IC CMOS SWITCH DUAL DPDT TSSOP-16; Analogue Switch Type:DPDT; No. of Channels:2Channels; On State Resistance Max:0.4ohm; Supply Voltage Range:4.2V to 5.5V; Analogue Switch Case:TSSOP; No. of Pins:16Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:ADG888 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Analogue Switch Case Style:TSSOP; Operating Temperature Range:-40°C to +125°C

SWITCH MUX/DEMUX DUAL 2:1 MSOP10; Analogue Switch Type:SPDT; No. of Channels:2Channels; On State Resistance Max:3.45ohm; Supply Voltage Range:1.8V to 5.5V; Analogue Switch Case:MSOP; No. of Pins:10Pins; Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Each; Product Range:ADG787 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Analogue Multiplexer Type:USB 1.1 Switch; Analogue Switch Case Style:MSOP; Bandwidth:145MHz; Base Number:787; IC Generic Number:787; Logic Function Number:787; On Resistance Rds(on):2.5ohm; Operating Temperature Range:-40°C to +85°C; Supply Voltage Max:5.5V; Supply Voltage Min:1.8V; Supply Voltage Source:Single; Termination Type:Surface Mount Device; Turn Off Time:3ns; Turn On Time:13ns

MCU 32BIT ARM7TDMI 44MHZ LQFP-40; Product Range:ARM7TDMI Microcontrollers; No. of Bits:32bit; CPU Speed:44MHz; Program Memory Size:62KB; RAM Memory Size:8KB; No. of Pins:40Pins; MCU Case Style:LQFP; No. of I/O's:40I/O's; Architecture:ARM7TDMI; Embedded Interface Type:I2C SPI UART; Supply Voltage Min:2.7V; Supply Voltage Max:3.6V; Packaging:Each; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2016); Controller Family/Series:(ARM7) ADuC; EEPROM Memory Size:62KB; IC Generic Number:7026BSTZ62; Logic Function Number:62; MPU Core Size:32bit; Memory Type:Flash; Microprocessor/Controller Features:ARM7TDMI core 16-bit/32-bit RISC architecture/JTAG port supports code download and debug; No. of ADC Inputs:12; No. of PWM Channels:6; No. of Timers:4; Operating Temperature Max:125°C; Operating Temperature Min:-40°C; Operating Temperature Range:-40°C to +125°C; Oscillator Type:External Internal; Peripherals:ADC Comparator DAC PLA PSM PWM Timer Temp Sensor; Program Memory Size:62KB

IC OP AMP LOW POWER R TO R; No. of Amplifiers:2 Amplifier; Bandwidth:125MHz; Slew Rate:60V/µs; Supply Voltage Range:2.7V to 12V; Amplifier Case Style:SOIC; No. of Pins:8Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:AD8030 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Amplifer Supply Voltage:2.7V to 12V; Base Number:8030; Gain Bandwidth:120MHz; I/O Type:Rail-Rail I/O; Input Offset Voltage Max:6mV; No. of Amplifiers:2Amplifiers; Op Amp Type:Low Power; Operating Temperature Range:-40°C to +125°C; Settling Time:80ns; Supply Voltage + Nom:12.6V; Supply Voltage Max:12V; Supply Voltage Min:2.7V; Supply Voltage Type:Single

The ADuM3400/ADuM3401/ADuM3402 are 4-channel digitalisolators based on the Analog Devices, Inc., iCoupler® technology.Combining high speed CMOS and monolithic air coretransformer technology, these isolation components provideoutstanding performance characteristics superior to alternativessuch as optocoupler devices.iCoupler devices remove the design difficulties commonlyassociated with optocouplers. Typical optocoupler concernsregarding uncertain current transfer ratios, nonlinear transferfunctions, and temperature and lifetime effects are eliminatedwith the simple iCoupler digital interfaces and stable performancecharacteristics. The need for external drivers and other discretecomponents is eliminated with these iCoupler products. Furthermore,iCoupler devices consume one-tenth to one-sixth thepower of optocouplers at comparable signal data rates.The isolators provide four independent isolation channels in avariety of channel configurations and data rates (see theOrdering Guide). All models operate with the supply voltage oneither side ranging from 2.7 V to 5.5 V, providing compatibilitywith lower voltage systems as well as enabling a voltagetranslation functionality across the isolation barrier. Theisolators have a patented refresh feature that ensures dc correctnessin the absence of input logic transitions and during powerup/power-downconditions.In comparison to the ADuM1400/ADuM1401/ADuM1402isolators, the ADuM3400/ADuM3401/ADuM3402 isolatorscontain various circuit and layout changes to provide increasedcapability relative to system-level IEC 61000-4-x testing (ESD/burst/surge). The precise capability in these tests for either set ofisolators is strongly determined by the design and layout of theuser’s board or module. For more information, see the AN-793 application note, ESD/Latch-Up Considerations with iCoupler Isolation Products.Applications General-purpose multichannel isolation SPI/data converter isolation RS-232/RS-422/RS-485 transceivers Industrial field bus isolation

The ADM1192 is an integrated current sense amplifier that offers digital current and voltage monitoring via an on-chip, 12-bit analog-to-digital converter (ADC), communicated through an I2C interface.An internal current sense amplifier senses voltage across the sense resistor in the power path via the VCC pin and the SENSE pin.A 12-bit ADC can measure the current seen in the sense resistor and in the supply voltage on the VCC pin. An industry-standard I2C interface allows a controller to read current and voltage data from the ADC. Measurements can be initiated by an I2C command. Alternatively, the ADC can run continuously, and the user can read the latest conversion data whenever it is required. Up to four unique I2C addresses can be created, depending on the way the ADR pin is connected.A SETV pin is also included. A voltage applied to this pin is internally compared to the output voltage on the current sense amplifier. The output of the SETV comparator asserts when the current sense amplifier output exceeds the SETV voltage. This event is detected at the ALERT block. The ALERT block then charges up the external TIMER capacitor with a fixed current. When this timing cycle is complete, the ALERT output asserts.The ALERT output can be used as a flag to warn a micro-controller or field programmable gate array (FPGA) of an overcurrent condition. ALERT outputs of multiple ADM1192 devices can be tied together and used as a combined alert.A basic P-channel FET hot swap circuit can be implemented with the ALERT output. The value of the TIMER capacitor should be set so that the charging time of this capacitor is much longer than the period where a higher than nominal inrush current may be flowing.The ADM1192 is packaged in a 10-lead MSOP.APPLICATIONS Power monitoring/power budgeting Central office equipment Telecommunication and data communication equipment PCs/servers

The ADM709 contains a power supply monitor which generates a system reset during power-up, power-down and brownout conditions. When VCC falls below the reset threshold, RESET goes low and holds the µP in reset. On power-up the RESET output is held low for 140 ms after VCC rises above the threshold. The RESET output remains operational with VCC as low as 1 V.Three supply-voltage threshold levels are available suitable for +5 V, +3.3 V and for +3 V supply monitoring. The actual reset voltage threshold is found in the data sheet.The ADM709 is available in 8-pin DIP and SOIC packages.APPLICATIONS Microprocessor Systems Computers Controllers Intelligent Instruments Critical mP Monitoring Automotive Systems Critical mP Power Monitoring 

RF AMPLIFIERS;

The ADA4891-1 (single), ADA4891-2 (dual), ADA4891-3 (triple), and ADA4891-4 (quad) are CMOS, high speed amplifiers that offer high performance at a low cost. The amplifiers feature true single-supply capability, with an input voltage range that extends 300 mV below the negative rail. In spite of their low cost, the ADA4891 family provides high performance and versatility. The rail-to-rail output stage enables the output to swing within 50 mV of each rail, enabling maximum dynamic range. The ADA4891 family of amplifiers is ideal for imaging applications, such as consumer video, CCD buffers, and contact image sensor buffers. Low distortion and fast settling time also make them ideal for active filter applications. The ADA4891-1/ADA4891-2/ADA4891-3/ADA4891-4 are available in a wide variety of packages. The ADA4891-1 is available in 8-lead SOIC and 5-lead SOT-23 packages. The ADA4891-2 is available in 8-lead SOIC and 8-lead MSOP packages. The ADA4891-3 and ADA4891-4 are available in 14-lead SOIC and 14-lead TSSOP packages. The amplifiers are specified to operate over the extended temperature range of −40°C to +125°C.Applications Imaging Consumer video Active filters Coaxial cable drivers Clock buffers Photodiode preamp Contact image sensor and buffers

The HMC1040LP3CE is a self-biased GaAs MMIC Low Noise Amplifier housed in a leadless 3x3 mm plastic surface mount package. The amplifier operates between 24 and 43.5 GHz, delivering 23 dB of small signal gain, 2.2 dB noise figure, and output IP3 of +22 dBm, while requiring only 70 mA from a +2.5 V supply. The P1dB output power of +12 dBm enables the LNA to function as a LO driver for many of Hittite’s balanced, I/Q and image reject mixers. The HMC1040LP 3CE features I/Os that are DC blocked and internally matched to 50 Ohms, and is ideal for high capacity microwave radios and VSAT applications.Applications Point-to-Point Radios Test Instrumentation SatCom Transponders & VSAT Industrial Sensors EW & ECM Subsystems