40VIN, 1.2A Silent Switcher Module Regulator Features: Low Noise Silent Switcher® Architecture CISPR 22 Class B Compliance Wide Input Voltage Range: 3.2V to 40V Wide Output Voltage Range: 0.8V to 12V 1.2A Continuous Output Current at 24VIN, 5VOUT, TA = 85°C 1.75A Peak Output Current at 3.3VOUT Selectable Switching Frequency: 200kHz to 2.2MHz External Synchronization Configurable as an Inverter 4mm × 4mm × 1.82mm BGA Package

Five-Channel, Current Output DAC with Internal Reference and SPI Features: Per channel programmable output current ranges: 300 mA, 200 mA, 100 mA, 50 mA, 25 mA, 12.5 mA, 6.25 mA, and 3.125 mA  Flexible 2.1 V to VCC output supply voltages  Flexible single- or dual-supply operation 0.6 V maximum dropout voltage guaranteed Separate voltage supply per output channel Internal switches to optional negative supply Full 12-bit and 16-bit resolution at all ranges Guaranteed operation −40°C to 125°C (H-grade) Precision internal reference (10 ppm/°C maximum VREF temperature coefficient) or external reference Analog multiplexer monitors voltages and currents A/B toggle via SPI or dedicated pin 1.71 V to VCC digital input and output supply voltage 32-lead lead frame chip scale package (LFCSP)

High Voltage High Current Hot Swap Controller Features: Allows Safe Board Insertion into Live Backplane Wide Operating Voltage Range: 6.5V to 80V Drives Two Gates for High Power Applications Configurable Parallel, Staged Start or Single MOSFET Modes Adjustable Precision Current Limit: 6mV to 20mV Current Foldback Limits MOSFET Power SOA Timer Optimizes MOSFET Capability Monitors VGS and VDS for MOSFET Health 12V Gate Drive for Lower MOSFET RDS(ON) Parallelable Controllers for Very High Current Levels Available in 24-Lead Narrow SSOP and 24-Pin 4mm × 5mm QFN Packages

Digitally Controlled Programmable Gain Amplifiers in SOT-23 Features: 3-Bit Digital Gain Control in Three Gain-Code Options Rail-to-Rail Input Range Rail-to-Rail Output Swing Single or Dual Supply: 2.7V to 10.5V Total 11MHz Gain Bandwidth Product Input Noise Down to 8nV/√Hz System Dynamic Range to 120dB Input Offset Voltage: 1.5mV 8-Pin Low Profile (1mm) SOT-23 (ThinSOT™) Package

Linear SuperCap Charger with Current-Limited Ideal Diode and V/I Monitor Features: 50mΩ Ideal Diode from VIN to VOUT Smart Charge Current Profile Limits Inrush Current Internal Cell Balancer (No External Resistors) Programmable Output Voltage (LDO Mode) Programmable VIN to VOUT Current Limit Continuous Monitoring of VIN to VOUT Current via PROG Pin Low Quiescent Current: 20μA VIN Power Fail, PGOOD Indicator 2.45V/2.7V Cell Protection Shunts (4.9V/5.4V SuperCap Max Top-Off Voltage) 3A Peak Current Limit, Thermal Limiting Tiny Application Circuit, 3mm × 3mm × 0.75mm DFN and 12-Lead MSOP Packages

Complete Isolated RS485/RS422 Module Transceiver + Power Features: RS485/RS422 Transceiver: 2500VRMS for 1 Minute UL-CSA Recognized File #E151738 CSA Component Acceptance Notice 5A Isolated DC Power: 5V at Up to 200mA No External Components Required 20Mbps or Low EMI 250kbps Data Rate High ESD: ±15kV HBM on Transceiver Interface High Common Mode Transient Immunity: 30kV/μs Integrated Selectable 120Ω Termination 3.3V (LTM2881-3) or 5.0V (LTM2881-5) Operation 1.62V to 5.5V Logic Supply Pin for Flexible Digital Interface Maximum Continuous Working Voltage: 560VPEAK High Input Impedance Failsafe RS485 Receiver Current Limited Drivers and Thermal Shutdown Compatible with TIA/EIA-485-A and PROFIBUS High Impedance Output During Internal Fault Condition Low Current Shutdown Mode (< 10μA) General Purpose CMOS Isolated Channel 15mm × 11.25mm BGA and LGA Packages

15V, 200mA Synchronous Buck-Boost DC/DC Converter with 1.3A Quiescent Current Features:Regulates VOUT Above, Below or Equal to VINWide VIN Range: 2.42V to 15V, 1.92V to 15V After Start-Up (Bootstrapped)Wide VOUT Range: 1.4V to 15.75V200mA Output Current in Buck ModeSingle Inductor1.3μA Quiescent CurrentProgrammable Maximum Power Point Control1.2MHz Ultralow Noise PWMCurrent Mode ControlPin Selectable Burst Mode® OperationUp to 95% EfficiencyAccurate RUN Pin ThresholdPower Good Indicator10nA Shutdown CurrentThermally Enhanced 3mm × 3mm QFN and 16-Lead MSOP Packages

80V VIN and VOUT Synchronous 4-Switch Buck-Boost DC/DC Controller Features:Single Inductor Allows VIN Above, Below, or Equal to Regulated VOUTVIN Range 2.8V (Need EXTVCC > 6.4V) to 80VVOUT Range: 1.3V to 80VQuad N-Channel MOSFET Gate DriversSynchronous Rectification: Up to 98% EfficiencyInput and Output Current Monitor PinsSynchronizable Fixed Frequency: 100kHz to 400kHzIntegrated Input Current, Input Voltage, Output and Output Voltage Feedback LoopsClock Output Usable To Monitor Die TemperatureAvailable in 38-Lead (5mm × 7mm) QFN and TSSOP Packages with the TSSOP Modified for Improve Voltage Operation

Multichemistry Buck Battery Charger Controller with Digital Telemetry System Features: Multichemistry Li-Ion/Polymer, LiFePO4, or Lead-Acid Battery Charger with Termination High Efficiency Synchronous Buck Battery Charger Digital Telemetry System Monitors VBAT, IBAT, RBAT, NTC Ratio (Battery Temperature), VIN, IIN, VSYSTEM, Die Temperature Coulomb Counter and Integrated 14-Bit ADC Wide Charging Input Voltage Range: 4.5V to 35V Wide Battery Voltage Range: Up to 35V Input Undervoltage Charge Current Limit Loop Maximum Power Point Tracking Optional I2C Serial Port Control Input Current Limit Prioritizes System Load Output Input and Output Ideal Diodes Provide Low Loss PowerPath™ Operation Instant-On Operation with Discharged Battery

1kHz to 33MHz Resistor Set SOT-23 Oscillator Features: One External Resistor Sets the Frequency Fast Start-Up Time: <1ms 1kHz to 33MHz Frequency Range Frequency Error ≤1.5% 5kHz to 20MHz (TA = 25°C) Frequency Error ≤2% 5kHz to 20MHz (TA = 0°C to 70°C) ±40ppm/°C Temperature Stability 0.05%/V Supply Stability 50% ±1% Duty Cycle 1kHz to 2MHz 50% ±5% Duty Cycle 2MHz to 20MHz 1mA Typical Supply Current 100Ω CMOS Output Driver Operates from a Single 2.7V to 5.5V Supply Low Profile (1mm) SOT-23 (ThinSOT™ Package) AEC-Q100 Qualified for Automotive Applications