18 GHz to 44 GHz, GaAs, pHEMT, 32 dBm (>1 W), MMIC Power Amplifier Features:ADPA7005AEHZ Output P1dB: up to 31 dBm typical PSAT: up to 32 dBm typical Gain: up to 15.5 dB typical Output IP3: up to 42.5 dBm typical Supply voltage: 5 V at 1400 mA 50 matched input/output 18-terminal, 7 mm × 7 mm LCC_HS package Integrated power detectorADPA7005CHIP Output P1dB: 31 dBm typical at 20 GHz to 34 GHz PSAT: 32 dBm typical at 20 GHz to 34 GHz Gain: 17 dB typical at 20 GHz to 34 GHz Output IP3: 41 dBm typical at 20 GHz to 34 GHz Supply voltage: 5 V at 1200 mA maximum 50 Ω matched input/output Die size: 3.75 mm × 3.47 mm × 0.1 mm

Two-Supply Diode-OR Current Balancing Controller Features:Shares Load Between Two SuppliesEliminates Need for Active Control of Input SuppliesNo Share Bus RequiredBlocks Reverse CurrentNo Shoot-Through Current During Start-Up or Faults0V to 18V High Side OperationEnable InputsMOSFET On Status OutputsDual Ideal Diode Mode16-Lead DFN (4mm × 3mm) and MSOP Packages

Complete Isolated RS485/RS422 Module Transceiver + Power Features: RS485/RS422 Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 CSA Component Acceptance Notice 5A Isolated DC Power: 5V at Up to 200mA No External Components Required 20Mbps or Low EMI 250kbps Data Rate High ESD: ±15kV HBM on Transceiver Interface High Common Mode Transient Immunity: 30kV/μs Integrated Selectable 120Ω Termination 3.3V (LTM2881-3) or 5.0V (LTM2881-5) Operation 1.62V to 5.5V Logic Supply Pin for Flexible Digital Interface Maximum Continuous Working Voltage: 560VPEAK High Input Impedance Failsafe RS485 Receiver Current Limited Drivers and Thermal Shutdown Compatible with TIA/EIA-485-A and PROFIBUS High Impedance Output During Internal Fault Condition Low Current Shutdown Mode (< 10μA) General Purpose CMOS Isolated Channel 15mm × 11.25mm BGA and LGA Packages

Low Noise, Wide Bandwidth, MEMS Accelerometer Features: Single, in-plane axis accelerometer with analog output Full-scale range: ±200 g Linear frequency response range: dc to 15 kHz typical (3 dB point) Resonant frequency: 28 kHz typical Sensitivity performance Sensitivity stability over temperature within ± 5% Linearity to ±0.2% of full-scale range Cross-axis sensitivity ± 1%/± 0.8% (z-axis acceleration effect on x-axis, y-axis acceleration effect on x-axis) Ultralow noise density 45 μg/√Hz Overrange sensing plus dc coupling allows fast recovery time Complete electromechanical self test Single-supply operation Output voltage ratiometric to supply Low power consumption: 1.0 mA typical Power saving standby operation mode with fast recovery RoHS compliant −40°C to +125°C temperature range 32-lead, 5 mm × 5 mm × 1.8 mm LFCSP package

Small, Low Power, 3-Axis 2 g Accelerometer Features:3-axis sensingSmall, low profile package4 mm 4 mm 1.45 mm LFCSPLow power: 350 A typicalSingle-supply operation: 1.8 V to 3.6 V10,000 g shock survivalExcellent temperature stabilityBandwidth adjustment with a single capacitor per axisRoHS/WEEE lead-free compliant

Bidirectional, Zero-Drift, Current Sense Amplifier Features: Typical 0.1 μV/°C offset drift Maximum ±200 μV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters included High common-mode input voltage range −2 V to +70 V, continuous operation −3 V to +80 V, continuous survival Minimum DC common-mode rejection ratio (CMRR): 90 dB Initial gain = 20 V/V Wide operating temperature range AD8418AWB and AD8418AB: −40°C to +125°C AD8418AWH: −40°C to +150°C Bidirectional operation Available in 8-lead SOIC_N, 8-lead MSOP, and FMEA tolerant 10-lead MSOP pinout AEC-Q100 qualified for automotive applications

Bidirectional, Zero-Drift, Current Sense Amplifier Features: Typical 0.1 μV/°C offset drift Maximum ±400 μV voltage offset over full temperature range 2.7 V to 5.5 V power supply operating range Electromagnetic interference (EMI) filters Included High common-mode input voltage range −2 V to +70 V operating −4 V to +85 V survival Initial gain = 20 V/V Wide operating temperature range: −40°C to +125°C Bidirectional operation Available in 8-lead SOIC and 8-lead MSOP Common-mode rejection ratio (CMRR): 86 dB, dc to 10 kHz Qualified for automotive applications

High Performance, Low Power, Rail-to-Rail Precision Instrumentation Amplifier Features: Low power: 330 μA maximum quiescent current Rail-to-rail output Low noise and distortion 8 nV/√Hz maximum input voltage noise at 1 kHz 0.15 μV p-p RTI noise (G = 100) 0.5 ppm nonlinearity with 2 kΩ load (G = 1) Excellent ac specifications 80 dB minimum CMRR at 10 kHz (G = 1) 2.2 MHz bandwidth (G = 1) High precision dc performance (AD8422BRZ) 150 dB minimum CMRR (G = 1000) 0.04% maximum gain error (G = 1000) 0.3 μV/°C maximum input offset drift 0.5 nA maximum input bias current Wide supply range 4.6 V to 36 V single supply ±2.3 V to ±18 V dual supply Input overvoltage protection: 40 V from opposite supply Gain range: 1 to 1000 Available in 8-lead LFCSP, 8-lead MSOP, and 8-lead SOIC_N

Low Cost, High Speed, Rail-to-Rail Amplifier Features: High speed and fast settling on 5 V 110 MHz, −3 dB bandwidth (G = +1) (AD8051/AD8052) 150 MHz, −3 dB bandwidth (G = +1) (AD8054) 145 V/μs slew rate 50 ns settling time to 0.1% Single-supply operation Output swings to within 25 mV of either rail Input voltage range: −0.2 V to +4 V; VS = 5 V Video specifications (G = +2) 0.1 dB gain flatness: 20 MHz; RL = 150 Ω Differential gain/phase: 0.03%/0.03° Low distortion −80 dBc total harmonic @ 1 MHz, RL = 100 Ω Outstanding load drive capability Drives 45 mA, 0.5 V from supply rails (AD8051/AD8052) Drives 50 pF capacitive load (G = +1) (AD8051/AD8052) Low power: 2.75 mA/amplifier (AD8054) Low power: 4.4 mA/amplifier (AD8051/AD8052)

Low Cost 200 MHz Differential Receiver Amplifier Features:High SpeedAD8130: 270 MHz, 1090 V/s @ G = +1AD8129: 200 MHz, 1060 V/s @ G = +10High CMRR94 dB min, dc to 100 kHz80 dB min @ 2 MHz70 dB @ 10 MHzHigh input impedance: 1 M differentialLow noiseAD8130: 12.5 nV/HzAD8129: 4.5 nV/HzInput common-mode range 10.5 VLow distortion, 1 V p-p @ 5 MHz:AD8130, -79 dBc worst harmonic @ 5 MHzAD8129, -74 dBc worst harmonic @ 5 MHzUser-adjustable gainNo external components for G = +1Power supply range +4.5 V to 12.6 VPower-down