DA CONVERTOR;

DA CONVERTOR;

DA CONVERTOR;

DA CONVERTOR;

DA CONVERTOR;

Single Supply, 24-Bit, Sigma-Delta ADC with 10 V and 0 mA to 20 mA Inputs, Open Wire Detection Features: Tested for robustness per: IEC6100-4-2, IEC6100-4-3, IEC6100-4-4, IEC6100-4-5, IEC6100-4-6, CISPR 11 24-bit ADC with integrated analog front end Fast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 μs settling) 16 noise free bits at 1 kSPS per channel 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel ±10 V inputs, 4 differential or 8 single-ended Pin absolute maximum rating ±50 V Absolute input pin voltage up to ±20 V ≥1 MΩ impedance ±0.06% accuracy at 25°C Open wire detection 0 mA to 20 mA inputs, 4 single-ended Pin absolute maximum rating ±50 mA Input range from −0.5 mA to +24 mA 60 Ω impedance ±0.08% accuracy at 25°C On-chip 2.5 V reference ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift Internal or external clock Power supplies AVDD = 3.0 V to 5.5 V IOVDD = 2 V to 5.5 V Total IDD = 3.9 mA Temperature range: −40°C to +105°C 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK) SPI, QSPI, MICROWIRE, and DSP compatible

Single-Supply, Multichannel, 125 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 2.5 SPS to 125 kSPSChannel scan data rate of 24,845 SPS per channel (40.25 s settling)85 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedanceOn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 4.5 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 10.4 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

Fully Accurate 12-Bit VOUT nanoDAC SPI Interface 4.5 V to 5.5 V in a TSSOP Features: Low power dual 12-/14-/16-bit DAC, ±1 LSB INL Individual voltage reference pins Rail-to-rail operation 4.5 V to 5.5 V power supply Power-on reset to zero scale or midscale Power down to 400 nA at 5 V 3 power-down functions Per channel power-down Low glitch upon power-up Hardware power-down lockout capability Hardware LDAC with software LDAC override function CLR function to programmable code SDO daisy-chaining option 14-lead TSSOP

256 Position SPI/I2C Selectable Digital Potentiometer Features: 256-position End-to-end resistance 5 kΩ, 10 kΩ, 50 kΩ, 100 kΩ Compact MSOP-10 (3 mm × 4.9 mm) package Pin selectable SPI/I2C compatible interface Extra package address decode pin AD0 Full read/write of wiper register Power-on preset to midscale Single supply 2.7 V to 5.5 V Low temperature coefficient 45 ppm/°C Low power, IDD = 8 μA Wide operating temperature −40°C to +125°C SDO output allows multiple device daisy-chaining Evaluation board available

Nonvolatile, Quad, 64-Position Digital Potentiometer Features: Nonvolatile Memory Preset Maintains Wiper Settings 4-channel independent programmable 64-position resolution EEMEM restore time: 140 μs typical Full monotonic operation 10 kΩ, 50 kΩ, and 100 kΩ terminal resistance See Data Sheet for Additional Information