Single-Supply, Multichannel, 125 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 2.5 SPS to 125 kSPSChannel scan data rate of 24,845 SPS per channel (40.25 s settling)85 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedanceOn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 4.5 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 10.4 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

256 Position SPI/I2C Selectable Digital Potentiometer Features: 256-position End-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Compact MSOP-10 (3 mm × 4.9 mm) package Pin selectable SPI/I2C compatible interface Extra package address decode pin AD0 Full read/write of wiper register Power-on preset to midscale Single supply 2.7 V to 5.5 V Low temperature coefficient 45 ppm/°C Low power, IDD = 8 μA Wide operating temperature −40°C to +125°C SDO output allows multiple device daisy-chaining Evaluation board available

Low Cost, Low Power, True RMS-to-DC Converter Features: Converts an ac voltage waveform to a dc voltage and then converts to the true rms, average rectified, or absolute value 200 mV rms full-scale input range (larger inputs with input attenuator) High input impedance: 1012 Ω  Low input bias current: 25 pA maximum High accuracy: ±0.3 mV ± 0.3% of reading RMS conversion with signal crest factors up to 5 Wide power supply range: +2.8 V, −3.2 V to ±16.5 V Low power: 200 μA maximum supply current Buffered voltage output No external trims needed for specified accuracy Related device: the AD737 features a power-down control with standby current of only 25 μA; the dc output voltage is negative and the output impedance is 8 kΩ

Isolated Sigma-Delta Modulator Features: 10 MHz clock rate Second-order modulator 16 bits no missing codes ±2 LSB INL typical at 16 bits 1.5 μV/°C typical offset drift On-board digital isolator 8-lead surface-mount PDIP package with gull wing leads and 16-lead SOIC package See Data Sheet for Additional Information

16-Channel, 1 MSPS, 12-Bit ADC with Sequencer Features: Fast throughput rate: 1 MSPS Specified for VDD of 2.7 V to 5.25 V Low power at maximum throughput rates 5.4 mW maximum at 870 kSPS with 3 V supplies 12.5 mW maximum at 1 MSPS with 5 V supplies 16 (single-ended) inputs with sequencer Wide input bandwidth: 69.5 dB SNR at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface, SPI/QSPI™/MICROWIRE™/ DSP compatible Full shutdown mode: 0.5 μA maximum 28-lead TSSOP and 32-lead LFCSP packages AEC-Q100 qualified for automotive applicationsAD7490-EP supports defense and aerospace applications (AQEC standard) Download AD7490-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/12635 DSCC Drawing Number

8-Channel DAS with 16-Bit, Bipolar Input, Simultaneous Sampling ADC Features: 8/6/4 simultaneously sampled inputs True bipolar analog input ranges: ±10 V, ±5 V Pin to pin compatible with the state-of-the-art AD7606B Single 5 V analog supply and 2.3 V to 5 V VDRIVE Fully integrated data acquisition solution Analog input clamp protection Input buffer with 1 MΩ analog input impedance Second-order antialiasing analog filter On-chip accurate reference and reference buffer 16-bit ADC with 200 kSPS on all channels Oversampling capability with digital filter Flexible parallel/serial interface SPI/QSPI™/MICROWIRE™/DSP compatible Performance 7 kV ESD rating on analog input channels 95.5 dB SNR, −107 dB THD ±0.5 LSB INL, ±0.5 LSB DNL Low power: 100 mW Standby mode: 25 mW Temperature range: −40°C to +85°C 64-lead LQFP packageAD7606-EP supports defense and aerospace applications (AQEC standard) Download AD7606-EP data sheet (pdf) Military temperature range −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/18611

CMOS, 12-Bit Serial DACPORT Features: 12-Bit CMOS DAC with On-Chip Voltage Reference Output Amplifier Three Selectable Output Ranges -5 V to + 5 V, 0 V to +5 V, 0 V to +10 V Serial Interface 300 kHz DAC Update Rate Small Size: 16-Lead DIP or SOIC Nonlinearity: ±1/2 LSB Tmin to Tmax Low Power Dissipation: 100 mW Typical  

4MSPS Dual Simultaneous Sampling, 16-BIT SAR ADC, Differential Input Features: 16-bit/14-bit ADC family Dual simultaneous sampling Fully differential analog inputs 4 MSPS throughput conversion rate SNR (typical) 92.5 dB, VREF = 3.3 V external at AD7380 (16-bit) 85.4 dB, VREF = 3.3 V external at AD7381 (14-bit) 101 dB with ×16 OSR On-chip oversampling function Resolution boost function INL (maximum) 2.0 LSBs at 16-bit 1.0 LSB at 14-bit 2.5 V internal reference High speed serial interface −40°C to +125°C operation 16-lead LFCSP, 3 mm × 3 mm Wide common-mode range Alert function

+3/+5 Volt Serial-Input Micropower 12-Bit DAC Features: Micropower - 100 µA Single Supply - 2.7 V to 5.5 V Operation Compact 1.75 mm Height SO-8 Package and 1.1 mm Height TSSOP-8 Package AD7390 - 12-Bit Resolution AD7391 - 10-Bit Resolution SPI and QSPI Serial Interface Compatible with Schmitt Trigger Inputs

16-Bit, 8-Channel,250 kSPS PulSAR ADC Features: Download AD7689-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. 16-bit resolution with no missing codes 4-channel (AD7682)/8-channel (AD7689) multiplexer with choice of inputs Unipolar single-ended Differential (GND sense) Pseudobipolar Throughput: 250 kSPS INL: ±0.4 LSB typical, ±1.5 LSB maximum (±23 ppm or FSR) Dynamic range: 93.8 dB SINAD: 92.5 dB at 20 kHz THD: −100 dB at 20 kHz Analog input range: 0 V to VREF with VREF up to VDD Multiple reference types Internal selectable 2.5 V or 4.096 V External buffered (up to 4.096 V) External (up to VDD) Internal temperature sensor (TEMP) Channel sequencer, selectable 1-pole filter, busy indicator No pipeline delay, SAR architecture Single-supply 2.3 V to 5.5 V operation with 1.8 V to 5.5 V logic interface Serial interface compatible with SPI, MICROWIRE, QSPI, and DSP Power dissipation 3.5 mW at 2.5 V/200 kSPS 12.5 mW at 5 V/250 kSPS Standby current: 50 nA Low cost grade available 20-lead 4 mm × 4 mm LFCSP package 20-lead 2.4 mm × 2.4 mm WLCSP package