Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

5.5 GHz to 18 GHz, GaAs, pHEMT, MMIC, Medium Power Amplifier Features: High saturated output power: 26 dBm with 24% PAE  High gain: 24 dB typical High output IP3: 36 dBm typical High output P1dB: 25.5 dBm Die size: 2.19 mm × 1.05 × 0.1 mm

Medium Power Amplifier SMT, 12 - 30 GHz Features: Gain: 15 dB Saturated Output Power: +18 dBm Output IP3: +25 dBm Single Positive Supply: +5V @ 100 mA 50 Ohm Matched Input/Output RoHS Compliant 4x4 mm Package

40W SPDT Failsafe Switch SMT, 0.1 - 2.1 GHz Features: High Input P0.1dB: +46 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +74 dBm Single Positive Control: 0/ +3V to 0/ +8V Failsafe Operation; Tx 'On' when Unpowered 2 × 2mm DFN SMT Package

Constant-Current/Constant-Voltage 1.4MHz Step-Up DC/DC Converter Features: Accurate Input/Output Current Control: ±5% Over Temperature Accurate Output Voltage Control: ±1% Wide VIN Range: 1.6V to 18V 1.4MHz Switching Frequency High Output Voltage: Up to 35V Low VCESAT Switch: 200mV at 1A Available in (3mm x 3mm x 0.8mm) 10-Pin DFN and 10-Pin MSOP Packages

SmartMesh IP Wireless 802.15.4e System-on-Chip Features: 72-pin 10mm × 10mm QFN package 2.4 GHz, IEEE 802.15.4e System-on-Chip, Complete with Embedded SmartMesh Networking Software >99.999% Network Reliability in the Most Challenging RF Environments Sub 50µA Routing Nodes Serves as either a Wireless Mote, EManager, or Access Point Mote in a SmartMesh IP network These products contain encryption. Import/export restrictions may apply.

Low Noise, Low Distortion Fully Differential Input/Output Amplifier/Driver Features: Fully Differential Input and Output Wide Supply Range: 2.375V to 12.6V Rail-to-Rail Output Swing Low Noise: 3nV/√Hz Low Distortion, 2VP-P, 1MHz: –94dBc Adjustable Output Common Mode Voltage Unity Gain Stable Gain-Bandwidth: 70MHz Slew Rate: 65V/μs Large Output Current: 85mA DC Voltage Offset <2mV MAX Open-Loop Gain: 100V/mV Low Power Shutdown 8-Pin MSOP or 3mm × 3mm DFN Package

No RSENSE Current Mode Boost DC/DC Controller Features: No Current Sense Resistor Required VOUT up to 60V Constant Frequency 550kHz Operation Internal Soft-Start and Optional External Soft-Start Adjustable Current Limit Pulse Skipping at Light Load VIN Range: 2.75V to 9.8V ±1.5% Voltage Reference Accuracy Current Mode Operation for Excellent Line and Load Transient Response Low Profile (1mm) SOT-23 and 2mm × 3mm DFN Packages

GaAs MMIC SP4T Non-Reflective Switch, DC - 3.5 GHz Features: RoHS Compliant Product Low Insertion Loss (2 GHz): 0.7 dB Single Positive Supply: VDD = +5V Integrated 2:4 TTL Decoder 16 Lead QSOP Package

10 W (40 dBm), 0.01 GHz to 2.8 GHz, GaN Power Amplifier Features: High small signal gain: 15.0 dB typical POUT: 40 dBm typical at PIN = 30 dBm High PAE: 55% typical at PIN = 30 dBm Frequency range: 0.01 GHz to 2.8 GHz across all frequencies VDD = 28 V at quiescent current of 100 mA Internal prematching Simple and compact external tuning for optimal performance 5 mm × 5 mm, 32-lead LFCSP package