Clock Drivers & Distribution 800MHz Clock Distribution IC pb free

8-Channel, 1 MSPS, 12-Bit ADC with Sequencer in 20-Lead TSSOP Features: Fast throughput rate: 1 MSPS Specified for AVDD of 2.7 V to 5.25 V Low Power: 6.0 mW max at 1 MSPS with 3 V supply 13.5 mW max at 1 MSPS with 5 V supply Eight (single-ended) inputs with sequencer Wide input bandwidth: AD7928, 70 dB min SINAD at 50 kHz input frequency Flexible power/serial clock speed management No pipeline delays High speed serial interface SPI®/QSPI™/MICROWIRE™/DSP compatible

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

600 mA, Ultralow Noise, High PSRR, RF Linear Regulator Features: Input voltage range: 2.3 V to 5.5 V Output voltage range: 1.2 V to 3.4 V Maximum load current: 600 mA Low noise 0.9 μV rms total integrated noise from 100 Hz to 100 kHz 1.6 μV rms total integrated noise from 10 Hz to 100 kHz Noise spectral density: 1.5 nV/√Hz from 10 kHz to 1 MHz PSRR: >90 dB from 200 Hz to 200 kHz; 57 dB at 1 MHz Dropout voltage: 120 mV typical at VOUT = 3.3 V, IOUT = 600 mA Initial accuracy: ±0.5% Accuracy over line, load, and temperature: −2.0% (minimum), +1.5% (maximum) Quiescent current, IGND = 4 mA at no load Low shutdown current: 0.2 μA Stable with a 10 μF ceramic output capacitor 8-lead LFCSP and 8-lead SOIC packages Precision enable Supported by ADIsimPower tool

2.7 V to 5.5 V, 140 A, Rail-to-Rail Voltage Output 12-Bit DAC in SOT-23 and MicroSOIC Packages Features: Micropower: 140 µA @ 5 V, 115 µA @ 3 V Power-Down to 200 nA @ 5 V, 50 nA @ 3 V Guaranteed Monotonic by design Power-On-Reset to Zero Volts Three Power-Down Functions SYNC (active low) Interrupt Facility Low Power, SPI™, QSPI™, MICROWIRE™ and DSP-Compatible 3-Wire Serial Interface Output Buffer Amplifier with Rail-to-Rail Operation Temperature Range: -40°C to 105°C Three Power-Down Functions

Precision Amplifiers Aual 1 A CMOS OpAmp

400 MSPS 10-Bit DAC 1.8 V CMOS Direct Digital Synthesizer Features: 400 MSPS internal clock speed Integrated 10-bit DAC 32-bit tuning word Phase noise ≤ –120 dBc/Hz at 1 kHz offset (DAC output) Excellent dynamic performance >75 dB SFDR at 160 MHz (±100 kHz offset) AOUT Serial input/output (I/O) control 1.8 V power supply Software and hardware controlled power-down 48-lead TQFP/EP package PLL REFCLK multiplier (4× to 20×) Internal oscillator; can be driven by a single crystal Phase modulation capability Multichip synchronization

3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E/ADM3068E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC

DIGITAL ISOLATOR 35NS SSOP-20; No. of Channels:2 Channel; Propagation Delay:35ns; Supply Voltage Min:2.7V; Supply Voltage Max:5.5V; Interface Case Style:SSOP; No. of Pins:20Pins; Operating Temperature Min:-40°C; Operating Temperature Max:105°C; Packaging:Each; Product Range:ADUM5211 Series; Automotive Qualification Standard:-; MSL:MSL 1 - Unlimited; SVHC:No SVHC (20-Jun-2016); No. of Channels:2Channels

Integrated, Precision Battery Sensor for Automotive Features: High precision ADC Dual channel, simultaneous sampling, 16-bit Σ-Δ ADCs Programmable ADC throughput from 10 Hz to 1 kHz On-chip 5 ppm/ºC voltage reference Current channel Fully differential, buffered input Programmable gain ADC input range: −200 mV to +300 mV Digital comparator with current accumulator feature Voltage channel Buffered, on-chip attenuator for 12 V battery input JTAG port supports code download and debug Memory 64 kB Flash/EE memory options, 4-kB SRAM 10,000-cycle Flash/EE endurance, 20-year Flash/EE retention In-circuit download via JTAG and LIN On-chip peripherals LIN 2.1-compatible slave SPI GPIO port 1 × general-purpose timer Wake-up and watchdog timers On-chip power-on-reset See data sheet for additional features