18-Bit, 2 MSPS/1 MSPS/500 kSPS, Precision, Pseudo Differential, SAR ADCs Features: Easy Drive Greatly reduced input kickback Input current reduced to 0.5 μA/MSPS Enhanced acquisition phase, ≥79% of cycle time at 1 MSPS First conversion accurate, no latency or pipeline delay Input span compression for single-supply operation Fast conversion allows low SPI clock rates Input overvoltage clamp protection sinks up to 50 mA SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface High performance Pseudo differential analog input range 0 V to VREF with VREF from 2.4 V to 5.1 V Throughput: 2 MSPS/1 MSPS/500 kSPS options INL: ±3.2 LSB maximum Guaranteed 18-bit, no missing codes SNR: 95 dB at fIN = 1 kHz at VREF = 5 V THD: −125 dB at fIN = 1 kHz, −108 dB at fIN = 100 kHz SINAD: 84.5 dB at fIN = 1 MHz (see Figure 17 in data sheet) Oversampled dynamic range 98 dB for OSR = 2 125 dB for OSR = 1024 Low power Single 1.8 V supply operation with 1.71 V to 5.5 V logic interface 2.5 mW at 500 kSPS (VDD only) 70 μW at 10 kSPS, 14 mW at 2 MSPS (total power) 10-lead packages: 3 mm × 3 mm LFCSP, 3 mm × 4.90 mm MSOP Pin compatible with AD4003/AD4007/AD4011 family Guaranteed operation: −40°C to +125°C

Single-Supply, Multichannel, 125 kSPS, 24-Bit, Sigma-Delta ADC with 10 V Inputs Features:24-bit ADC with integrated AFEFast and flexible output rate: 2.5 SPS to 125 kSPSChannel scan data rate of 24,845 SPS per channel (40.25 s settling)85 dB common mode rejection of 50 Hz and 60 Hz at 20 SPS per channel10 V inputs, either 8 differential or 16 single-endedVIN pin absolute maximum rating 65 VAbsolute input pin voltage up to 20 VMinimum 1 M impedanceOn-chip 2.5 V reference0.12% initial accuracy at 25C, 5 ppm/C (typical) driftInternal or external clockPower suppliesAVDD = 4.5 V to 5.5 VIOVDD = 2 V to 5.5 VTotal current consumption AVDD + IOVDD (IDD) = 10.4 mATemperature range: 40C to +105C3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)SPI, QSPI, MICROWIRE, and DSP compatible

Fully Accurate 12-Bit VOUT nanoDAC SPI Interface 4.5 V to 5.5 V in a TSSOP Features: Low power dual 12-/14-/16-bit DAC, ±1 LSB INL Individual voltage reference pins Rail-to-rail operation 4.5 V to 5.5 V power supply Power-on reset to zero scale or midscale Power down to 400 nA at 5 V 3 power-down functions Per channel power-down Low glitch upon power-up Hardware power-down lockout capability Hardware LDAC with software LDAC override function CLR function to programmable code SDO daisy-chaining option 14-lead TSSOP

CMOS 12-Bit Buffered Multiplying DAC With Onboard Data Latches Features: 12-Bit Resolution Low Gain TC: 2ppm/°C typ Fast TTL Compatible Data Latches Small 20-Lead 0.3" DIP and 20-Terminal Surface Mount Packages Single +5 V to +15 V Supply Latch Free (Schottky Protection Diode not Required) Low Cost Ideal for Battery Operated Equipment

LC2CMOS, Quad 8-Bit Voltage Output DAC Features: Four 8-Bit DACs with Output Amplifiers Skinny 20-Lead DIP, SOIC, SSOP, and PLCC Packages Microprocessor-Compatible TTL/CMOS-Compatible No User Trims Extended Temperature Range Operation Single Supply Operation Possible

Complete 12-Bit, 100 kHz, Sampling ADC (AD7870/AD7870A) Features: Complete Monolithic 12-Bit ADC with: 2 µs Track/Hold Amplifier 8 µs A/D Converter On-Chip Reference Laser-Trimmed Clock Parallel, Byte and Serial Digital Interface 57 ns Data Access Time 72 dB SNR at 10 kHz Input Frequency (AD7870, AD7875) Low Power: –60 mW typ Variety of Input Ranges: ±3 V for AD7870 0 V to +5 V for AD7875 ±10 V for AD7876

1-A, low input and output voltage, ultra-low-dropout (LDO) voltage regulator 6-DSBGA -40 to 125

1-A, low input and output voltage, ultra-low-dropout (LDO) voltage regulator 6-DSBGA -40 to 125

2.5V to 5.5V, 115A Parallel Interface Single Voltage Output 10-Bit DAC Features: Single 10-Bit DAC in 20-Lead TSSOP Low power operation: 115 μA @ 3 V, 140 μA @ 5 V Power-down to 80 nA @ 3 V, 200 nA @ 5 V via PD Pin 2.5 V to 5.5 V power supply Guaranteed monotonic by design over all codes Double-Buffered Input Logic Buffered/unbuffered reference input options See Data Sheet for Additional Information

2.5 V to 5.5 V, 230 A, Dual Rail-to-Rail Voltage Output 12-Bit DAC Features: AD5313: 2 buffered 10-bit DACs in 1 package A version: ±4 LSB INL B version: ±2 LSB INL AD5323: 2 buffered 12-bit DACs in 1 package A version: ±16 LSB INL  B version: ±8 LSB INL 16-lead TSSOP package Power-down to 200 nA @ 5 V, 50 nA @ 3 V Micropower operation: 300 μA at 5 V (including reference current) 2.5 V to 5.5 V power supply Double-buffered input logic Guaranteed monotonic by design over all codes Buffered/unbuffered reference input options Output range: 0 V to VREF or 0 V to 2 VREF Power-on-reset to 0 V