Buck Switching Regulator IC Positive Fixed 5V 1 Output 2A 8-SOIC (0.154", 3.90mm Width) Exposed Pad

ANALOGUE MULTIPLEXER, DUAL, 8: 1, LFCSP32; Multiplexer Configuration: 8: 1; No. of Circuits: 2Circuits; On State Resistance Max: 5ohm; Supply Voltage Range: 3.3V to 16V, ± 3.3V to ± 8V; Analogue Multiplexer Case: LFCSP; No. of Pins: 32Pins; Operating Temperature Min: -40°C; Operating Temperature Max: 125°C; Product Range: -; Automotive Qualification Standard: -; RoHS Phthalates Compliant: Yes; MSL: -; SVHC: No SVHC (07-Jul-2017)

Linear Voltage Regulators 300mA LDO 3.3Vo1, 2.8Vo2

Linear Voltage Regulator IC Positive Adjustable 1 Output 500mA 8-LFCSP-UD (2x2)

16-Channel, 12-/16-BitnanoDAC+ with 2 ppm/C VoltageReference Temperature Coefficient, SPI Interface Features: High performance High relative accuracy (INL): ±4 LSB maximum at 16 bits (AD5679/AD5679R) TUE: ±0.14% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.06% of FSR maximum Low drift, 2.5 V voltage reference temperature coefficient: 2 ppm/°C typical 40 mA short-circuit current Wide operating ranges −40°C to +125°C temperature range 2.7 V to 5.5 V power supply range Simplified implementation User selectable gain of 1 or 2 (GAIN pin) 1.8 V logic compatibility 50 MHz serial peripheral interface (SPI) with readback or daisy chain 28-lead, 4 mm × 4 mm, RoHS compliant LFCSP

Dual 12-Bit nanoDAC+ with 2 ppm/C Reference, I2C Interface Features: Low drift 2.5 V reference: 2 ppm/°C typical Tiny package: 3 mm × 3 mm, 16-lead LFCSP Total unadjusted error (TUE): ±0.1% of full-scale range (FSR) maximum Offset error: ±1.5 mV maximum Gain error: ±0.1% of FSR maximum High drive capability: 20 mA, 0.5 V from supply rails User selectable gain of 1 or 2 (GAIN pin) Reset to zero scale or midscale (RSTSEL pin) 1.8 V logic compatibility Low glitch: 0.5 nV-sec 400 kHz I2C-compatible serial interface Low power: 3.3 mW at 3 V 2.7 V to 5.5 V power supply −40°C to +105°C temperature range

Multiple Range, 12-Bit, Unipolar, Voltage Output DACs Features: 8 software-programmable output ranges: 0 V to +5 V, 0 V to +10 V, 0 V to +16 V, 0 V to +20 V, ±3 V, ±5 V, ±10 V, −2.5 V to +7.5 V; 5% overrange Total unadjusted error (TUE): 0.1% FSR maximum 16-bit resolution: ±2 LSB maximum INL Guaranteed monotonicity: ±1 LSB maximum Single channel, 12-bit DACs Settling time: 7.5 μs typical Integrated reference buffers Low noise: 35 nV/√Hz Low glitch: 1 nV-sec 1.8 V logic compatibility Asynchronous updating via LDAC Asynchronous RESET to zero scale/midscale DSP/microcontroller-compatible serial interface Robust 4 kV HBM ESD rating Available in 16-lead TSSOP and 16-lead LFCSP Operating temperature range: −40°C to +125°C

Single-Channel, 16-Bit Current and Voltage Output DAC with Dynamic Power Control and HART Connectivity Features: 16-bit resolution and monotonicity DPC for thermal management Current/voltage output available on a single terminal Current output ranges: 0 mA to 20 mA, 4 mA to 20 mA, 0 mA to 24 mA, ±20 mA, ±24 mA, −1 mA to +22 mA Voltage output ranges (with 20% overrange): 0 V to 5 V, 0 V to 10 V, ±5 V, and ±10 V User-programmable offset and gain Advanced on-chip diagnostics, including a 12-bit ADC On-chip reference Robust architecture, including output fault protection EMC test standards: IEC 61000-4-6 conducted immunity (10 V, Class A) IEC 61000-4-3 radiated immunity (20 V/m, Class A) IEC 61000-4-2 ESD (±6 kV contact, Class B) IEC 61000-4-4 electrical fast transient (EFT) (±4 kV, Class B) IEC 61000-4-5 surge (±4 kV, Class B) 32-lead, 5 mm × 5 mm LFCSP −40°C to +115°C temperature range

High Precision, Impedance & Electrochemical Front End Features: Analog input 16-bit ADC with both 800 kSPS and 1.6 MSPS options Voltage, current, and impedance measurement capability Internal and external current and voltage channels Ultralow leakage switch matrix and input mux Input buffers and programmable gain amplifier Voltage DACs Dual output voltage DAC with an output range of 0.2 V to 2.4 V 12-bit VBIAS0 output to bias potentiostat 6-bit VZERO0 output to bias TIA Ultra low power: 1 µA 1 high speed, 12-bit DAC Output range to sensor: ±607 mV Programmable gain amplifier on output with gain settings of 2 and 0.05 Amplifiers, accelerators, and references 1 low power, low noise potentiostat amplifier suitable for potentiostat bias in electrochemical sensing 1 low noise, low power TIA, suitable for measuring sensor current output 50 pA to 3 mA range Programmable load and gain resistors for sensor output Analog hardware accelerators Digital waveform generator Receive filters Complex impedance measurement (DFT) engine 1 high speed TIA to handle wide bandwidth input signals from 0.015 Hz up to 200 kHz Digital waveform generator for generation of sinusoid and trapezoid waveforms 2.5 V and 1.82 V internal reference voltage sources System level power savings Fast power-up and power-down analog blocks for duty cycling Programmable AFE sequencer to minimize workload of host controller 6 kB SRAM to preprogram AFE sequences Ultra low power potentiostat channel: 6.5 µAof current consumption when powered on and all other blocks in hibernate mode Smart sensor synchronization and data collection Cycle accurate control of sensor measurement Sequencer controlled GPIOs On-chip peripherals SPI serial input/output Wake-up timer Interrupt controller Power 2.8 V to 3.6 V supply 1.82 V input/output compliant Power-on reset Hibernate mode with low power DAC and potentiostat amplifier powered up to maintain sensor bias Package and temperature range 3.6 mm × 4.2 mm, 56-ball WLCSP 7 mm × 7 mm, 48-lead LFCSP Fully specified for operating temperature range of −40°C to +85°C AD5940 and AD5941 fully specified for operating temperature range of −40°C to +85°C AD5941W fully specified for operating temperature range of −40°C to +105°C AEC-Q100 qualified for automotive applications

4-Channel, I2C, Ultralow Power 12-Bit ADC in 20-Lead LFCSP/TSSOP Features: I2C-compatible serial interface supports standard and fast modes Ultralow power: 90 μW typical at 3 V in fast mode Specified for VDD of 2.7 V to 5.25 V On-chip accurate 2.5 V reference, 5 ppm/°C typical drift 4 single-ended analog input channels ALERT function BUSY function Autocycle mode Wide input bandwidth 68 dB signal-to-noise ratio (SNR) typical at input frequency of 1 kHz Flexible power/throughput rate management No pipeline delays Power-down mode 550 nA typical at VDD = 5.25 V 435 nA typical at VDD = 3 V 20-lead LFCSP and TSSOP packages Temperature range: −40°C to +125°C