IC Digital Coupler SOP 16PIN PLASTIC

Hot Swap Controller and I2C Power Monitor Features: Allows safe board insertion and removal from a live backplane  Controls supply voltages from 3.15 V to 16.5 V  Precision current sense amplifier  Precision voltage input  12-bit ADC for current and voltage readback  Charge pumped gate drive for external N-channel FET  I2C fast mode-compliant interface (400 kHz maximum) Adjustable analog current limit with circuit breaker  ±3% accurate hot swap current limit level  Fast response limits peak fault current  Automatic retry or latch-off on current fault  Programmable hot swap timing via TIMER pin  Active-high ON pin  2 address pins allow 16 devices on the same bus 10-lead MSOP

800 MHz, Linear-in-dB VGA with AGC Detector Features: Analog variable gain range: −12 dB to +22 dB Linear-in-dB scaling: 37.5 dB/V 3 dB bandwidth: 800 MHz @ VGAIN = 0.5 V Integrated rms detector P1dB: 16 dBm @ 140 MHz Output IP3: 33 dBm @ 140 MHz Noise figure at maximum gain: 9.5 dB @ 140 MHz Input and output impedances: 50 Ω Single-supply voltage from 4.5 V to 5.5 V RoHS-compliant, 24-lead LFCSP

Fully Accurate, Quad, 16-Bit, Buffered VOUT, 4.5 V to 5.5 V nanoDAC with SPI Interface Features: Low power quad 12-/14-/16-bit DAC, ±1 LSB INL Pin compatible and performance upgrade to AD5666 Individual and common voltage reference pin options Rail-to-rail operation 4.5 V to 5.5 V power supply Power-on reset to zero scale or midscale 3 power-down functions and per-channel power-down Hardware LDAC with software LDAC override function CLR function to programmable code SDO daisy-chaining option 14-/16-lead TSSOP Internal reference buffer and internal output amplifier 

Differential/Single-Ended Input, Dual, Simultaneous Sampling, 2 MSPS, 12-Bit, 3-Channel SAR A/D Converter Features: Dual 12-bit, 3-channel ADC Throughput rate: 2 MSPS Specified for VDD of 2.7 V to 5.25 V Power consumption: 9 mW at 1.5 MSPS with 3 V supplies 27 mW at 2 MSPS with 5 V supplies Pin-configurable analog inputs 12-channel single-ended inputs 6-channel fully differential inputs 6-channel pseudo differential inputs 70 dB SNR at 50 kHz input frequency Accurate on-chip reference: 2.5 V ±0.2% maximum @ 25°C, 20 ppm/°C maximum Dual conversion with read 437.5 ns, 32 MHz SCLK High speed serial interface SPI®-/QSPI™-/MICROWIRE&trade-/DSP-compatible −40°C to +125°C operation Shutdown mode: 1 μA maximum 32-lead LFCSP and 32-lead TQFP 1 MSPS version, AD7265

10-Bit, 4 Oversampling SDTV Video Decoder Features: Automotive versions qualified per AEC-Q100, Grade 1 Worldwide NTSC/PAL/SECAM color demodulation support One 10-bit ADC, 4× oversampling for CVBS, 2× oversampling for Y/C mode, and 2× oversampling for YPrPb (per channel) 3 video input channels with on-chip antialiasing filter CVBS (composite), Y/C (S-video), and YPrPb (component) video input support 5-line adaptive comb filters and CTI/DNR video enhancement Adaptive Digital Line Length Tracking (ADLLT), signal processing, and enhanced FIFO management give mini-TBC functionality See data sheet for additional features

CMOS Low Voltage 2.5 Quad SPST Switch Features: 1.8 V to 5.5 V Single Supply 2.5 O (Typ) On Resistance Low On-Resistance Flatness -3 dB Bandwidth >200 MHz Rail-to-Rail Operation 16-Lead TSSOP/SOIC packages Fast Switching Times  tON 16 ns tOFF 10 ns Typical Power Consumption (<0.01 µW ) TTL/CMOS Compatible

Complete Quad, 16-Bit, High Accuracy, Serial Input, Bipolar Voltage Output DAC Features: Complete quad, 16-bit digital-to-analog converters (DAC) Programmable output range: ±10 V, ±10.2564 V, or ±10.5263 V ±1 LSB max INL error, ±1 LSB maximum DNL error Low noise: 60 nV/√Hz Settling time: 10 µs maximum Integrated reference buffers Internal reference: 10 ppm/°C maximum On-chip die temperature sensor Output control during power-up/brownout Programmable short-circuit protection Simultaneous updating via LDAC Asynchronous CLR to zero code Digital offset and gain adjust See Data Sheet for Additional Information

IC Operational Amplifier DUAL CMOS SOP 8PIN PLASTIC

Zero Drift, Single-Supply, R/R, Input/Output Operational Amplifier Features: Lowest auto-zero amplifier noise Low offset voltage: 1 μV Input offset drift: 0.002 μV/°C Rail-to-rail input and output swing 5 V single-supply operation High gain, CMRR, and PSRR: 130 dB Very low input bias current: 100 pA maximum Low supply current: 1.0 mA Overload recovery time: 50 μs No external components required Qualified for automotive applicationsAD8629-EP supports defense and aerospace applications (AQEC standard) Download AD8629-EP Data Sheet (pdf) Extended temperature range: −55°C to +125°C Controlled manufacturing baseline One assembly/test site One fabrication site Enhanced product change notification Qualification data available on request V62/15607 DSCC Drawing Number