Single Supply, 24-Bit, Sigma-Delta ADC with 10 V and 0 mA to 20 mA Inputs Features: Internal or external clock Tested for robustness per: IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, CISPR 11 24-bit ADC with integrated analog front end Fast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 μs settling) 16 noise free bits at 1 kSPS per channel 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel ±10 V inputs, 4 differential or 8 single-ended Pin absolute maximum rating ±50 V Absolute input pin voltage up to ±20 V ≥1 MΩ impedance ±0.06% accuracy at 25°C 0 mA to 20 mA inputs, 4 single-ended Pin absolute maximum rating ±50 mA Input range from −0.5 mA to +24 mA 60 Ω impedance ±0.08% accuracy at 25°C On-chip 2.5 V reference ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift Power supplies AVDD = 3.0 V to 5.5 V IOVDD = 2 V to 5.5 V Total IDD = 3.9 mA Temperature range: −40°C to +105°C 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK) SPI, QSPI, MICROWIRE, and DSP compatible

16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Features: Easy Drive Reduced analog input and reference drive requirements On-chip reference buffer (WLCSP only) Overvoltage protection up to 5 mA on each analog input Long acquisition phase, ≥71.5% (715 ns/1000 ns) of cycle time at 1 MSPS High performance Sample rate: 500 kSPS (AD4695) or 1 MSPS (AD4696) INL: ±1.0 LSB maximum Guaranteed 16-bit, no missing codes SINAD: 93 dB typical, fIN = 1 kHz Oversampled dynamic range: 111.2 dB, OSR = 64 Small footprint, high channel density 32-lead 5 mm × 5 mm LFCSP 36-ball 2.96 mm × 2.96 mm WLCSP Easy Drive features support system level designs with fewer components Enhanced digital functionality First conversion accurate, no latency or pipeline delay Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates Customizable channel sequencer On-chip oversampling and decimation Threshold detection alerts Offset and gain correction Autonomous conversion (autocycle) mode 1.14 V to 1.98 V logic SPI Low power 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS 4 μW standby power dissipation with the internal LDO disabled Internal LDO enables 3.15 V to 5.5 V, single analog supply operation Wide operating temperature range: −40°C to +125°C

Quad Channel, 256-Position, I2C / SPI, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Independent logic supply: 1.8 V to 5.5 V Wide operating temperature: −40°C to +125°C 4 mm × 4 mm package optionAD5144-EP Supports defense and aerospace applications (AQEC standard) Download AD5144-EP data sheet (PDF) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/20603

256-Position Dual Channel SPI Digital Potentiometer Features: 2-Channel, 256-position potentiometer End-to-End Resistance  2.5kΩ, 10kΩ, 50kΩ, 100kΩ Compact 10-lead MSOP (3 mm x 4.9 mm) package Fast settling time: ts = 5 μs typical on power-up Full read/write of wiper register Power-On preset to midscale Single Supply: 2.7 V to 5.5 V Low Temperature  Coefficient 35 ppm/°C Low power, IDD = 6 µA maximum Wide operating temperature: –40°C to +125°C Evaluation board available Qualified for automotive applications

Dual, Increment/Decrement Digital Potentiometer Features: 128 Position Potentiometer Replacement 10K, 50K, 100K, 1M Ohm Very Low Power - 40 µA Max Increment/Decrement Count Control +3 to +5V Single-Supply;  Or ±2.7V Dual-Supply Operation Internal Power ON Mid-Scale Preset

Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer Features: Nonvolatile memory maintains wiper settings  64-position digital potentiometer  Compact MSOP-10 (3 mm × 4.9 mm)  I2C-compatible interface VLOGIC pin provides increased interface flexibility  End-to-end resistance 1 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Resistance tolerance stored in EEPROM (0.1% accuracy) Power-on EEPROM refresh time <1 ms Software write protect command  Address Decode Pin AD0 and Address Decode Pin AD1 allow four packages per bus  100-year typical data retention at 55°C  Wide operating temperature −40°C to +85°C 

2.5 V to 5.5 V, 120 A, 2-Wire Interface, Voltage-Output 12-Bit DAC Features: Buffered voltage output 12-bit DAC 6-lead SOT-23 and 8-lead MSOP packages Micropower operation: 120 μA at 3 V 2-wire (I2C-compatible) serial interface Data readback capability 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Power-down to 50 nA at 3 V Reference derived from power supply Power-on reset to 0 V On-chip rail-to-rail output buffer amplifier 3 power-down functions

2.5 V to 5.5 V, 250 A, 2-Wire Interface, Dual Voltage Output,12-Bit DACs Features: AD5337: 2 buffered 8-bit DACs in 8-lead MSOP AD5338, AD5338-1: 2 buffered 10-bit DACs in 8-lead MSOP AD5339: 2 buffered 12-bit DACs in 8-lead MSOP Low power operation: 250 μA @ 3 V, 300 μA @ 5 V 2-wire (I2C-compatible) serial interface 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes See datasheet for additional features

16-Channel, 16-Bit, Serial Input, Voltage-Output DAC Features: 16-channel DAC in 52-lead LQFP package Guaranteed monotonic to 16/14 bits Nominal output voltage range of −10 V to +10 V Multiple output spans available Temperature monitoring function Channel monitoring multiplexer Digital reset (RESET) See Data Sheet for Additional Information

16-Channel, 14-Bit, Serial Input, Voltage-Output DAC Features: 16-channel DAC in 52-lead LQFP package Guaranteed monotonic to 16/14 bits Nominal output voltage range of −10 V to +10 V Multiple output spans available Temperature monitoring function Channel monitoring multiplexer Digital reset (RESET) Clear function to user-defined SIGGNDx GPIO function System calibration function allowing user-programmable offset and gain Channel grouping and addressing features Data error checking feature SPI-compatible serial interface 2.5 V to 5.5 V digital interface Simultaneous update of DAC outputs