Dual, Simultaneous Sampling, 16-Bit, 4 MSPS, SAR ADCs, Pseudo Differential Input Features: Dual 16-bit/14-bit ADC family Dual simultaneous sampling Pseudo differential analog inputs 4 MSPS throughput conversion rate SNR (typical) 87.5 dB, VREF = 3.3 V external for 16-bit AD7383 83.5 dB, VREF = 3.3 V external for 14-bit AD7384 93.4 dB with RES = 1 and OSR = 8 On-chip oversampling function Resolution boost function INL error (maximum) 2.5 LSBs for 16-bit AD7383 1.0 LSB for 14-bit AD7384 2.5 V internal reference High speed serial interface 40C to +125C operation 16-lead LFCSP, 3 mm 3 mm Alert function

4-Channel, 4 MSPS, 16-Bit Dual Simultaneous Sampling SAR ADC Features: 16-bit, 14-bit, or 12-bit dual simultaneous sampling SAR ADC Single-ended analog inputs 4-channel with 2:1 multiplexers Channel sequencer mode High throughput rate of up to 4 MSPS SNR (typical) 87.5 dB (AD7386), VREF = 3.3 V external 84 dB (AD7387), VREF = 3.3 V external 73.8 dB (AD7388) 93 dB with OSR = 8, VREF = 2.5 V internal (AD7386) On-chip oversampling functions INL (typical) ±1.5 LSB (AD7386) ±0.5 LSB (AD7387) ±0.2 LSB (AD7388) Resolution boost function 2.5 V internal reference at 10 ppm/°C (maximum) Alert function −40°C to +125°C temperature range 16-lead, 3 mm × 3 mm LFCSP

Dual 600 MHz, 50 mW Current Feedback Amplifier Features: Excellent video specifications (RL = 150 Ω, G = +2) Gain flatness: 0.1 dB to 60 MHz Differential gain error: 0.01% Differential phase error: 0.02° Low power Maximum power supply current (50 mW): 5.0 mA/amp High speed and fast settling −3 dB bandwidth (G = +1): 600 MHz −3 dB bandwidth (G = +2): 500 MHz Slew rate: 1200 V/μs Settling time to 0.1%: 16 ns Low distortion THD at fC = 5 MHz: −65 dBc Third-order intercept at f1 = 10 MHz: 33 dBm SFDR at f = 5 MHz: −66 dB Crosstalk at f = 5 MHz: −60 dB High output drive Over 70 mA output current Drives up to eight back terminated 75 Ω loads (four loads/side) while maintaining good differential gain/phase performance (0.01%/0.17°) Available in 8-lead SOIC and MSOP packages

Low Cost, High Speed Rail-to-Rail Amplifier (Dual) Features:Low cost single (AD8091) and dual (AD8092) amplifiers Fully specified at +3 V, +5 V, and 5 V supplies Single-supply operation Output swings to within 25 mV of either rail High speed and fast settling on 5 V110 MHz, 3 dB bandwidth (G = +1)145 V/s slew rate50 ns settling time to 0.1% Good video specifications (G = +2)Gain flatness of 0.1 dB to 20 MHz; RL = 150 0.03% differential gain error; RL = 1 k0.03%differential phase error; RL = 1 kLow distortion 80 dBc total harmonic @ 1 MHz; RL = 100 Outstanding load drive capabilityDrives 45 mA, 0.5 V from supply railsDrives 50 pF capacitive load (G = +1) Low power of 4.4 mA per amplifier

Single-Supply, Low Cost Instrumentation Amplifier Features:Gain set with 1 resistor per amplifierGain = 5 to 1000InputsVoltage range to 150 mV below negative rail25 nA maximum input bias current30 nV/Hz, RTI noise @ 1 kHzPower suppliesDual supply: 2V to 12Single supply: 3V to 24V500 A maximum supply current

Single-Supply, Low Cost Instrumentation Amplifier Features:Gain set with 1 resistor per amplifierGain = 5 to 1000InputsVoltage range to 150 mV below negative rail25 nA maximum input bias current30 nV/Hz, RTI noise @ 1 kHzPower suppliesDual supply: 2V to 12Single supply: 3V to 24V500 A maximum supply current

DC-to-2.5 GHz High IP3 Active Mixer Features: High-performance active mixer Broadband operation to 2.5 GHz Conversion gain: 7 dB Input IP3: 16.5 dBm LO drive: –10 dBm Noise figure: 14 dB Input P1dB: 2.8 dBm See datasheet for additional features

STEPPER MOTOR, 2-PH, 0.67A, 12N-CM; Coil Type:Bipolar; Torque Max:12N-cm; Current Rating:670mA; No. of Phases:Two Phase; Resistance:9.2ohm; Inductance:7.2mH; Inertia:18g-cm²; Product Range:PANdrive Series; SVHC:No SVHC (27-Jun-2018)

16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Features: Easy Drive Reduced analog input and reference drive requirements On-chip reference buffer (WLCSP only) Overvoltage protection up to 5 mA on each analog input Long acquisition phase, ≥71.5% (715 ns/1000 ns) of cycle time at 1 MSPS High performance Sample rate: 500 kSPS (AD4695) or 1 MSPS (AD4696) INL: ±1.0 LSB maximum Guaranteed 16-bit, no missing codes SINAD: 93 dB typical, fIN = 1 kHz Oversampled dynamic range: 111.2 dB, OSR = 64 Small footprint, high channel density 32-lead 5 mm × 5 mm LFCSP 36-ball 2.96 mm × 2.96 mm WLCSP Easy Drive features support system level designs with fewer components Enhanced digital functionality First conversion accurate, no latency or pipeline delay Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates Customizable channel sequencer On-chip oversampling and decimation Threshold detection alerts Offset and gain correction Autonomous conversion (autocycle) mode 1.14 V to 1.98 V logic SPI Low power 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS 4 μW standby power dissipation with the internal LDO disabled Internal LDO enables 3.15 V to 5.5 V, single analog supply operation Wide operating temperature range: −40°C to +125°C

256 Position SPI/I2C Selectable Digital Potentiometer Features: 256-position End-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Compact MSOP-10 (3 mm × 4.9 mm) package Pin selectable SPI/I2C compatible interface Extra package address decode pin AD0 Full read/write of wiper register Power-on preset to midscale Single supply 2.7 V to 5.5 V Low temperature coefficient 45 ppm/°C Low power, IDD = 8 μA Wide operating temperature −40°C to +125°C SDO output allows multiple device daisy-chaining Evaluation board available