The HMC424ALH5 is a broadband 6-bit GaAs MMIC digital attenuator housed in a hermetic SMT leadless package. Covering DC to 13 GHz, the insertion loss is less than 3.5 dB typical. The attenuator bit values are 0.5 (LSB), 1, 2, 4, 8, and 16 dB for a total attenuation of 31.5 dB. Attenuation accuracy is excellent at ?0.5 dB typical step error with an IIP3 of +34 dBm. Six control voltage inputs, toggled between 0 and -5V, are used to select each attenuation state. A single Vee bias of -5V allows operation at frequencies down to DC. The HMC424ALH5 is compatible with standard and lead free surface mount manufacturing techniques and is suitable for high reliability military, industrial and space applications.Applications Telecom Infrastructure Military Radio, Radar & ECM Space Systems Test Instrumentation

The HMC424ALP3E is a broadband, 6-bit, gallium arsenide (GaAs), digital attenuator in low cost, leadless surface-mount package with a 31.5 dB attenuation control range in 0.5 dB steps.The HMC424ALP3E offers excellent attenuation accuracy of ?(0.2 dB + 4% of attenuation state) and high input linearity with a typical insertion loss of less than 4 dB over the specified frequency range from 0.1 GHz to 13.0 GHz. The attenuator bit values are 0.5 dB (LSB), 1 dB, 2 dB, 4 dB, 8 dB, and 16 dB for a total attenuation of 31.5 dB with a ?0.5 dB typical step error.The device allows a user to program the attenuation state via six parallel control inputs toggled between 0 V and VEE.The HMC424ALP3E operates with a single negative supply voltage from ?3 V to ?5 V, and requires an external level shifter to interface with a CMOS/transistor to transistor logic (TTL) interface.The HMC424ALP3E comes in a RoHS compliant, compact, 3 mm ? 3 mm, 16-lead lead frame chip scale package (LFCSP).Applications Cellular infrastructure Microwave radios and very small aperture terminals (VSATs) Test equipment and sensors Intermediate frequency (IF) and RF designs Military and space

The HMC5805ALS6 is a GaAs pHEMT MMIC Distributed Power Amplifier which operates between DCand 40 GHz. The amplifier provides 11.5 dB of gain,29 dBm output IP3 and +24 dBm of output power at1 dB gain compression while requiring 175 mA froma +10 V supply. The HMC5805ALS6 is ideal for EW,ECM, Radar and test equipment applications. TheHMC5805ALS6 amplifier I/Os are internally matchedto 50 Ohms and the 6x6 mm SMT package is wellsuited for automated assembly techniques.Applications Test instrumentation Microwave radio and VSAT Military and space Telecom infrastructure Fiber optics

The HMC6505A is a compact gallium arsenide (GaAs),pseudomorphic (pHEMT), monolithic microwave integratedcircuit (MMIC) upconverter in a RoHS compliant package thatoperates from 5.5 GHz to 8.6 GHz. This device provides a smallsignal conversion gain of 15 dB with 22 dBc of sidebandrejection. The HMC6505A uses a variable gain amplifier (VGA)preceded by an in-phase and quadrature (I/Q) mixer that isdriven by an active local oscillator (LO). The IF1 and IF2 mixerinputs are provided, and an external 90? hybrid is needed toselect the required sideband. The I/Q mixer topology reducesthe need for filtering of unwanted sideband. The HMC6505Ais a smaller alternative to hybrid style single sideband (SSB)upconverter assemblies, and it eliminates the need for wirebonding by allowing the use of surface-mount manufacturingtechniques.The HMC6505A is available in 5 mm ? 5 mm, 32-terminalleadless chip carrier (LCC) package and operates over a ?40?Cto +85?C temperature range. An evaluation board for theHMC6505A is also available upon request. Applications Point to point and point to multipoint radios Military radars, electronic warfare (EW), and electronic intelligence (ELINT) Satellite communications Sensors

The HMC812ALC4 is an absorptive Voltage Variable Attenuator (VVA) which operates from 5 - 30 GHz and is ideal in designs where an analog DC control signal must be used to control RF signal levels over a 30 dB amplitude range. It features two shunt-type attenuators which are controlled by two analog voltages, Vctrl1 and Vctrl2. Optimum linearity performance of the attenuator is achieved by first varying Vctrl1 of the 1st attenuation stage from -5V to 0V with Vctrl2 fixed at -5V. The control voltage of the 2nd attenuation stage, Vctrl2, should then be varied from -5V to 0V, with Vctrl1 fixed at 0V. The HMC812ALC4 is housed in a RoHS compliant 4x4 mm QFN leadless ceramic package.Furthermore, if the Vctrl1 and Vctrl2 pins are connected together it is possible to achieve the full analog attenuation range with only a small degradation in input IP3 performance. Applications include AGC circuits and temperature compensation of multiple gain stages in microwave point-to-point and VSAT radios.Applications Point-to-Point Radio VSAT Radio Test Instrumentation Microwave Sensors Military, ECM & Radar

The HMC8410 is a gallium arsenide (GaAs), monolithic microwave integrated circuit (MMIC), pseudomorphic high electron mobility transistor (pHEMT), low noise wideband amplifier that operates from 0.01 GHz to 10 GHz. The HMC8410 provides a typical gain of 19.5 dB, a 1.1 dB typical noise figure, and a typical output IP3 of 33 dBm, requiring only 65 mA from a 5 V supply voltage. The saturated output power (PSAT) of up to 22.5 dBm enables the low noise amplifier (LNA) to function as a local oscillator (LO) driver for many of Analog Devices, Inc., balanced, I/Q or image rejection mixers.The HMC8410 also features inputs/outputs (I/Os) that are internally matched to 50 ?, making it ideal for surface-mounted technology (SMT)-based, high capacity microwave radio applications.The HMC8410 is housed in a RoHS-compliant, 2 mm ? 2 mm, LFCSP package.Multifunction pin names can be referenced by their relevant function only.APPLICATIONS Software defined radios Electronics warfare Radar applications

The HMC849ALP4CE is a high isolation non-reflective DC to 6 GHz GaAs pHEMT SPDT switch in a low cost leadless surface mount package. The switch is ideal for cellular/WiMAX/4G Infrastructure applications yielding up to 60 dB isolation, low 0.8 dB insertion loss and +52 dBm input IP3. Power handling is excellent up through the 5 - 6 GHz WiMAX band with the switch offering a P1dB compression point of +31 dBm. On-chip circuitry allows a single positive voltage control of 0/+3V or 0/+5V at very low DC currents. An enable input (EN) set to logic high will put the switch in an 'all off' state.APPLICATIONS Cellular/4G Infrastructure WiMAX, WiBro & Fixed Wireless Automotive Telematics Mobile Radio Test Equipment

The HMC1122 is a 6-bit digital attenuator operating from 0.1 GHz to 6 GHz with a 31.5 dB attenuation control range in 0.5 dB steps.The HMC1122 is implemented in a silicon process, offering very fast settling time, low power consumption, and high ESD robustness. The device features safe state transitions and optimized for excellent step accuracy and high linearity over frequency and temperature range. The RF input and output are internally matched to 50 ? and do not require any external matching components. The design is bidirectional; therefore, the RF input and output are interchangeable.The HMC1122 operates on a single supply ranging from 3.3 V to 5 V with no performance change due to an on-chip regulator.The device incorporates a driver that provides both serial and parallel control of the attenuator. The device also features a user-selectable power-up state and a serial output port for cascading other serial controlled components.The HMC1122 comes in a RoHS compliant, compact, 4 mm ? 4 mm LFCSP package, and is pin compatible to the HMC624A.A fully populated evaluation board is available. Applications Cellular infrastructure Microwave radios and very small aperture terminals (VSATs) Test equipment and sensors IF and RF designs

The AD74413R is a quad-channel software configurable input/output solution for building and process control applications. The AD74413R contains functionality for analog output, analog input, digital input, resistance temperature detector (RTD), and thermocouple measurements integrated into a single chip solution with a serial peripheral interface (SPI).The device features a 16-bit, ?-? analog-to-digital converter (ADC) and four configurable, 13-bit digital-to-analog converters (DACs) to provide four configurable input/output channels and a suite of diagnostic functions.?There are several modes related to the AD74413R. These modes are voltage output, current output, voltage input, externally powered current input, loop powered current input, external RTD measurement, digital input logic, and loop powered digital input.?The AD74413R contains a high accuracy 2.5 V internal reference to drive the DACs and the ADC.?Product Highlights Quad-Channel, Software Configurable Channels. Built In Diagnostics and Alert Features. Robust Architecture.?Applications? Process control Factory automation Motor drives Building control systems?

The ADF41020 frequency synthesizer can be used to implement local oscillators as high as 18 GHz in the up conversion and down conversion sections of wireless receivers and transmitters. It consists of a low noise, digital phase frequency detector (PFD), a precision charge pump, a programmable reference divider, and high frequency programmable feedback dividers (A, B, and P). A complete phase-locked loop (PLL) can be implemented if the synthesizer is used with an external loop filter and voltage controlled oscillator (VCO). The synthesizer can be used to drive external microwave VCOs via an active loop filter. Its very high bandwidth means a frequency doubler stage can be eliminated, simplifying system architecture and reducing cost. The ADF41020 is software-compatible with the existing?ADF4106/ADF4107/ADF4108 family of devices from Analog Devices, Inc. Their pinouts match very closely with the exception of the ADF41020?s single-ended RF input pin, meaning only a minor layout change is required when updating current designs.Applications Microwave point-to-point/multipoint radios Wireless infrastructure VSAT radios Test equipment Instrumentation