OP AMP 15V 1.3MHZ 0.7V/US 8MSOP; No. of Amplifiers:2 Amplifier; Bandwidth:1.3MHz; Slew Rate:0.7V/µs; Supply Voltage Range:± 2.5V to ± 15V; Amplifier Case Style:MSOP; No. of Pins:8Pins; Operating Temperature Min:-40°C; Operating Temperature Max:125°C; Packaging:Each; Product Range:OP2177 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); Amplifer Supply Voltage:± 2.5V to ± 15V; No. of Amplifiers:2Amplifiers; Op Amp Type:Precision

RF/IF AMPLIFIER 16 dB 1 GHz 5.5 V 3-SOT-89 FULL REEL; Frequency Min:20MHz; Frequency Max:1GHz; Gain:16.7dB; Noise Figure Typ:3dB; RF IC Case Style:SOT-89; No. of Pins:3Pins; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V

High Performance Narrow-Band Transceiver IC Features: Low power, narrow-band transceiver Frequency bands using dual VCO 80 MHz to 650 MHz 842 MHz to 916 MHz Programmable IF filter bandwidths of 9 kHz, 13.5 kHz, and 18.5 kHz Modulation schemes: 2FSK, 3FSK, 4FSK, MSK Spectral shaping: Gaussian and raised cosine filtering Fully automatic frequency control loop (AFC) On-chip, 7-bit ADC and temperature sensor On-chip VCO and fractional-N PLL Data rates supported: 0.05 kbps to 24 kbps 2.3 V to 3.6 V power supply Programmable output power −16 dBm to +13 dBm in 63 steps Automatic power amplifier (PA) ramp control Receiver sensitivity −130 dBm at 100 bps, 2FSK −122 dBm at 1 kbps, 2FSK Patent pending, on-chip image rejection calibration Digital received signal strength indication (RSSI) Integrated Tx/Rx switch 0.1 μA leakage current in power-down mode

High Performance Narrow-Band Transceiver IC Features: Low power, narrow-band transceiver Frequency bands using dual VCO 80 MHz to 650 MHz 842 MHz to 916 MHz Programmable IF filter bandwidths of 9 kHz, 13.5 kHz, and 18.5 kHz Modulation schemes: 2FSK, 3FSK, 4FSK, MSK Spectral shaping: Gaussian and raised cosine filtering Fully automatic frequency control loop (AFC) On-chip, 7-bit ADC and temperature sensor On-chip VCO and fractional-N PLL Data rates supported: 0.05 kbps to 24 kbps 2.3 V to 3.6 V power supply Programmable output power −16 dBm to +13 dBm in 63 steps Automatic power amplifier (PA) ramp control Receiver sensitivity −130 dBm at 100 bps, 2FSK −122 dBm at 1 kbps, 2FSK Patent pending, on-chip image rejection calibration Digital received signal strength indication (RSSI) Integrated Tx/Rx switch 0.1 μA leakage current in power-down mode

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

Ultralow Quiescent Current, 150 mA, CMOS Linear Regulators Features: Ultralow quiescent current IQ = 560 nA with 0 μA load IQ = 860 nA with 1 μA load Stable with 1 μF ceramic input and output capacitors Maximum output current: 150 mA Input voltage range: 2.2 V to 5.5 V Low shutdown current: <50 nA typical Low dropout voltage: 195 mV @ 150 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature: ±3.5% 15 fixed output voltage options: 1.2 V to 4.2 V Adjustable output available PSRR performance of 72 dB @ 100 Hz See data sheet for additional features

Precision, Low Cost, High Speed, BiFET Dual Op Amp Features: Enhanced replacement for LF412 and TL082 AC performance Settles to ±0.01% in 1.0 μs 16 V/μs minimum slew rate (AD712J) 3 MHz minimum unity-gain bandwidth (AD712J) DC performance 200 V/mV minimum open-loop gain (AD712K) Surface mount available in tape and reel in accordance with the EIA-481A standard MIL-STD-883B parts available Single version available: AD711 Quad version: AD713 Available in PDIP, SOIC_N, and CERDIP packages AD712-EP supports defense and aerospace applications (AQEC standard) Download AD712-EP Data Sheet (pdf) Military temperature range  (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/11603 DSCC Drawing Number

2.5 kV Signal Isolated, 500 kbps, Half Duplex RS-485 Transceiver Features: RS-485 transceiver with electrical data isolation  Complies with ANSI TIA/EIA-485-A and ISO 8482: 1987(E) Slew rate-limited driver outputs Low power operation: 2.5 mA maximum  Suitable for 5 V or 3.3 V operations (VDD1) High common-mode transient immunity: >25 kV/μs See data sheet for additional features

6.5V, 4 A, High Efficiency, Step-Down DC-to-DC Regulator Features: 4 A continuous output current 43 mΩ and 29 mΩ integrated FET ±1.5% output accuracy Input voltage range: 2.7 V to 6.5 V Output voltage: 0.6 V to VIN Switching frequency Fixed frequency: 600 kHz or 1.2 MHz Adjustable frequency: 500 kHz to 1.4 MHz Synchronizable from 500 kHz to 1.4 MHzSelectable synchronize phase shift: 0° or 180° Current mode architecture Precision enable input Power-good output Voltage tracking input Integrated soft start Internal compensation Starts up into a precharged output UVLO, OVP, OCP, and thermal shutdown Available in 16-lead, 4 mm × 4 mm LFCSP package Supported by ADIsimPower™ design tool

1800 MHz TO 2700 MHz, 1 W RF Driver Amplifier Features: Operation from 1800 MHz to 2700 MHz Gain of 24.3 dB at 2140 MHz OIP3 of 45.5 dBm at 2140 MHz P1dB of 30.8 dBm at 2140 MHz Noise figure of 4.7 dB at 2140 MHz Power supply: 5 V Power supply current: 362 mA typical Internal active biasing Fast power-up/power-down function Compact 4 mm × 4 mm, 16-lead LFCSP ESD rating of ±1 kV (Class 1C) Pin-compatible with the ADL5605 (700 MHz to 1000 MHz)