28 V, 200 mA, Low Noise, Linear Regulator Features: Low noise: 18 μV rms Power supply rejection ratio (PSRR): 66 dB at 10 kHz at VOUT = −3 V Positive or negative enable logic Stable with small 2.2 μF ceramic output capacitor Input voltage range: −2.7 V to −28 V Maximum output current: −200 mA Low dropout voltage: −185 mV at −200 mA load Initial accuracy: ±1% Accuracy over line, load, and temperature +2% maximum/−3% minimum Low quiescent current, IGND = −650 μA with −200 mA load Low shutdown current: −2 μA Adjustable output from −1.22 V to −VIN + VDO Current-limit and thermal overload protection 6- and 8-lead LFCSP and 5-lead TSOT Supported by ADIsimPower tool

Dual-mode, Ka Band Upconverter withIntegrated Fractional-N PLL and VCO Features: RF output frequency range: 27 GHz to 31 GHz Two upconversion modes Direct upconversion from differential baseband I/Q (I/Q mode) Single upper sideband upconversion (IF mode) 1 dB bandwidth: 500 MHz (I/Q mode) Input frequency range: 2 GHz to 3 GHz (IF mode) Matched, 50 Ω, single-ended RF output Matched, 50 Ω, single-ended IF input Programmable baseband I/Q common mode-voltage Sideband rejection and carrier feedthrough optimization Combined RF and IF gain dynamic range: 70 dB Programmable automatic IF gain control Programmable via 3-wire or 4-wire SPI 40-terminal, 6 mm × 6 mm, RoHS compliant LGA

Ultracompact 1.5 A Thermoelectric Cooler (TEC) Controller Features: Patented high efficiency single inductor architecture Integrated low RDSON MOSFETs for the TEC controller TEC voltage and current operation monitoring No external sense resistor required Independent TEC heating and cooling current limits settings Programmable maximum TEC voltage 2.0 MHz PWM driver switching frequency External synchronization Two integrated zero drift, rail-to-rail chopper amplifiers Capable of NTC or RTD thermal sensors 2.50 V reference output with 1% accuracy Temperature lock indicator Available in a 25-ball, 2.5 mm × 2.5 mm WLCSP or in a 24-lead, 4 mm × 4 mm LFCSP AEC-Q100 qualified for automotive applications

Ultracompact, 3 A Thermoelectric Cooler (TEC) Controller Features: High efficiency single inductor architecture Integrated low RDSON MOSFETs for the TEC controller TEC voltage and current operation monitoring No external sense resistor required Independent TEC heating and cooling current-limit settings 2.0 MHz (typical) PWM driver switching frequency External synchronization Programmable maximum TEC voltage Two integrated, zero-drift, rail-to-rail chopper amplifiers Compatible with NTC or RTD thermal sensors 2.50 V reference output with 1% accuracy Temperature lock indicator Available in a 36-lead, 6 mm × 6 mm LFCSP

Three-Channel, Isolated Micropower Management Unit with Seven Digital Isolators Features: Wide input supply voltage range: 4.5 V to 60 V Integrated flyback power switch Generates isolated, independent bipolar outputs and factory programmable buck output VOUT1: 21 V, 24 V or 6 V to 28 V VOUT2: 5.15 V, 5.0 V, or 3.3 V VOUT3: −24 V to −5 V Uses a 1:1 ratio transformer for simplified transformer design Peak current limiting and OVP for flyback, buck, and inverting regulators Precision enable input and power-good output Adjustable switching frequency via SYNC input Internal compensation and soft start control per regulator High speed, low propagation delay, SPI signal isolation channels Three, 100 kbps general-purpose isolated data channels 9 mm × 7 mm LFCSP form factor enables small overall solution size −40°C to +125°C operating junction temperature range Conforms to CISPR11 Class B radiated emission limits Safety and regulatory approvals (pending) UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A 300 V rms basic insulation between slave, master, and field power domains (IEC 61010-1, pending) VDE certificate of conformity DIN V VDE 0884-10 (VDE 0884-10):2006-12 VIORM = 565 VPEAK

Three-Channel, Isolated Micropower Management Unit with Seven Digital Isolators Features: Wide input supply voltage range: 4.5 V to 60 V Integrated flyback power switch Generates isolated, independent bipolar outputs and factory programmable buck output VOUT1: 21 V, 24 V or 6 V to 28 V VOUT2: 5.15 V, 5.0 V, or 3.3 V VOUT3: −24 V to −5 V Uses a 1:1 ratio transformer for simplified transformer design Peak current limiting and OVP for flyback, buck, and inverting regulators Precision enable input and power-good output Adjustable switching frequency via SYNC input Internal compensation and soft start control per regulator High speed, low propagation delay, SPI signal isolation channels Three, 100 kbps general-purpose isolated data channels 9 mm × 7 mm LFCSP form factor enables small overall solution size −40°C to +125°C operating junction temperature range Conforms to CISPR11 Class B radiated emission limits Safety and regulatory approvals (pending) UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A 300 V rms basic insulation between slave, master, and field power domains (IEC 61010-1, pending) VDE certificate of conformity DIN V VDE 0884-10 (VDE 0884-10):2006-12 VIORM = 565 VPEAK

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Small, Low Power, 3-Axis 2 g Accelerometer Features:3-axis sensingSmall, low profile package4 mm 4 mm 1.45 mm LFCSPLow power: 350 A typicalSingle-supply operation: 1.8 V to 3.6 V10,000 g shock survivalExcellent temperature stabilityBandwidth adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant

Precision Zero Drift Current Sense Amplifier Features: Supply Range: 4V to 60V, 70V Maximum (LTC6102) 5V to 100V, 105V Maximum (LTC6102HV) ±10μV Input Offset Maximum ±50nV/°C Input Offset Drift Maximum Fast Response: 1μs Step Response Gain Configurable with Two Resistors Low Input Bias Current: 3nA Maximum PSRR 130dB Minimum Output Currents up to 1mA Operating Temperature Range: –40°C to 125°C Disable Mode (LTC6102-1 Only): 1μA Maximum Available in 8-Lead MSOP and 3mm × 3mm DFN Packages

16-Bit, 50Msps DAC Features: 50Msps Update Rate Pin Compatible 12-Bit, 14-Bit and 16-Bit Devices High Spectral Purity: 87dB SFDR at 1MHz fOUT 5pV-s Glitch Impulse Differential Current Outputs 20ns Settling Time Low Power: 180mW from ±5V Supplies TTL/CMOS (3.3V or 5V) Inputs Small Package: 28-Pin SSOP