3 kV RMS Signal and Power Isolated RS-485 Transceiver with 15 kV IEC ESD Features: 3 kV rms isolated RS-485/RS-422 transceiver Low radiated emissions, integrated, isolated dc-to-dc converter Passes EN 55032 Class B with margin on a 2-layer PCB Cable invert smart feature Correct reversed cable connection on A, B, Y, and Z bus pins while maintaining full receiver fail-safe feature ESD protection on RS-485 A, B, Y and Z pins ≥±12 kV IEC61000-4-2 contact discharge ≥±15 kV IEC61000-4-2 air discharge High speed 25 Mbps data rate (ADM2565E/ADM2567E) Low speed 500 kbps data rate for EMI control (ADM2561E/ADM2563E) Flexible power supplies Input VCC supply of 3 V to 5.5 V Logic VIO supply of 1.7 V to 5.5 V VSEL pin to select VISO supply of 5 V (VCC > 4.5 V) or 3.3 V PROFIBUS compliant for 5 V VISO Wide operating temperature range: −40°C to +105°C High common-mode transient immunity: 250 kV/µs Short-circuit, open-circuit, and floating input receiver fail-safe Supports 196 bus nodes (72 kΩ receiver input impedance) Full hot swap support (glitch free power-up/power-down) Safety and regulatory approvals (pending) CSA Component Acceptance Notice 5A, DIN V VDE V 0884-11, UL 1577, CQC11-471543-2012, IEC 61010-1 Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E) 28-lead, fine pitch SOIC_W package (10.15 mm 10.05 mm) with >8.0 mm creepage and clearance

2.5 kV Signal and Power Isolated, 15 kV ESD Protected, Full/Half Duplex RS-485 Transceiver (500kbps) Features: Isolated RS-485/RS-422 transceiver, configurable as half or full duplex isoPower integrated isolated dc-to-dc converter ±15 kV ESD protection on RS-485 input/output pins ADM2582E data rate: 16 Mbps ADM2587E data rate: 500 kbps 5 V or 3.3 V operation See datasheet for additional features

5.7 kV RMS Isolated, High Working Voltage, RS-485 Transceiver with 15 kV IEC ESD Features: 5.7 kV rms, signal isolated RS-485 transceiver 1500 V peak and dc working voltage to DIN V VDE 0884-11 Low radiated emissions: passes EN 55032, Class B with margin on a 2-layer PCB Receiver cable inversion smart feature Correction for reversed cable connection on A and B bus pins while maintaining full receiver fail-safe feature ESD protection on the RS-485 A, B, Y, and Z bus pins ≥ ±12 kV IEC 61000-4-2 contact discharge ≥ ±15 kV IEC 61000-4-2 air discharge Low speed 500 kbps data rate for EMI control Flexible power supply inputs Primary VDD1 supply of 1.7 V to 5.5 V Isolated VDD2 supply of 3.0 V to 5.5 V Profibus® Compliant for 5V VDD2 Wide −40°C to +125°C operating temperature range High common-mode transient immunity: >250 kV/μs Short-circuit, open-circuit, and floating input receiver fail-safe Supports 192 bus nodes (72 kΩ receiver input impedance) Full hot swap support (glitch free power-up and power-down) Safety and regulatory approvals (pending) CSA Component Acceptance Notice 5A, DIN V VDE 0884-11, UL 1577, CQC11-471543-2012, IEC 61010-1 16-lead, wide-body, SOIC_W package with 8.3 mm creepage and clearance in standard pinout

Robust 5 kV RMS Isolated RS-485/RS-422 Transceiver with Level 4 EMC and Full 42 V Protection Features: 5 kV rms isolated RS-485/RS-422 transceiver ±42 V ac/dc peak fault protection on RS-485 bus pins Certified Level 4 EMC protection on RS-485 A, B bus pins IEC 61000-4-5 surge protection (±4 kV) IEC 61000-4-4 electrical fast transient (EFT) protection (±2 kV) IEC 61000-4-2 electrostatic discharge (ESD) protection ±8 kV contact discharge ±15 kV air discharge IEC 61000-4-6 conducted radio frequency (RF) immunity (10 V/m rms) Certified IEC 61000-4-x immunity across isolation barrier IEC 61000-4-2 ESD, IEC 61000-4-4 EFT, IEC 61000-4-5 surge, IEC 61000-4-6 conducted RF immunity, IEC 61000-4-3 radiated immunity, IEC 61000-4-8 magnetic immunity RS-485 A, B pins human body model (HBM) ESD protection: >±30 kV Safety and regulatory approvals (pending) CSA Component Acceptance Notice 5A, DIN V VDE V 0884-10, UL 1577, CQC11-471543-2012 TIA/EIA RS-485/RS-422 compliant over full supply range 3 V to 5.5 V operating voltage range on VDD2 1.7 V to 5.5 V operating voltage range on VDD1 logic supply Common-mode input range of −25 V to +25 V High common-mode transient immunity: >75 kV/μs Robust noise immunity (tested to the IEC 62132-4 standard) Passes EN55022 Class B radiated emissions by 6 dBμV/m margin Receiver short-circuit, open-circuit, and floating input fail-safe Supports 256 bus nodes (96 kΩ receiver input impedance) −40°C to +125°C temperature option Glitch free power-up/power-down (hot swap)ADM2795E-EP supports defense and aerospace applications (AQEC standard) Download ADM2795E-EP data sheet (pdf) Military −55°C to +125°C temperature range Controlled manufacturing baseline 1 assembly/test site Enhanced product change notification Qualification data available on request V62/17611 DSCC Drawing Number

5.7 kV RMS 500kbps Half Duplex Signal and Power Isolated RS-485 Transceiver with 15 kV IEC ESD Features: 5.7 kV rms isolated RS-485/RS-422 transceiver Low radiated emissions, integrated, isolated dc-to-dc converter Passes EN 55032 Class B with margin on a 2-layer PCB Cable invert smart feature Correct reversed cable connection on A, B, Y, and Z bus pins while maintaining full receiver fail-safe feature ESD protection on RS-485 A, B, Y, and Z pins 12 kV IEC61000-4-2 contact discharge 15 kV IEC61000-4-2 air discharge High speed 25 Mbps data rate (ADM2865E/ADM2867E) Low speed 500 kbps data rate for EMI control (ADM2861E/ADM2863E) Flexible power supplies Input VCC supply of 3 V to 5.5 V Logic VIO supply of 1.7 V to 5.5 V VSEL pin to select VISO supply of 5 V (VCC > 4.5 V) or 3.3 V PROFIBUS compliant for 5 V VISO Wide operating temperature range: −40°C to +105°C High common-mode transient immunity: 250 kV/μs Short-circuit, open-circuit, and floating input receiver fail-safe Supports 192 bus nodes (72 k receiver input impedance) Full hot swap support (glitch free power-up/power-down) Safety and regulatory approvals (pending) CSA Component Acceptance Notice 5A, DIN V VDE V 0884-11, UL 1577, CQC11-471543-2012, IEC 61010-1 Complies with ANSI/TIA/EIA-485-A-98 and ISO 8482:1987(E) 28-lead, fine pitch SOIC_W package (10.15 mm 10.05 mm) with >8.0 mm creepage and clearance

3.0 V to 5.5 V, 12 kV IEC ESD Protected, 500 kbps/50 Mbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E/ADM3068E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC

Integrated Optical Module with Ambient Light Rejection and Two LEDs Features: 3.8 mm × 5.0 mm × 0.9 mm module with integrated optical components 2 green LEDs, 2 PDs with IR cut filter 2 external sensor inputs 3, 370 mA LED drivers 20-bit burst accumulator enabling 20 bits per sample period On-board sample to sample accumulator enabling up to 27 bits per data read Custom optical package made to work under a glass window Optimized SNR for signal limited cases I2C or SPI communications

0.5C Accurate, 16-Bit Digital SPI Temperature Sensor Features: Easy implementation No temperature calibration/correction required by user No linearity correction required Low power Power saving 1 sample per second (SPS) mode 700 µW typical at 3.3 V in normal mode 7 µW typical at 3.3 V in shutdown mode High performance Temperature accuracy ±0.5°C from −40°C to +105°C (2.7 V to 3.6 V) ±0.4°C from −40°C to +105°C (3.0 V) 16-bit temperature resolution: 0.0078°C Fast first temperature conversion on power-up of 6 ms See datasheet for additional features

0.5C Accurate, 16-Bit Digital I2C Temperature Sensor Features: High performance Temperature accuracy ±0.5°C from −40°C to +105°C (2.7 V to 3.6 V) ±0.4°C from −40°C to +105°C (3.0 V) 16-bit temperature resolution: 0.0078°C Fast first temperature conversion on power-up of 6 ms Easy implementation No temperature calibration/correction required by user No linearity correction required Low power Power saving 1 sample per second (SPS) mode 700 µW typical at 3.3 V in normal mode 7 µW typical at 3.3 V in shutdown mode Wide operating ranges Temperature range: −55°C to +150°C Voltage range: 2.7 V to 5.5 V Programmable interrupts Critical overtemperature interrupt Overtemperature/undertemperature interrupt I2C-compatible interface 8-lead narrow SOICRoHS-compliant package

Precision Analog Microcontroller, 12-Bit Analog I/O, ARM7TDMI MCU with Enhanced IRQ Handler Features:Analog I/O Multichannel, 12-bit, 1 MSPS ADC Up to 12 ADC channels Fully differential and single-ended modes 0 V to VREF analog input range 12-bit voltage output DACs 4 DAC outputs available On-chip voltage reference On-chip temperature sensor Voltage comparatorMicrocontroller ARM7TDMI core, 16-bit/32-bit RISC architecture JTAG port supports code download and debugClocking options Trimmed on-chip oscillator (±3%) External watch crystal External clock source up to 44 MHz 41.78 MHz PLL with programmable divider Memory 62 kB Flash/EE memory, 8 kB SRAM In-circuit download, JTAG-based debug Software-triggered in-circuit reprogrammability Vectored interrupt controller for FIQ and IRQ 8 priority levels for each interrupt type Interrupt on edge or level external pin inputsOn-chip peripherals 2× fully I2C-compatible channels SPI (20 Mbps in master mode, 10 Mbps in slave mode) With 4-byte FIFO on input and output stages Up to 20 GPIO pins - Digital only GPIOs are 5 V tolerant 3× general-purpose timers Watchdog timer (WDT) Programmable logic array (PLA) 16 PLA elements 16-bit, 5-channel PWM