Analog Comparators Ultra Fast ECL Single Comparator

The AD96685 and AD96687 are ultrafast voltage comparators. The AD96685 is a single comparator with a propagation delay of 2.5 ns, while the AD96687 is an equally fast dual comparator. Both devices exhibit a propagation delay dispersion of 50 ps, a crucial characteristic for high-speed comparators, indicating the difference in propagation delay under varying overdrive conditions.

Featuring a fast, high-precision differential input stage, these comparators maintain consistent propagation delay across a broad range of signals within the common-mode range from -2.5 V to +5 V. The outputs consist of complementary digital signals fully compatible with ECL 10 K and 10 KH logic families. These outputs provide ample drive current to directly interface with transmission lines terminated in 50 Ohms to -2 V. The inclusion of a level-sensitive latch input allows for tracking, track-hold, or sample-hold modes of operation.

Both the AD96685 and AD96687 are available in industrial temperature ranges (-25°C to +85°C) and military temperature ranges. Industrial range devices are offered in 16-pin DIP, SOIC, and 20-lead PLCC packages. Additionally, the AD96685 is available in a 10-pin TO-100 metal can.

Features and Benefits:

• Fast: 2.5 ns Propagation Delay
• Low Power: 118 mW per Comparator
• Packages: DIP, SOIC, PLCC
• Power Supplies: +5 V, –5.2 V
• Logic Compatibility: ECL
• 50 ps Delay Dispersion

Applications:

• High Speed Triggers
• High Speed Line Receivers
• Threshold Detectors
• Window Comparators
• Peak Detectors

J-FET Amplifier 1 Circuit 8-LFCSP (3x3)

Nonvolatile, I2C-Compatible 64-Position, Digital Potentiometer Features: Nonvolatile memory maintains wiper settings  64-position digital potentiometer  Compact MSOP-10 (3 mm × 4.9 mm)  I2C-compatible interface VLOGIC pin provides increased interface flexibility  End-to-end resistance 1 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Resistance tolerance stored in EEPROM (0.1% accuracy) Power-on EEPROM refresh time <1 ms Software write protect command  Address Decode Pin AD0 and Address Decode Pin AD1 allow four packages per bus  100-year typical data retention at 55°C  Wide operating temperature −40°C to +85°C 

Multiplexer Switch ICs DUAL 4 CHANNEL MUX.

Dual 12-Bit nanoDAC with 5 ppm/C On-Chip Reference Features: Low power, smallest pin-compatible, dual nanoDAC AD5663R: 16 bits AD5643R: 14 bits AD5623R: 12 bits User-selectable external or internal reference External reference default On-chip 1.25 V/2.5 V, 5 ppm/°C reference 10-lead MSOP and 3 mm × 3 mm LFCSP 2.7 V to 5.5 V power supply Guaranteed monotonic by design See data sheet for additional featuresAD5623R-EP supports defense and aerospace applications (AQEC standard) Download AD5623R-EP Data Sheet (pdf) Extended temperature range: −55°C to +105°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/14633-01XE DSCC Drawing Number

1/1 Transceiver Half RS485 8-SOIC

Low Cost, High Speed, Rail-to-Rail Amplifier Features: High speed and fast settling on 5 V 110 MHz, −3 dB bandwidth (G = +1) (AD8051/AD8052) 150 MHz, −3 dB bandwidth (G = +1) (AD8054) 145 V/μs slew rate 50 ns settling time to 0.1% Single-supply operation Output swings to within 25 mV of either rail Input voltage range: −0.2 V to +4 V; VS = 5 V Video specifications (G = +2) 0.1 dB gain flatness: 20 MHz; RL = 150 Ω Differential gain/phase: 0.03%/0.03° Low distortion −80 dBc total harmonic @ 1 MHz, RL = 100 Ω Outstanding load drive capability Drives 45 mA, 0.5 V from supply rails (AD8051/AD8052) Drives 50 pF capacitive load (G = +1) (AD8051/AD8052) Low power: 2.75 mA/amplifier (AD8054) Low power: 4.4 mA/amplifier (AD8051/AD8052)

LDO Voltage Regulators PADM1270ACPZ-R7DO 1.3Vo

Supervisory Circuits RESET GENERATOR I.C.

Supervisory Circuits RESET GENERATOR I.C.