Ultra-Low-Noise, High-Accuracy 5.0V Voltage Reference Features: Maximum temperature coefficient (TCVOUT): 0.8 ppm/°C (D grade 0°C to 70°C) 1 ppm/°C (C grade 0°C to 70°C) 2 ppm/°C (B grade −40°C to +125°C) 4 ppm/°C (A grade 40°C to +125°C) Output noise (0.1 Hz to 10 Hz): 1 μV p-p at VOUT of 2.048 V typical Initial output voltage error: B, C, D grade: ±0.02% (maximum) Input voltage range: 3 V to 15 V Operating temperature: A grade and B grade: −40°C to +125°C C grade: 0°C to +70°C Output current: +10 mA source/−10 mA sink Low quiescent current: 950 μA (maximum) Low dropout voltage: 300 mV at 2 mA (VOUT ≥ 3 V) 8-lead SOIC package and LCC package AEC-Q100 qualified for automotive applications Long-term drift: 8 ppm typical at 4500 hours

Silicon SPDT Switch, Reflective, 9 kHz to 44 GHz Features: Ultrawideband frequency range: 9 kHz to 44 GHz Reflective design Low insertion loss with impedance match 0.9 dB typical to 18 GHz 1.4 dB typical to 40 GHz 1.6 dB typical to 44 GHz Low insertion loss without impedance match 0.9 dB typical to 18 GHz 1.7 dB typical to 40 GHz 2.2 dB typical to 44 GHz High input linearity P1dB: 27.5 dBm typical IP3: 50 dBm typical High RF input power handling Through path: 27 dBm Hot switching: 27 dBm No low frequency spurious RF settling time (50% VCTL to 0.1 dB final RF output): 3.4 μs 12-terminal, 2.25 mm × 2.25 mm LGA package Pin compatible with the ADRF5024 fast switching version

Silicon SPDT Switch, Nonreflective, 100 MHz to 44 GHz Features: Ultrawideband frequency range: 100 MHz to 44 GHz Nonreflective design Low insertion loss: 1.2 dB to 18 GHz 1.7 dB to 26 GHz 2.4 dB to 40 GHz 3.8 dB to 44 GHz High isolation 55 dB to 18 GHz 53 dB to 26 GHz 50 dB to 40 GHz 45 dB to 44 GHz High input linearity P1dB: 27 dBm typical IP3: 53 dBm typical High power handling 24 dBm insertion loss path 24 dBm isolation path All off state control No low frequency spurious signals 0.1 dB RF settling time: 40 ns typical 20-terminal, 3 mm × 3 mm LGA package Pin compatible with ADRF5027, low frequency cutoff versionADRF5026-EP supports defense and aerospace applications (AQEC standard) Download ADRF5026-EP data sheet (pdf) Supports defense and aerospace applications (AQEC standard) Military temperature range (−55°C to +105°C) Controlled manufacturing baseline 1 assembly/test site 1 fabrication site Product change notification Qualification data available on request V62/21601 DSCC Drawing Number

Nonreflective, 9 kHz to 44 GHz Silicon SP4T Switch Features: Ultrawideband frequency range: 9 kHz to 44 GHz Nonreflective 50 Ω design Low insertion loss: 1.5 dB at 18 GHz 2.4 dB at 40 GHz 2.5 dB at 44 GHz High isolation: 44 dB at 18 GHz 39 dB at 40 GHz 36 dB at 44 GHz High input linearity: P0.1dB: 26 dBm typical IP3: 48 dBm typical High power handling 24 dBm through path 24 dBm terminated path All off state control Logic select control No low frequency spurs Settling time (0.1 dB final RF output): 6 μs 24-terminal, 3 mm × 3 mm LGA package Pin compatible with ADRF5042, fast switching version

16-Bit, 15 MSPS, Module Data Acquisition Solution Features: Integrated fully differential ADC driver with signal scaling Wide input common range High common-mode rejection Single-ended to differential conversion 2.048 V input range with 4.096 V REFBUF Critical passive components 0.005% precision matched resistor array for FDA 9 mm × 9 mm, 0.8 mm pitch, 100-ball BGA package 4× footprint reduction versus discrete solution Low power, dynamic power scaling, power-down mode 143 mW typical at 15 MSPS Throughput: 15 MSPS, no pipeline delay INL: 0.4 LSB typical, 1 LSB maximum SINAD: 89 dB typical at 1 kHz THD: 115 dB at 1 kHz, 106 dB at 400 kHz Gain error: 0.005% FS typical Gain error drift: 1 ppm/C maximum On-board reference buffer with VCMO generation Serial LVDS interface Wide operating temperature range: 40C to +85C

10 GHz to 40 GHz, 1:4 Channel, 4 Frequency Multiplier/Filter Features: 4 input frequency multiplier with programmable harmonic filter Quad Differential Output PAs with independent Enable Control Input Frequency Range: 2.5 GHz to 10 GHz Output Frequency Range: 10 GHz to 40 GHz Input power: 20 dBm (50 ) Output power: 5 dBm differential (100 ) Harmonic rejection: 20 dBc to 40 dBc at all frequencies 3-Wire or 4-Wire SPI Control of all functions On-Chip Programmable State Machines for fast multiplier/filter and transmitter switching and control On-chip temperature sensor, output power detectors, and ADC DC power: 450 mW (2.5 V supply) 6 mm 6 mm, 40-terminal LGA package

0.5 GHz to 19 GHz Broadband Bi-Directional Single Channel True Time Delay Unit Features:0.5 GHz to 19 GHz frequency rangeProgrammable Time Delay: 7-bit resolutionProgrammable Time Delay ModesTD_Mode0: 0 to 508ps range, 4ps Standard resolutionTD_Mode1: 0 to 254ps range, 2ps High resolutionProgrammable Attenuation: 6-bit resolution31.5 dB adjustment range0.5 dB step sizeFully programmable via a 3-wire or 4-wire SPI interfaceSPI Programmable and Daisy Chaining selectablePower Dissipation: 1 mW with 1.2V and 1.0V Dual Supplies14-pin 2x3mm LFCSP

Rail-to-Rail, Fast, Low Power 2.5 V to 5.5 V, Single-Supply TTL/CMOS Comparator Features: Fully specified rail-to-rail at VCC = 2.5 V to 5.5 V Input common-mode voltage from −0.2 V to VCC + 0.2 V Low glitch TTL-/CMOS-compatible output stage 40 ns propagation delay Low power 1 mW at 2.5 V Shutdown pin Programmable hysteresis Power supply rejection > 60 dB −40°C to +125°C operation

Microwave Wideband Synthesizer with Integrated VCO Features: Output frequency range: 800 MHz to 12.8 GHz Jitter = 18 fsRMS (Integration BW: 100 Hz to 100 MHz) Jitter = 27 fsRMS (ADC SNR Method) Wideband Noise Floor: -160 dBc/Hz @12 GHz PLL Specifications: -239 dBc/Hz: Normalized In-Band Phase Noise Floor -147 dBc/Hz: Normalized In-Band 1/f Noise Phase Detector Frequency up to 500 MHzReference Input Frequency up to 1 GHz Typical -100 dBc PFD spursReference to Output Delay Specifications: Part-to-Part Standard Deviation: 3 ps Temperature Drift: 0.03 ps/ Adjustment Step Size: <+/-0.1 ps Multi-chip Output Phase Alignment 3.3 V and 5 V Power supplies 7 mm x 7 mm 48 Lead LGA

Low Capacitance, Low Charge Injection, 15 V/+12 V iCMOS Quad SPST Switch Features: 1 pF off capacitance 2.6 pF on capacitance <1 pC charge injection 33 V supply range 120 Ω on resistance Fully specified at ±15 V, +12 V No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 16-lead TSSOP and 16-lead LFCSP Typical power consumption: <0.03 μW