Analogue & Digital Crosspoint ICs TQFP 250MHz 16x8 G=+1 Buf Vid XPoint Sw.

High Performance Video Op Amp Features: High speed 140 MHz bandwidth (3 dB, G = +1) 120 MHz bandwidth (3 dB, G = +2) 35 MHz bandwidth (0.1 dB, G = + 2) 2500 V/µs slew rate 25 ns settling time to 0.1% (for a 2 V step) 65 ns settling time to 0.01% (for a 10 V step) Excellent dc precision 3 mV max input offfset voltage Low distortion: THD = -74 dB @ 10 MHz Excellent video performance (RL = 150 Ω) 0.01% differential gain, 0.01° differential phase Voltage noise of 1.9 nV/√Hz Flexible Operation Specified for ±5 V and ±15 V operation ±2.3 V output swing into a 75 Ω Load (VS = ±5 V)

Accelerometers Micropower, 3-Axis, 200 g Digital Output, MEMS

Linear Voltage Regulator IC Positive Fixed 1 Output 300mA TSOT-23-5

Analog to Digital Converters - ADC 8-Bit 250 Msps ADC CMOS Output

High Speed Operational Amplifiers VLTG-FDBK,G = 1 CLAMP AMP

Phase Locked Loops - PLL IC VHF PHCOMP AD9901 IC

Digital Potentiometer ICs OTP 8-Bit I2C DigiPOT

20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator Features: Low noise: 11 μV rms independent of fixed output voltage PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V Input voltage range: 2.7 V to 20 V Maximum output current: 200 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −1.2% to +1.5%, TJ = −40°C to +85°C ±1.8%, TJ = −40°C to +125°C Low dropout voltage: 200 mV (typical) at a 200 mA load,  VOUT = 5 V User programmable soft start (LFCSP and SOIC only) Low quiescent current, IGND = 50 μA (typical) with no load Low shutdown current: 1.8 μA at VIN = 5 V, 3.0 μA at VIN = 20 V Stable with a small 2.2 μF ceramic output capacitor Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.0 V 16 standard voltages between 1.2 V and 5.0 V are available Adjustable output from 1.2 V to VIN – VDO, output can be adjusted above initial set point Precision enable 2 mm × 2 mm, 6-lead LFCSP, 8-Lead SOIC, 5-Lead TSOT AEC-Q100 qualified for automotive applications

Four ADC, Two DAC, Low Power Codec with Audio DSPs Features: Programmable FastDSP audio processing engine Up to 768 kHz sample rate Biquad filters, limiters, volume controls, mixing 28-bit SigmaDSP audio processing core Visually programmable using SigmaStudio Up to 50 MIPS performance Low latency, 24-bit ADCs and DACs 96 dB SNR (signal through PGA and ADC with A-weighted filter) 105 dB combined SNR (signal through DAC and headphone with A-weighted filter) Serial port fSYNC frequency from 8 kHz to 768 kHz 5 μs group delay (fS = 768 kHz) analog in to analog out with FastDSP bypass (zero instructions) 4 single-ended analog inputs, configurable as microphone or line inputs 8 digital microphone inputs 2 analog differential audio outputs, configurable as either line output or headphone driver PLL supporting any input clock rate from 30 kHz to 27 MHz Full-duplex, 4-channel ASRCs 2, 16-channel serial audio ports supporting I2S, left justified, or up to TDM16 8 interpolators and 8 decimators with flexible routing Power supplies Analog AVDD at 1.8 V typical Digital I/O IOVDD at 1.1 V to 1.98 V Digital DVDD at 0.9 V typical Low power (11.079 mW for typical stereo ANC settings) I2C and SPI control interfaces, self boot from I2C EEPROM Flexible GPIO 42-ball, 0.35 mm pitch, 2.695 mm × 2.320 mm WLCSP