When Regulating 48VIN to 3.3VOUT Fast and Accurate Output Current Programming and Monitoring with No External RSENSE Brick Wall Current Limit Low Minimum On-Time: 40ns Wide VOUT Range: 1V to VIN PassThru™/100% Duty Cycle Capable Programmable Fixed Frequency: 200kHz to 2MHz Eight, Pin-Selectable Fixed (1.2V to 15V) or Adjustable Output Voltages Selectable Continuous, Pulse-Skipping, or Low Ripple Burst Mode® Operation at Light Loads PLL Synchronization to External Clock EXTVCC LDO Powers Chip from VOUT = 3.3V to 40V OPTI-LOOP® or Fixed Internal Compensation Input and Output Overvoltage Protection Thermally Enhanced (5mm × 6mm) QFN Package AEC-Q100 Qualification in Process

Isolated High Accuracy Digital Temperature Measurement System with EEPROM Features:5000VRMS Isolated Power and SPI InterfaceDirectly Digitizes 2-, 3- or 4-Wire RTDs, Thermocouples, Thermistors and Diodes10 Flexible Inputs Allow Interchanging SensorsAutomatic Thermocouple Cold Junction CompensationBuilt-In Standard and User-Programmable Coefficients for Thermocouples, RTDs and ThermistorsAutomatic Burn Out, Short-Circuit and Fault DetectionBuffered Inputs Allow External ProtectionSimultaneous 50Hz/60Hz RejectionIncludes 15ppm/°C (Max) ReferenceIncludes Special Protection ModesOn-Chip EEPROM Stores Channel Configuration Data and Custom Coefficients

Ultrathin 1.5A Module Thermoelectric Cooler (TEC) Regulator Features:Built-in Two Zero-Drift, Rail-to-Rail Chopper Amplifiers2.7V to 5.5V Input Voltage Range1.5A Driving Capability1% Accuracy 2.5V Internal Reference OutputIndependent Programmable Heating and Cooling Current LimitTEC Voltage and Current MonitoringProgrammable Maximum TEC VoltageDefault 2MHz Switching FrequencySynchronization from 1.85MHz to 3.25MHzCapable of NTC, PTC and RTD Thermal Sensors3.5mm 4mm 1.3mm LGA Package