Dual, 12-Bit, 1 GSPS, Digital-to-Analog Converter Features: Low power: 1.0 W @ 1 GSPS, 600 mW @ 500 MSPS, full operating conditions Single carrier W-CDMA ACLR = 80 dBc @ 80 MHz IF Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω Novel 2×, 4×, and 8× interpolator/coarse complex modulator allows carrier placement anywhere in DAC bandwidth Auxiliary DACs allow control of external VGA and offset control Multiple chip synchronization interface High performance, low noise PLL clock multiplier Digital inverse sinc filter 100-lead, exposed paddle TQFP

Broadband Modem Mixed-Signal Front End Features: Low cost, 3.3 V CMOS MxFE® for broadband modems 10-bit digital-to-analog converter (DAC) 2×/4× interpolation filter 250 MSPS DAC update rate 10-bit, 75 MSPS ADC Low noise RxPGA Dual channel muxed input 6 dB input overload attenuator −12 dB to +48 dB (without attenuator) Third-order programmable low-pass filter Flexible digital datapath interface Half-duplex and full-duplex operation Programmable delay Tx driver disable signal Various power-down/reduction modes Internal clock multiplier (PLL) 2 auxiliary programmable clock outputs 64-lead LFCSP

10-Bit, 8-Channel, 350 kSPS, Serial A/D Converter Features: 10-Bit ADC with 2.3 µs Conversion Time The AD7812 has Eight Single-Ended Inputs that Can Be Configured as Seven Pseudo Differential Inputs with Respect to a Common, or as Four Independent Pseudo Differential Channels Onboard Track and Hold Onboard Reference 2.5 V ± 2.5% Operating Supply Range: 2.7 V to 5.5 V Specifications at 2.7 V-3.6 V and 5 V ± 10% DSP-/Microcontroller-Compatible Serial Interface High Speed Sampling and Automatic Power-Down Modes Package Address Pin on the AD7811 and AD7812 Allows Sharing of Serial Bus in Multipackage Applications Input Signal Range: 0 V to VREF Reference Input Range: 1.2 V to VDD

10-Bit, 8-Channel, 350 kSPS, Serial A/D Converter Features: 10-Bit ADC with 2.3 µs Conversion Time The AD7812 has Eight Single-Ended Inputs that Can Be Configured as Seven Pseudo Differential Inputs with Respect to a Common, or as Four Independent Pseudo Differential Channels Onboard Track and Hold Onboard Reference 2.5 V ± 2.5% Operating Supply Range: 2.7 V to 5.5 V Specifications at 2.7 V-3.6 V and 5 V ± 10% DSP-/Microcontroller-Compatible Serial Interface High Speed Sampling and Automatic Power-Down Modes Package Address Pin on the AD7811 and AD7812 Allows Sharing of Serial Bus in Multipackage Applications Input Signal Range: 0 V to VREF Reference Input Range: 1.2 V to VDD

High Speed, 4-Channel, 8-Bit CMOS ADC Features: 4 or 8 Analog Input Channels Built-In Track-and-Hold Function 10 kHz Signal Handling on Each Channel Fast Microprocessor Interface Single 5 V Supply Low Power: 50 mW Fast Conversion Rate: 2.5 µs/Channel Tight Error Specification: 1/2 LSB

3 V/5 V, 2 MSPS, 8-Bit, 1-/4-/8-Channel Sampling ADCs Features: 8-bit half-flash ADC with 420 ns conversion time 1, 4 and 8 Single-Ended Analog Input Channels Available with Input Offset Adjust On-Chip Track-and-Hold SNR Performance Given for Input Frequencies Up to 10 MHz Automatic Power-Down at the End of Conversion On-Chip Reference (2.5 V) Wide Operating Supply Range: 3 V ± 10% and 5 V ± 10% Input Ranges: 0 V to 2 V p-p, VDD = 3 V ± 10% 0 V to 2.5 V p-p, VDD = 5 V ± 10% Flexible Parallel Interface with EOC Pulse to Allow Stand-Alone Operation

3.0 V to 5.5 V, 12 kV IEC ESD Protected, Half Duplex 500 kbps RS-485 Transceiver Features: TIA/EIA RS-485 compliant over full supply range 3.0 V to 5.5 V operating voltage range on VCC 1.62 V to 5.5 V VIO logic supply option available ESD protection on the bus pins IEC 61000-4-2 ±12 kV contact discharge IEC 61000-4-2 ≥ ±12 kV air discharge HBM: ≥ ±30 kV Full hot swap support (glitch free power-up/power-down) High speed 50 Mbps data rate (ADM3065E/ADM3066E/ADM3067E/ADM3068E) Low speed 500 kbps data rate for long cables (ADM3061E/ADM3062E/ADM3063E) Full receiver short-circuit, open circuit, and bus idle fail-safe Extended temperature range up to 125°C PROFIBUS compliant at VCC ≥ 4.5 V Half duplex and full duplex models available Allows connection of up to 128 transceivers onto the bus Space-saving package options 10-lead, 3 mm × 3 mm LFCSP 8-lead and 10-lead, 3 mm × 3 mm MSOP 8-lead and 14-lead, narrow body SOIC

Complete 12-Bit CMOS Multiplying DAC Features: 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Low Power LC2MOS Guaranteed Monotonic (Tmin to Tmax) Space-Saving 0.3' DIPS and 24- or 28- Terminal Surface Mount Packages Application Resistors On Chip for Gain Ranging, etc.

Complete 12-Bit CMOS Multiplying DAC Features: 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Low Power LC2MOS Guaranteed Monotonic (Tmin to Tmax) Space-Saving 0.3' DIPS and 24- or 28- Terminal Surface Mount Packages Application Resistors On Chip for Gain Ranging, etc.

Complete 12-Bit CMOS Multiplying DAC Features: 12-Bit CMOS MDAC with Output Amplifier 4-Quadrant Multiplication Low Power LC2MOS Guaranteed Monotonic (Tmin to Tmax) Space-Saving 0.3' DIPS and 24- or 28- Terminal Surface Mount Packages Application Resistors On Chip for Gain Ranging, etc.