CMOS, 5 V/+5 V/+3 V, Triple SPDT Switch Features: ±2 V to ±6 V dual-supply operation 2 V to 12 V single-supply operation Temperature range: −40°C to +125°C  <0.2 nA leakage currents  52 Ω on resistance over full signal range  Rail-to-rail switching operation  16-lead LFCSP and TSSOP packages  Typical power consumption: <0.1 μW  TTL-/CMOS-compatible inputs  Package upgrades to 74HC4053 and MAX4053/MAX4583

24-Bit, 312 kSPS, 109 dB Sigma-Delta ADC with On-Chip Buffers and Serial Interface Features: High performance 24-bit Σ-Δ ADC 115 dB dynamic range at 78.125 kHz output data rate 109 dB dynamic range at 312.5 kHz output data rate 312.5 kHz maximum fully filtered output word rate Pin-selectable oversampling rates of 64×, 128×, and 256× Low power mode Flexible serial peripheral interface (SPI) Fully differential modulator input On-chip differential amplifier for signal buffering On-chip reference buffer Full band, low-pass, finite impulse response (FIR) filter Overrange alert pin Digital gain correction registers Power-down mode Synchronization of multiple devices via the SYNC pin Daisy chaining

2.1 Maximum On Resistance, 15 V/+12/5 V iCMOS Dual SPST Switches Features: 2.4 maximum on resistance 0.5 maximum on resistance flatness 200 mA continuous current Fully specified at +12 V, ±15 V, ±5 V No VL supply required 3 V logic-compatible inputs Rail-to-rail operation 10-lead MSOP and 10-lead, 3 mm × 3 mm LFCSP packages

500 kSPS, 2-Channel, Software-Selectable, True Bipolar Input, 12-Bit Plus Sign ADC Features: 12-bit plus sign SAR ADC True bipolar input ranges Software-selectable input ranges: ±10 V, ±5 V, ±2.5 V, 0 V to +10 V 2 analog input channels with channel sequencer Single-ended, true differential, and pseudo differential analog input capability 500 kSPS throughput rate High analog input impedance Low power: 18 mW Full power signal bandwidth: 22 MHz Internal 2.5 V reference High speed serial interface See data sheet for additional features

Keypad Decoder and I/O Expansion

Single-Supply, Rail-to-Rail, Low Power FET-Input Op Amp Features: True single-supply operation Output swings rail-to-rail Input voltage range extends below ground Single-supply capability from 5 V to 36 V Dual-supply capability from ±2.5 V to ±18 V  Excellent load drive Capacitive load drive up to 350 pF Minimum output current of 15 mA  Excellent ac performance for low power 800 μA maximum quiescent current Unity-gain bandwidth: 1.8 MHz Slew rate of 3 V/μs  Excellent dc performance 800 μV maximum input offset voltage 2 μV/°C typical offset voltage drift 25 pA maximum input bias current  Low noise: 13 nV/√Hz @ 10 kHz 

Micropower, Precision, Auto Qualified 4.096V Voltage Reference Features: Max temperature coefficient (TC) of 5ppm/ºC (B grade) Max temperature coefficient (TC) of 8 ppm/°C (A grade) Initial output voltage error: ±0.1% (maximum) Operating temperature range: −40°C to +125°C Output current: +10 mA source/−3 mA sink Low quiescent current: 100 μA (maximum) Long term drift: 30 ppm (initial 1 khr typical) Low dropout voltage: 250 mV at 2 mA Output noise (0.1 Hz to 10 Hz): 29μVp-p at 4.096V (typical) Qualified for automotive applications

DC/DC CTRL SYNC BUCK 1.5MHZ LFCSP-32; Supply Voltage Min:2.75V; Supply Voltage Max:20V; No. of Outputs:2 Output; Duty Cycle (%):50%; Controller IC Case Style:LFCSP; No. of Pins:32Pins; Switching Frequency:1.5MHz; Topology:Synchronous Buck (Step Down); Operating Temperature Min:-40°C; Operating Temperature Max:85°C; Packaging:Cut Tape; Product Range:ADP1850 Series; Automotive Qualification Standard:-; MSL:MSL 3 - 168 hours; SVHC:No SVHC (20-Jun-2016); No. of Outputs:2Outputs

Ultralow Noise, LDO XFET 3.0V Voltage Reference w/Current Sink and Source Features: Ultralow noise (0.1 Hz to 10 Hz) ADR440: 1 μV p-p ADR441: 1.2 μV p-p ADR443: 1.4 μV p-p ADR444: 1.8 μV p-p ADR445: 2.25 μV p-p Superb temperature coefficient A Grade: 10 ppm/°C B Grade: 3 ppm/°C Low dropout operation (supply voltage headroom): 500 mV Input range: (VOUT + 500 mV) to 18 V High output source and sink current +10 mA and −5 mA, respectively Wide temperature range: −40°C to +125°C

5 kV Signal Isolated, ESD Protected, 500 kbps, Full/Half Duplex RS-485 Transceiver Features: Isolated, RS-485/RS-422 transceiver, configurable as half- or full-duplex ±15 kV ESD protection on RS-485 input/output pins 500 kbps data rate Complies with ANSI TIA/EIA RS-485-A-1998 and ISO 8482: 1987(E) Suitable for 5 V or 3.3 V operation (VDD1) High common-mode transient immunity: >25 kV/μs True fail-safe receiver inputs 256 nodes on the bus Thermal shutdown protection Safety and regulatory approvals UL recognition 5000 V rms isolation voltage for 1 minute per UL1577 VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 Reinforced insulation, VIORM = 849 VPEAK CSA Component Acceptance Notice 5A IEC 60950-1: 380 V rms (reinforced) Operating temperature range: −40°C to +85°C Wide body, 16-lead SOIC package