10-Bit, 4 Oversampled SDTV Video Decoder Decoder with Differential Inputs Features: Worldwide NTSC/PAL/SECAM color demodulation support One 10-bit analog-to-digital converter (ADC), 4× oversampling per channel for CVBS, Y/C, and YPrPb modes Analog video input channels with on-chip antialiasing filter ADV7281: up to 4 input channels ADV7281-M: up to 6 input channels ADV7281-MA: up to 8 input channels Video input support for CVBS (composite), Y/C (S-Video), and YPrPb (component) Short-to-battery (STB) diagnostics on 2 video inputs (ADV7281 and ADV7281-M only) Up to 4 V common-mode input range solution Excellent common-mode noise rejection capabilities 5-line adaptive 2D comb filter and CTI/DNR video enhancement Adaptive Digital Line Length Tracking (ADLLT), signal processing, and enhanced FIFO management provide mini-time base correction (TBC) functionality See data sheet for additional features

Very Low Noise, Differential Amplifier and 5MHz Lowpass Filter Features: Programmable Differential Gain via Two External Resistors Adjustable Output Common Mode Voltage Operates and Specified with 3V, 5V, ±5V Supplies 0.5dB Ripple 4th Order Lowpass Filter with 5MHz Cutoff 82dB S/N with 3V Supply and 2VP-P Output Low Distortion, 2VP-P, 800Ω Load 1MHz: 93dBc 2nd, 96dBc 3rd Fully Differential Inputs and Outputs Compatible with Popular Differential Amplifier Pinouts Available in an SO-8 Package

Low IQ Synchronous Step-Down Controller Features: Wide Output Voltage Range: 0.8V ≤ VOUT ≤ 10V Low Operating IQ: 80µA OPTI-LOOP® Compensation Minimizes COUT ±1% Output Voltage Accuracy Wide VIN Range: 4V to 36V Operation Phase-Lockable Fixed Frequency 140kHz to 650kHz Dual N-Channel MOSFET Synchronous Drive Very Low Dropout Operation: 99% Duty Cycle Adjustable Output Voltage Soft-Start or Tracking Output Current Foldback Limiting Output Overvoltage Protection Low Shutdown IQ: 10µA Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at Light Loads Small 16-Lead Narrow SSOP or 3mm × 5mm DFN Package

Single Switch Synchronous Forward Controller Features: Synchronous Rectifier Control for High Efficiency Programmable Volt-Second Clamp Output Power Levels from 25W to 500W Low Current Start-Up (LT1952: 460µA; VIN On/Off = 14.25V/8.75V) (LT1952-1: 400µA; VIN On/Off = 7.75V/6.5V) True PWM Soft-Start Low Stress Short Circuit Protection Precision 107mV Current Limit Threshold Adjustable Delay for Synchronous Timing Accurate Shutdown Threshold with Programmable Hysteresis Programmable Slope Compensation Programmable Leading Edge Blanking Programmable Frequency (100kHz to 500kHz) Synchronizable to an External Clock up to 1.5 • fOSC Internal 1.23V Reference 2.5V External Reference Current Mode Control Small 16-Pin SSOP Package

Multiple Supply Hot Swap Controller with I2C Compatible Monitoring Features: Allows Safe Insertion into Live CompactPCI™ or PCI Express™ Backplane 8-Bit ADC Monitors Current and Voltage I2C™/SMBus Interface dI/dt Controlled Soft Start Simultaneous or Sequenced Turn-On ±20V Absolute Maximum Rating for ±12V Supplies No External Gate Capacitor Required Dual-Level Circuit Breaker and Current Limit Bus Precharge Output Power Good Input with Timeout Optional Latch-off or Autoretry After Faults Alerts Host After Faults Integrated LOCAL_PCI_RST# Logic 36-Pin SSOP and 38-Pin (5mm × 7mm) QFN Packages

Photoflash Charger with Adjustable Input Current and IGBT Driver Features: Adjustable Input Current Integrated IGBT Driver No Output Voltage Divider Needed Uses Small Transformers: 5.8mm × 5.8mm × 3mm Fast Photoflash Charge Times Charges Any Size Photoflash Capacitor Supports Operation from Single Li-Ion Cell, Two AA Cells or any Supply from 1.5V Up to 16V Small 10-Lead (3mm × 2mm) DFN Package

12-Bit, 210Msps ADC Features: Sample Rate: 210Msps 65.5dB SNR 78dB SFDR 1.2GHz Full Power Bandwidth S/H Single 2.5V Supply Low Power Dissipation: 585mW LVDS, CMOS, or Demultiplexed CMOS Outputs Selectable Input Ranges: ±0.5V or ±1V No Missing Codes Optional Clock Duty Cycle Stabilizer Shutdown and Nap Modes Data Ready Output Clock Pin Compatible Family 250Msps: LTC2242-12 (12-Bit), LTC2242-10 (10-Bit) 210Msps: LTC2241-12 (12-Bit), LTC2241-10 (10-Bit) 170Msps: LTC2240-12 (12-Bit), LTC2240-10 (10-Bit) 185Msps: LTC2220-1 (12-Bit) 170Msps: LTC2220 (12-Bit), LTC2230 (10-Bit) 135Msps: LTC2221 (12-Bit), LTC2231 (10-Bit) 64-Pin 9mm × 9mm QFN Package

>10 W (42 dBm), 2.7 GHz to 3.8 GHz, GaN Power Amplifier Features: High small signal gain: 34.5 dB typical High output power: 42 dBm typical at PIN = 18 dBm High PAE: 55% typical at PIN = 18 dBm Frequency range: 2.7 GHz to 3.8 GHz Supply voltage: VDD = 28 V at a quiescent current of 150 mA 5 mm × 5 mm, 32-lead LFCSP_CAV package

1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz Features: 1 dB LSB Steps to 15 dB ±0.2 dB Typical Step Error Low Insertion Loss: 1 dB High IP3: +50 dBm Single Control Line Per Bit TTL/CMOS Compatible Control Single +5V Supply 3x3 mm SMT Package

5.6 GHz to 8.6 GHz, GaAs, MMIC, I/Q Downconverter Features: Conversion gain: 13 dB typical Image rejection: 32 dBc typical Input P1dB compression: −6 dBm typical Input IP3: 3 dBm typical, 6.0 GHz to 8.6 GHz Noise figure: 2 dB typical LO to RF isolation: 48 dBm typical LO to IF isolation: 13 dBm typical RF to IF isolation: 10 dBm typical Amplitude balance: 0.2 dB typical Phase balance: −2° typical RF return loss: 10 dB typical LO return loss: 15 dB typical IF return loss: 15 dB typical Exposed paddle, 4 mm × 4 mm, 24-lead, LFCSP