Low IQ Boost/SEPIC/Inverting Converter with 3A, 40V Switch Features: Wide Input Voltage Range: 2.8V to 40V Ultralow Quiescent Current and Low Ripple Burst Mode® Operation: IQ = 9μA 3A, 40V Power Switch Positive or Negative Output Voltage Programming with a Single Feedback Pin Programmable Frequency (300kHz to 2MHz) Synchronizable to an External Clock Spread Spectrum Frequency Modulation for Low EMI Bias Pin for Higher Efficiency Programmable Undervoltage Lockout (UVLO) Overcurrent and Overtemperature Protection Thermally Enhanced 10-Lead 3mm × 3mm DFN Package

60V, 3A Synchronous Step-Down LED Driver with Silent Switcher Features: ±1.5% LED Current Regulation ±2% Output Voltage Regulation 5000:1 PWM Dimming at 100Hz 128:1 Internal PWM Dimming Spread-Spectrum Frequency Modulation Silent Switcher® Architecture for Low EMI 3.6V to 60V Input Voltage Range 0V to 60V LED String Voltage 3A, 60V Internal Switches 200kHz to 2MHz with SYNC Function 99.9% Maximum Duty Cycle 20:1 Analog or Duty Cycle LED Current Control Open/Short LED Protection and Fault Indication Accurate LED Current Sense with Monitor Output Programmable UVLO Thermally Enhanced 28-Lead (4mm × 5mm) LQFN

Quad 10A Supply Current, Low IB, Zero-Drift Operational Amplifier Features: Low Supply Current: 10μA Maximum (per Amplifier) Offset Voltage: 5μV Maximum Offset Voltage Drift: 0.02μV/°C Maximum Input Bias Current: 5pA Typical 50pA Maximum, –40°C to 85°C 150pA Maximum, –40°C to 125°C Integrated EMI Filter (90dB Rejection at 1.8GHz) Shutdown Current: 170nA Maximum (per Amplifier) Rail-to-Rail Input and Output 1.7V to 5.25V Operating Supply Range AVOL: 140dB Typical Low-Charge Power-Up for Duty Cycled Applications Specified Temperature Ranges: –40°C to 85°C –40°C to 125°C SC70, TSOT23, MS8, DFN10, TSSOP14 and QFN16 Packages

1nV/Hz 420MHz GBW, 180V/s, Low Distortion Rail-to-Rail Output Op Amps Features: Ultra Low Voltage Noise: 1nV/√Hz Low Distortion: HD2/HD3<–90dBC at 4VP-P,1MHz into 1kΩ High Slew Rate: 180V/μs GBW = 420MHz –3dB Frequency (AV = +1): 330MHz n Input Common Mode Range Includes Negative Rail Output Swings Rail-to-Rail Supply Current: 5.5mA/Channel Typ Operating Supply Range: 2.8V to 11.75V Input Offset Voltage: 95μV Max Offset Drift :0.4μV/°C Low Power Shutdown Very High Open Loop Gain: 9V/μV (139dB), RL = 1kΩ Operating Temp Range: –40°C to 125°C Single in 8-Lead SOIC, TSOT-23, 2mm × 2mm DFN. Duals in 3mm × 3mm DFN, MS8E

High Temperature, 16-Bit, 600 kSPS PulSAR ADC Features: Download AD7981-KGD Data Sheet. Available as Known Good Die and fully guaranteed to data sheet specifications. Extreme high temperature operation Specified temperature range −55°C to +210°C (10-lead FLATPACK) −55°C to +175°C (10-Lead MSOP) High performance Pseudo differential analog input range 0 V to VREF with VREF between 2.4 V and 5.1 V Throughput: 600 kSPS Zero latency architecture 16-bit resolution with no missing codes INL: ±2.5 LSB maximum, DNL: ±0.9 LSB maximum Dynamic range: 92 dB, VREF = 5 V SNR: 91 dB at fIN = 1 kHz, VREF = 5 V THD: −102 dB at fIN = 1 kHz, VREF = 5 V SINAD: 90.5 dB at fIN = 1 kHz, VREF = 5 V Low power dissipation Single-supply 2.5 V operation with 1.8 V to 5 V logic interface 2.25 mW typical at 600 kSPS (VDD only) 4.65 mW typical at 600 kSPS (total) 75 μW typical at 10 kSPS Proprietary serial interface SPI-/QSPI-/MICROWIRE-/DSP-compatible Daisy-chain multiple ADCs and busy indicator Small footprint 10-lead, 3 mm × 3 mm, monometallic wire bonding MSOP 110-lead, 0.255 inches × 0.255 inches, monometallic wire bonding FLATPACK

Up to 1GHz SHARC+ DSP with 640KB L1, 1024KB Shared L2 SRAM, 400-Ball CSP_BGA Features:SHARC+ Core infrastructure 800MHz (max) or 1GHz (max) Core clock frequency 640KB on-chip Level 1 (L1) SRAM memory (with parity) increases low latency performance 32-bit, 40-bit & 64-bit floating point support 32-bit fixed point Byte, short-word, word, long-word addressedMemory 1024KB on-chip Level 2 (L2) SRAM with ECC protection - eliminates need for external memory in many use cases One Level 3 (L3) interface optimized for low system power, providing 16-bit interface to DDR3 (supporting 1.35 V capable DDR3L devices) SDRAM devices16-bit DDR/DDR3L Memory Controller 1.35V support for DDR3LAdvanced Hardware Accelerators Enhanced FIR/IIR offload engines running at Core clock frequency for added processing power Security Crypto Engines with OTPPowerful DMA SystemInnovative Digital Audio Interface (DAI) includes: 8x Full SPORT interfaces w/TDM & I2S modes 2x S/PDIF Rx/Tx, 8 ASRC pairs 4x Precision Clock Generators 28 BuffersOther Peripheral Connectivity / Interfaces: 2x Quad SPI, 1x Octal SPI MLB 3-pin 6x I2C,3x UARTs 2x Link Ports 10x General Purpose Timer, 1x General Purpose Counter 2x Watchdog Timers 4-ch 12bit Housekeeping ADCs 40 GPIO pins, 28 DAI pins Thermal SensorPackage 17mm x 17mm (0.8mm pitch) 400-ball CSP_BGAAdditional Features Security and Protection Crypto hardware accelerators Fast secure boot with IP protection Enhanced FIR and IIR accelerators running up to 1 GHz AEC-Q100 qualified for automotive applications

5.5 GHz to 18 GHz, GaAs, pHEMT, MMIC, Medium Power Amplifier Features: High saturated output power: 26 dBm with 24% PAE  High gain: 24 dB typical High output IP3: 36 dBm typical High output P1dB: 25.5 dBm Die size: 2.19 mm × 1.05 × 0.1 mm

Low Noise, Low Distortion Fully Differential Input/Output Amplifier/Driver Features: Fully Differential Input and Output Wide Supply Range: 2.375V to 12.6V Rail-to-Rail Output Swing Low Noise: 3nV/√Hz Low Distortion, 2VP-P, 1MHz: –94dBc Adjustable Output Common Mode Voltage Unity Gain Stable Gain-Bandwidth: 70MHz Slew Rate: 65V/μs Large Output Current: 85mA DC Voltage Offset <2mV MAX Open-Loop Gain: 100V/mV Low Power Shutdown 8-Pin MSOP or 3mm × 3mm DFN Package

No RSENSE Current Mode Boost DC/DC Controller Features: No Current Sense Resistor Required VOUT up to 60V Constant Frequency 550kHz Operation Internal Soft-Start and Optional External Soft-Start Adjustable Current Limit Pulse Skipping at Light Load VIN Range: 2.75V to 9.8V ±1.5% Voltage Reference Accuracy Current Mode Operation for Excellent Line and Load Transient Response Low Profile (1mm) SOT-23 and 2mm × 3mm DFN Packages

GaAs MMIC SP4T Non-Reflective Switch, DC - 3.5 GHz Features: RoHS Compliant Product Low Insertion Loss (2 GHz): 0.7 dB Single Positive Supply: VDD = +5V Integrated 2:4 TTL Decoder 16 Lead QSOP Package