Robust, Quad Channel Isolator W/ Input Disable & 0 Reverse Channels Features: High common-mode transient immunity: 100 kV/μs High robustness to radiated and conducted noise Low propagation delay 13 ns maximum for 5 V operation 15 ns maximum for 1.8 V operation 150 Mbps maximum guaranteed data rate Safety and regulatory approvals UL recognition 3000 V rms/3750 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE certificate of conformity DIN V VDE V 0884-11 (VDE V 0884-11):2017-01 VIORM = 849 V peak CQC certification per GB4943.1-2011 Backward compatibility ADuM140E1/ADuM141E1/ADuM142E1 pin-compatible with ADuM1400/ADuM1401/ADuM1402 Low dynamic power consumption 1.8 V to 5 V level translation High temperature operation: 125°C Fail-safe high or low options 16-lead, RoHS compliant, SOIC package Qualified for automotive applications

9.5 RON, 16-Channel, Differential 8-Channel, 15 V/+12 V/5 V iCMOS Multiplexers Features: 9.5 Ω on resistance at 25°C Up to 300 mA of continuous current Fully specified at ±15 V/+12 V/±5 V 3 V logic-compatible inputs Rail-to-rail operation Break-before-make switching action 28-lead TSSOP and 32-lead, 5 mm × 5 mm LFCSP

LC2MOS Quad SPST Switch Features: 44 V Supply Maximum Ratings VSS to VDD Analog Signal Range Low On-Resistance (< 70 Ω) Low ΔRON ( 9 Ω max) Low ΔRON Match ( 3 Ω max) Low Power Dissipation Fast Switching Times ton < 110 ns toff < 60 ns Low Leakage Current (3 nA max) Low Charge Injection (6 pC max) Break-Before-Make Switching Action

SPI, 1.5 RON, 15 V/5 V/+12 V, High Density Octal SPST Switch Features: SPI with error detection Includes CRC, invalid read and write address, and SCLK count error detection Supports burst mode and daisy-chain mode Industry-standard SPI Mode 0 and Mode 3 interface compatible Integrated passive components Route through of digital signals and supplies Guaranteed break-before-make switching allowing external wiring of switches to deliver multiplexer configurations 1.5 typical on resistance at 25°C (±15 V dual supply) 0.3 typical on resistance flatness at 25°C (±15 V dual supply) 0.1 typical on resistance match between channels at 25°C (±15 V dual supply) VSS to VDD analog signal range Fully specified at ±15 V, ±5 V, and +12 V 1.8 V logic compatibility with 2.7 V ≤ VL ≤ 3.3 V (excludes SPI readback to a 1.8 V device) 4 mm × 5 mm, 30-terminal LGA 

Robust, Industrial, Low Power 10BASE-T1L Ethernet PHY Features: 10BASE-T1L IEEE Standard 802.3cg-2019 compliant Supports 1.0 V p-p and 2.4 V p-p transmit levels Supports intrinsic safety applications Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p Low power consumption Single supply 1 V p-p: 45 mW typical Dual supply 1 V pk-pk: 39 mW typical Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Link and cable diagnostics MII, RMII and RGMII MAC interfaces MDIO Management Interface Single or dual supply with 1.8 V or 3.3 V operation Unmanaged configuration using pin strapping including 25 MHz crystal or external clock input (50 MHz for RMII) 3.3 V, 2.5 V, or1.8 V MAC interface VDDIO supply Integrated power supply monitoring and POR EMC test standards IEC 61000-4-4 EFT (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-5 surge (±4 kV) IEC 61000-4-6 conducted immunity (10 V/m) IEC 61000-4-3 radiated immunity (Class A) EN 55032 radiated emissions (Class B) Small package 40-lead (6 mm x 6 mm) LFCSP Temperature range Industrial: -40°C to +85°C Extended:-40°C to +105°C

Robust, Industrial, Low Power 10BASE-T1L Ethernet PHY Features: 10BASE-T1L IEEE Standard 802.3cg-2019 compliant Supports 1.0 V p-p and 2.4 V p-p transmit levels Supports intrinsic safety applications Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p Low power consumption Single supply 1 V p-p: 45 mW typical Dual supply 1 V pk-pk: 39 mW typical Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Link and cable diagnostics MII, RMII and RGMII MAC interfaces MDIO Management Interface Single or dual supply with 1.8 V or 3.3 V operation Unmanaged configuration using pin strapping including 25 MHz crystal or external clock input (50 MHz for RMII) 3.3 V, 2.5 V, or1.8 V MAC interface VDDIO supply Integrated power supply monitoring and POR EMC test standards IEC 61000-4-4 EFT (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-5 surge (±4 kV) IEC 61000-4-6 conducted immunity (10 V/m) IEC 61000-4-3 radiated immunity (Class A) EN 55032 radiated emissions (Class B) Small package 40-lead (6 mm x 6 mm) LFCSP Temperature range Industrial: -40°C to +85°C Extended:-40°C to +105°C

Robust, Industrial, Low Power 10BASE-T1L Ethernet MAC-PHY Features: 10BASE-T1L IEEE Standard 802.3cg-2019 compliant Integrated MAC with SPI interface SPI supporting 10 Mbps full duplex Supports OPEN Alliance 10BASE-T1x MAC-PHY serial interface Low power consumption: dual supply 42 mW typical Supports 1.0 V p-p and 2.4 V p-p transmit levels Autonegotiation capability Supports intrinsic safety applications External termination resistors Separate receive and transmit pins MDIO memory map accessible via SPI On Chip FIFOs: 20kB receive, 8kB transmit (configurable) Cut-through or Store and forward operation Rx high and low priority queues IEEE 1588 timestamp support Statistics counters 16 MAC addresses supported for frame filtering Link LED Unmanaged configuration using pin strapping including: Master/Slave selection Transmit amplitude 25 MHz crystal oscillator/25 MHz external clock input Single supply 1.8 V/3.3 V operation (mode dependent) Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p EMC test standards IEC 61000-4-4 electrical fast transient (EFT) (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-6 conducted immunity (10V/m) IEC 61000-4-5 surge (±4kV) IEC 61000-4-3 radiated immunity (Class A) EN55032 radiated emissions (Class B) Small package 40-lead (6 mm × 6 mm) LFCSP Wide temperature range -40°C to 105°C

Robust, Industrial, Low Power 10BASE-T1L Ethernet MAC-PHY Features: 10BASE-T1L IEEE Standard 802.3cg-2019 compliant Integrated MAC with SPI interface SPI supporting 10 Mbps full duplex Supports OPEN Alliance 10BASE-T1x MAC-PHY serial interface Low power consumption: dual supply 42 mW typical Supports 1.0 V p-p and 2.4 V p-p transmit levels Autonegotiation capability Supports intrinsic safety applications External termination resistors Separate receive and transmit pins MDIO memory map accessible via SPI On Chip FIFOs: 20kB receive, 8kB transmit (configurable) Cut-through or Store and forward operation Rx high and low priority queues IEEE 1588 timestamp support Statistics counters 16 MAC addresses supported for frame filtering Link LED Unmanaged configuration using pin strapping including: Master/Slave selection Transmit amplitude 25 MHz crystal oscillator/25 MHz external clock input Single supply 1.8 V/3.3 V operation (mode dependent) Cable Reach 1700 meters with 1.0 V p-p 1700 meters with 2.4 V p-p EMC test standards IEC 61000-4-4 electrical fast transient (EFT) (±4 kV) IEC 61000-4-2 ESD (±4 kV contact discharge) IEC 61000-4-2 ESD (±8 kV air discharge) IEC 61000-4-6 conducted immunity (10V/m) IEC 61000-4-5 surge (±4kV) IEC 61000-4-3 radiated immunity (Class A) EN55032 radiated emissions (Class B) Small package 40-lead (6 mm × 6 mm) LFCSP Wide temperature range -40°C to 105°C

Low Complexity, 2-Port Ethernet Switch with Integrated 10BASE-T1L PHYs Features: 10BASE-T1L IEEE® Std 802.3cg-2019™ compliant Supports 1.0 V p-p & 2.4 V p-p transmit Levels Cable reach Up to 1700 meters with 1.0 V p-p transmit level Up to 1700 meters with 2.4 V p-p transmit level Low power consumption Low power consumption - single supply 80 mW typ Dual supply 1.0 V p-p: 77 mW typical Integrated switch with SPI interface 10 Mbps full duplex 16 MAC addresses supported for frame forwarding Supports OPEN Alliance 10BASE-T1x MACPHY SPI MDIO memory map accessible via SPI Supports high & low priority queues Total buffer memory of 28 kB shared between ports and host Autonegotiation capability Managed or unmanaged configuration Cut through or store and forward operation IEEE 1588 time stamp capture on transmit and receive Diagnostics Frame generator and checker Multiple loopback modes IEEE test mode support Port dedicated statistics counters Link and cable diagnostics 25 MHz crystal or external clock input Single or dual supply with 1.8 V or 3.3 V operation Integrated power supply monitoring and POR Small package: 48-lead, 7 mm × 7 mm LFCSP Temperature range Industrial: 40°C to +85°C Extended: 40°C to +105°C

Precision MEMS IMU Module Features: Triaxial, digital gyroscope  ±125°/sec, ±500°/sec, ±2000°/sec dynamic range models 2°/hr in-run bias stability (ADIS16465-1)  0.15°/√hr angular random walk (ADIS16465-1 and ADIS16465-2)  ±0.05° axis to axis misalignment error  Triaxial, digital accelerometer, ±8 g 3.6 μg in-run bias stability Triaxial, delta angle, and delta velocity outputs Factory calibrated sensitivity, bias, and axial alignment Calibration temperature range: −40°C to +85°C   SPI-compatible data communications Programmable operation and control  Automatic and manual bias correction controls Data ready indicator for synchronous data acquisition External sync modes: direct, pulse, scaled, and output On demand self test of inertial sensors On demand self test of flash memory Single-supply operation (VDD): 3.0 V to 3.6 V 2000 g mechanical shock survivability Operating temperature range: −40°C to +105°C