Synchronous Current-Mode Buck Controller with Constant On-time, 0.8 V Reference Voltage, and Power Saving Mode Features: Power input voltage as low as 2.75 V to 20 V Bias supply voltage range: 2.75 V to 5.5 V Minimum output voltage: 0.6 V 0.8 V reference voltage with ±1.0% accuracy Supports all N-channel MOSFET power stages Available in 300 kHz, 600 KHz, and 1.0 MHz options No current-sense resistor required Power saving mode (PSM) for light loads (ADP1883 only) Resistor Programmable Current Sense Gain Thermal overload protection Short-circuit protection See data sheet for additional features

Configurable, Dual 2 A/Single 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Configurable 3 A/1 A or 2 A/2 A dual output load combinations or 4 A combined single output High efficiency: up to 95% Input voltage VIN: 2.75 V to 5.5 V Selectable fixed output: 0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V, 3.3 V or adjustable output voltage to 0.6 V minimum ±1.5% accuracy reference voltage Selectable fixed switching frequency: 300 kHz, 600 kHz, or 1.2 MHz Optimized gate slew rate for reduced EMI External synchronization or internal clock output Dual-phase, 180° shifted PWM channels Current mode for fast transient response, no current sense resistor required Pulse-skip under light load or forced PWM operation See data sheet for additonal features

2A, 1.2MHz Synchronous Step-Down DC-to-DC Regulator Features: Continuous output current: 2A 145 mΩ and 70 mΩ integrated FET Input voltage range from 2.3 V to 5.5 V Output voltage from 0.6V to VIN Precision threshold enable input ±1.5% output accuracy Supported by ADIsimPower™ design tool See datasheet for additional features

20 V, 4 A, Synchronous Step-Down DC-to-DC Regulator Features: Input voltage: 4.5 V to 20 V Integrated MOSFET: 44 m/11.6 m Reference voltage: 0.6 V ± 1% Continuous output current: 4 A 180° out of phase clock synchronizationSynchronizes to external clock: 200 kHz to 1.4 MHz Programmable switching frequency: 200 kHz to 1.4 MHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

20 V, 6 A, Synchronous Step-Down DC-to-DC Regulator Features: Input voltage: 4.5 V to 20 V Integrated MOSFET: 44 m/11 m Reference voltage: 0.6 V ± 1% Continuous output current: 6 A Programmable switching frequency: 200 kHz to 1.4 MHz Synchronizes to external clock: 200 kHz to 1.4 MHz 180° out of phase clock synchronization Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

20 V, 6 A, Synchronous, Step-Down DC-to-DC Regulator Features: Input voltage range: 4.5 V to 20 V Integrated MOSFET: 44 mΩ typical/11 mΩ typical Reference voltage: 0.6 V ± 1% Continuous output current: 6 A Programmable current-limit thresholdProgrammable switching frequency: 200 kHz to 1400 kHz Precision enable and power good External compensation Internal soft start with external adjustable option Startup into a precharged output Supported by ADIsimPower design tool

18 V, 12 A Step-Down Regulator with Programmable Current Limit Features: Input voltage: 4.5 V to 18 V Continuous output current: 12 A Integrated MOSFETs: 17 mΩ high-side/4.5 mΩ low-side 0.6 V ± 0.5% reference voltage Programmable switching frequency range: 200 kHz to 2200 kHz Enhanced transient response Programmable current limit with ±10% accuracy Precision enable and power good External compensation and soft start Start up into a precharged output Supported by the ADIsimPower design tool

3 A, 36 V, Synchronous Step-Down DC-to-DC Regulator Features: Continuous output current: 3 A Input voltage: 4.5 V to 36 V Integrated MOSFETs: 98 mΩ/35 mΩ Reference voltage: 0.6 V ± 1% Fast minimum on time: 50 ns Programmable switching frequency: 200 kHz to 1.8 MHz Synchronizes to external clock: 200 kHz to 1.8 MHz Precision enable and power good Cycle-by-cycle current limit with hiccup protection External compensation Programmable soft start time Startup into a precharged output Supported by ADIsimPower design tool

600 mA, 2.5 MHz Buck-Boost DC-to-DC Converter Features: 1 mm height profile Compact PCB footprint Seamless transition between modes 38 μA typical quiescent current 2.5 MHz operation enables 1.5 μH inductor Input voltage: 2.3 V to 5.5 V Fixed output voltage: 2.8 V to 5.0 V See data sheet for additional features

Ultralow Power Energy Harvester PMU with MPPT and Charge Management Features: Boost regulator with maximum power point tracking (MPPT) with dynamic sensing or no sensing mode Hysteresis mode for best ultralight load efficiency Operating quiescent current of SYS pin (VIN > VCBP ≥ VMINOP): 510 nA Sleeping quiescent current of SYS pin (VCBP < VMINOP): 390 nA Input voltage operating range: 0.08 V to 3.3 V Fast cold start from 380 mV (typical) with charge pump Programmable shutdown point on MINOP pin based on the input open circuit voltage (OCV) 150 mA regulated output from 1.5 V to 3.6 V Battery terminal charging threshold (2.2 V to 5.2 V) to support charging storage elements Optional BACK_UP power path management Radio frequency (RF) transmission conducive to shutting down the switcher temporarily via microcontroller unit (MCU) communication