Dual 12-Bit 800 MSPS DAC with Low Power 32-Bit Complex NCO Features: Analog output: adjustable 8.7 mA to 31.7 mA, RL = 25 Ω to 50 Ω Low power, fine complex NCO allows carrier placement anywhere in DAC bandwidth while adding <300 mW power Auxiliary DACs allow I and Q gain matching and offset control Includes programmable I and Q phase compensation Internal digital upconversion capability Multiple chip synchronization interface High performance, low noise PLL clock multiplier Digital inverse sinc filter 100-lead, exposed pad TQFP package

4T2R Direct RF Transmitter and Observation Receiver Features: Flexible reconfigurable radio common platform design Transmit/receive channel bandwidth up to 1.2 GHz/2.4 GHz (4T2R) RFDAC/RFADC RF frequency range up to 7.5 GHz On-chip PLL with multichip synchronization External RFCLK input option Versatile digital features Configurable digital up/down conversion (DDC and DUC) 8 fine complex DUCs and 4 coarse complex DUCs 8 fine complex DDCs and 4 coarse complex DDCs, 2 independent 48-bit NCO per DUC/DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Programmable delay and gain per transmit data path Coarse DDC delay adjust for DPD observation path Auxiliary features Power amplifier downstream protection circuitry On-chip temperature monitoring unit Programmable GPIO pins supporting different user configurations ADC clock driver with selectable divide ratios TDD power savings option and sharing ADCs SERDES JESD204B/JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes per each DAC and ADC JESD204B compatible with maximum 15.5 Gbps lane rate JESD204C compatible with maximum 24.75 Gbps lane rate Supports real or complex digital data (8-bit, 12-bit, 16-bit, or 24-bit) 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

4T4R Direct RF Receiver and Transmitter Features: Flexible, reconfigurable radio common platform design Transmitter/receiver channel bandwidth up to 1.2 GHz (4T4R) RF DAC/RF ADC RF frequency range up to 7.5 GHz On-chip PLL with multichip synchronization External RF clock input option Versatile digital features Selectable interpolation and decimation filters Configurable DDCs and DUCs 8 fine complex DUCs (FDUC) and 4 coarse complex DUCs (CDUC) 8 fine complex DDCs (FDDC) and 4 coarse complex DDCs (CDDC) FDUCs and FDDCs are fully bypassable 2 independent 48-bit NCOs per DUC or DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Programmable delay and gain per transmit data path Coarse DDC delay adjust for DPD observation path Supports real or complex digital data (8-, 12-, or 16-bit) Auxiliary features ADC clock driver with selectable divide ratios Power amplifier downstream protection circuitry On-chip temperature monitoring unit Programmable GPIO pins support toggling between modes TDD power savings option and sharing ADCs SERDES JESD204B or JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes JESD204B/C transmitter (JTx) and 8 lanes JESD204B/C receiver (JRx) Supports Subclass 1 Supports multidevice synchronization 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch

30 V, Micropower, Overvoltage Protection, Rail-to-Rail Input/Output Quad Op Amplifier Features: Input overvoltage protection, 32 V above and below the supply rails No phase reversal for input voltage up to ±32 V beyond the power supply Rail-to-rail input and output swing Low power: 60 μA per amplifier typical Unity-gain bandwidth 800 kHz typical at VSY = ±15 V 550 kHz typical at VSY = ±5 V 465 kHz typical at VSY = ±1.5 V Single-supply operation: 3 V to 30 V Low offset voltage: 300 μV maximum Large signal voltage gain: 120 dB typical Unity gain stable Qualified for automotive applications

50 V, 130 kHz, 32.5 A, Robust, Over-The-Top Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

50 V, 130 kHz, 32.5 A per Channel, Robust, Over-The-Top, Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

50 V, 130 kHz, 32.5 A per Channel, Robust, Over-The-Top, Precision Op Amp Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 32.5 μA (typical) Low input offset voltage: ±60 μV maximum Low input offset voltage drift: ±1 μV/°C maximum (B grade) Low input voltage noise 6 Hz typical 1/f noise corner 1000 nV p-p typical at 0.1 Hz to 10 Hz GBP: 130 kHz typical for fTEST = 250 Hz Slew rate: 0.1 V/μs typical at ΔVOUT = 4 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±300 pA maximum Large signal voltage gain: 120 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade) Shutdown feature available for single 6-lead TSOT and dual 10-lead LFCSP packages

50 V, 1 MHz, 165 A per Channel, Robust, Over-The-Top, Precision Op Amps Features: Ultrawide common-mode input range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: +3 V to +50 V (to ±25 V for PSRR) Low power supply current: 165 μA per channel (typical) Low input offset voltage: ±35 μV maximum Low input offset voltage drift: ±0.5 μV/°C maximum (B grade) Low input voltage noise 1/f noise corner: 6 Hz typical 400 nV p-p typical at 0.1 Hz to 10 Hz 17 nV/√Hz typical at 100 Hz High speed GBP: 1.05 MHz typical for fTEST = 2.5 kHz Slew rate: 0.85 V/μs typical at ΔVOUT = 25 V Low power supply current shutdown: 20 μA maximum Low input offset current: ±700 pA maximum Large signal voltage gain: 126 dB minimum for ΔVOUT = 3.5 V CMRR: 120 dB minimum at VCM = −0.1 V to +70 V PSRR: 123 dB minimum at VSY = +3 V to ±25 V Input overdrive tolerant with no phase reversal ±3 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade)

50 V, 8 MHz, 1.5 mA per Channel, Robust, Over-The-Top, Precision Op Amps Features: Ultrawide common-mode range: −VS − 0.1 V to −VS + 70 V Wide power supply voltage range: (VSY): +3.15 V to +50 V (±25 V for PSRR) Low supply current: 1.5 mA per channel (typical) Low input offset voltage: ±40 μV maximum Low input offset voltage drift: ±0.4 μV/°C maximum Low voltage noise: 1/f noise corner: 6 Hz typical 150 nV p-p typical at 0.1 Hz to 10 Hz 7 nV/√Hz typical at 100 Hz (en) High speed GBP: 8 MHz typical Slew rate: 5.5 V/μs typical at ΔVOUT = 25 V Low power shutdown: 20 μA maximum Low input bias current: ±10 nA maximum Large signal voltage gain: 120 dB minimum CMRR: 118 dB, minimum PSRR: 123 dB, minimum Input overdrive tolerant with no phase reversal ±2 kV HBM and ±1.25 kV FICDM Wide temperature range: −55°C to +150°C (H grade)

MxFE Quad, 16-Bit, 12 GSPS RF DAC and Dual, 12-Bit, 6 GSPS RF ADC Features:Flexible reconfigurable common platform design 4 DACs and 2 ADCs (4D2A) and 2D2A options Supports single, dual, and quad band Datapaths and DSP blocks are fully bypassableDAC to ADC sample rate ratios of 1, 2, 3, and 4 On-chip PLL with multichip synchronization External RFCLK input option for off-chip PLL Maximum DAC sample rate up to 12 GSPS Maximum data rate up to 12 GSPS using JESD204C Useable analog bandwidth to 8 GHz Maximum ADC sample rate up to 6 GSPS Maximum data rate up to 6 GSPS using JESD204C Useable analog bandwidth to 8 GHz ADC ac performance at 6 GSPS, input at 2.7 GHz, 1 dBFS Full-scale input voltage: 1.475 V p-p Noise density: 147.5 dBFS/Hz Noise figure: 25.3 dB HD2: 72 dBFS HD3: 68 dBFS Worst other (excluding HD2 and HD3): 78 dBFS DAC ac performance at 12 GSPS, output at 2.6 GHz Full-scale output current range: 6.43 mA to 37.75 mA Two-tone IMD3 (6 dBFS per tone): 72 dBc NSD, single-tone: 160 dBc/Hz SFDR, single-tone: 75 dBc Versatile digital features Selectable interpolation and decimation filters Configurable DDC and DUC 8 fine complex DUCs and 4 coarse complex DUCs 8 fine complex DDCs and 4 coarse complex DDCs 48-bit NCO per DUC or DDC Option to bypass fine and coarse DUC/DDC Programmable 192-tap PFIR filter for receive equalization Supports 4 different profile settings loaded via GPIO Programable delay per data path Receive AGC support Fast detect with low latency for fast AGC control Signal monitor for slow AGC control Dedicated AGC support pins Transmit DPD support Fine DUC channel gain control and delay adjust Coarse DDC delay adjust for DPD observation path Auxiliary features Fast frequency hopping Direct digital synthesis (DDS) Low latency loopback modes (receive datapath data can be routed to the transmit datapaths) ADC clock driver with selectable divide ratios Power amplifier downstream protection circuitry On-chip temperature monitoring unit Flexible GPIO pins TDD power savings option SERDES JESD204B/JESD204C interface, 16 lanes up to 24.75 Gbps 8 lanes JESD204B/C transmitter (JT×) and 8 lanes JESD204B/C receiver (JR×) JESD204B compliance with the maximum 15.5 Gbps JESD204C compliance with the maximum 24.75 Gbps Supports real or complex digital data (8-, 12-, 16-, or 24-bit) 15 mm × 15 mm, 324-ball BGA with 0.8 mm pitch