Low Noise, Precision, High Speed Operational Amplifier (AVCL5) Features: Low Noise, 80 nV p-p (0.1 Hz to 10 Hz) 3 nV/vHz @ 1 kHz Low Drift, 0.2 µV/°C High Speed, 17 V/µs Slew Rate 63 MHz Gain Bandwidth Low Input Offset Voltage, 10 µV Excellent CMRR, 126 dB (Common-Voltage @ 11 V) High Open-Loop Gain, 1.8 Million Replaces 725, OP-07, SE5534 In Gains > 5 Available in Die Form

28 V, 200 mA, Low Noise, Linear Regulator Features: Low noise: 18 μV rms Power supply rejection ratio (PSRR): 66 dB at 10 kHz at VOUT = −3 V Positive or negative enable logic Stable with small 2.2 μF ceramic output capacitor Input voltage range: −2.7 V to −28 V Maximum output current: −200 mA Low dropout voltage: −185 mV at −200 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature +2% maximum/−3% minimum Low quiescent current, IGND = −650 μA with −200 mA load Low shutdown current: −2 μA Adjustable output from −1.22 V to −VIN + VDO Current-limit and thermal overload protection 6- and 8-lead LFCSP and 5-lead TSOT Supported by ADIsimPower tool

Low IQ Boost/SEPIC/Inverting Converter with 1A, 60V Switch Features: 3V to 40V Input Voltage Range Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 6μA 1A, 60V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Fixed 2MHz Switching Frequency Accurate 1.6V EN/UVLO Pin Threshold Internal Compensation and Soft-Start Low Profile (1mm) ThinSOT™ Package Low Profile (0.75mm) 8-Lead (3mm × 2mm) DFN Package DFN Package is AEC-Q100 Qualified ThinSOT Package AEC-Q100 Qualification is in Progress

Analog Comparators hi Speed Latched Comp-RSPECL , 10GHz

RF Detector RMS Detector, 70db DR, SE

RF Mixer 27-34GHz IQ mix

RF AMP, 23DB, 12-16GHZ, 5.5V, QFN-32; Frequency Min:12GHz; Frequency Max:16GHz; Gain:23dB; Noise Figure Typ:2.5dB; RF IC Case Style:QFN; No. of Pins:32Pins; Supply Voltage Min:4.5V; Supply Voltage Max:5.5V; Operating Temperature RoHS Compliant: Yes

COLOR SIGNAL DECODER, CMOS

RF Detector 54 dB, Log Det/Controller , 100-2700 MHz

42V, 2A/3A Peak Synchronous Step-Down Regulator with 2.5A Quiescent Current Features: Silent Switcher® 2 Architecture Ultralow EMI Emissions on Any PCB Eliminates PCB Layout Sensitivity Internal Bypass Capacitors Reduce Radiated EMI Optional Spread Spectrum Modulation Wide Input Voltage Range: 3.0V to 42V Ultralow Quiescent Current Burst Mode® Operation: <2.5µA IQ Regulating 12VIN to 3.3VOUT Output Ripple <10mVP-P High Efficiency 2MHz Synchronous Operation: >93% Efficiency at 1A, 12VIN to 5VOUT 2A Maximum Continuous Output, 3A Peak Transient Output Fast Minimum Switch-On Time: 45ns Adjustable and Synchronizable: 200kHz to 2.2MHz Allows Use of Small Inductors Low Dropout Peak Current Mode Operation Internal Compensation Output Soft-Start and Tracking Small 16-Lead 3mm × 3mm LQFN Package AEC-Q100 Qualified for Automotive Applications