Dual Channel, 16-Bit, 16 MUPS, Multispan, Multi-IO SPI DAC Features: 16-bit resolution 16 MUPS single channel rate in fast mode 11 MUPS single channel rate in precision mode 78 ns small signal settling time to 0.1% accuracy 100 ns large signal settling time to 0.1% accuracy Ultrasmall glitch: <50 pV×s Ultralow latency: 5 ns THD: −105 dB at 1 kHz Highly configurable output voltage span and offset 1.2 V and 1.8 V logic level compatible Single (classic) and dual SPI modes Multiple error detectors, both analog and digital domains 2.5 V internal voltage reference, 10 ppm/°C maximum temperature coefficient Small package: 4 mm × 4 mm LFCSP

Dual Channel, 16-Bit, 33 MUPS, Multispan, Multi-IO SPI DAC Features: 16-bit resolution 33 MUPS single channel rate in fast mode 22 MUPS single channel rate in precision mode 65 ns small signal settling time to 0.1% accuracy 100ns large signal settling time to 0.1% accuracy Ultra small glitch: < 50 pV×s Ultra low latency: 5 ns THD: −105 dB at 1 kHz Highly configurable output voltage span and offset 1.2 V and 1.8 V logic level compatible Single (classic), dual, and quad SPI modes Multiple error detectors, both analog and digital domains 2.5 V internal voltage reference, 10 ppm/°C maximum temperature coefficient 5 mm × 5 mm LFCSP

18-Bit, 2 MSPS/1 MSPS/500 kSPS, Precision, Pseudo Differential, SAR ADCs Features: Easy Drive Greatly reduced input kickback Input current reduced to 0.5 μA/MSPS Enhanced acquisition phase, ≥79% of cycle time at 1 MSPS First conversion accurate, no latency or pipeline delay Input span compression for single-supply operation Fast conversion allows low SPI clock rates Input overvoltage clamp protection sinks up to 50 mA SPI-/QSPI-/MICROWIRE-/DSP-compatible serial interface High performance Pseudo differential analog input range 0 V to VREF with VREF from 2.4 V to 5.1 V Throughput: 2 MSPS/1 MSPS/500 kSPS options INL: ±3.2 LSB maximum Guaranteed 18-bit, no missing codes SNR: 95 dB at fIN = 1 kHz at VREF = 5 V THD: −125 dB at fIN = 1 kHz, −108 dB at fIN = 100 kHz SINAD: 84.5 dB at fIN = 1 MHz (see Figure 17 in data sheet) Oversampled dynamic range 98 dB for OSR = 2 125 dB for OSR = 1024 Low power Single 1.8 V supply operation with 1.71 V to 5.5 V logic interface 2.5 mW at 500 kSPS (VDD only) 70 μW at 10 kSPS, 14 mW at 2 MSPS (total power) 10-lead packages: 3 mm × 3 mm LFCSP, 3 mm × 4.90 mm MSOP Pin compatible with AD4003/AD4007/AD4011 family Guaranteed operation: −40°C to +125°C

Single Supply, 24-Bit, Sigma-Delta ADC with 10 V and 0 mA to 20 mA Inputs Features: Internal or external clock Tested for robustness per: IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, CISPR 11 24-bit ADC with integrated analog front end Fast and flexible output rate: 1.25 SPS to 31.25 kSPS Channel scan data rate of 6.21 kSPS per channel (161 μs settling) 16 noise free bits at 1 kSPS per channel 85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel ±10 V inputs, 4 differential or 8 single-ended Pin absolute maximum rating ±50 V Absolute input pin voltage up to ±20 V ≥1 MΩ impedance ±0.06% accuracy at 25°C 0 mA to 20 mA inputs, 4 single-ended Pin absolute maximum rating ±50 mA Input range from −0.5 mA to +24 mA 60 Ω impedance ±0.08% accuracy at 25°C On-chip 2.5 V reference ±0.12% accuracy at 25°C, ±5 ppm/°C (typical) drift Power supplies AVDD = 3.0 V to 5.5 V IOVDD = 2 V to 5.5 V Total IDD = 3.9 mA Temperature range: −40°C to +105°C 3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK) SPI, QSPI, MICROWIRE, and DSP compatible

16-Bit, 16-Channel, 500 kSPS/1 MSPS, Easy Drive Multiplexed SAR ADC Features: Easy Drive Reduced analog input and reference drive requirements On-chip reference buffer (WLCSP only) Overvoltage protection up to 5 mA on each analog input Long acquisition phase, ≥71.5% (715 ns/1000 ns) of cycle time at 1 MSPS High performance Sample rate: 500 kSPS (AD4695) or 1 MSPS (AD4696) INL: ±1.0 LSB maximum Guaranteed 16-bit, no missing codes SINAD: 93 dB typical, fIN = 1 kHz Oversampled dynamic range: 111.2 dB, OSR = 64 Small footprint, high channel density 32-lead 5 mm × 5 mm LFCSP 36-ball 2.96 mm × 2.96 mm WLCSP Easy Drive features support system level designs with fewer components Enhanced digital functionality First conversion accurate, no latency or pipeline delay Fast conversion time and dual-/quad-SDO modes allow low SPI clock rates Customizable channel sequencer On-chip oversampling and decimation Threshold detection alerts Offset and gain correction Autonomous conversion (autocycle) mode 1.14 V to 1.98 V logic SPI Low power 8 mW at fS = 1 MSPS and 4 mW at fS = 500 kSPS 4 μW standby power dissipation with the internal LDO disabled Internal LDO enables 3.15 V to 5.5 V, single analog supply operation Wide operating temperature range: −40°C to +125°C

Single Channel, 64-Position, Push-Button, 8% Resistor Tolerance, Nonvolatile Digital Potentiometer Features: Nominal resistor tolerance error: ±8% maximum Wiper current: ±6 mA Rheostat mode temperature coefficient: 35 ppm/°C Low power consumption: 2.5 μA max @ 2.7 V and 125°C Wide bandwidth: 4 MHz (5 kΩ option) Power-on EEPROM refresh time < 50 μs 50-year typical data retention at 125°C 1 million write cycles 2.3 V to 5.5 V supply operation Built-in adaptive debouncer Wide operating temperature: −40°C to +125°C Thin, 2 mm × 2 mm × 0.55 mm, 8-lead LFCSP package

Quad Channel, 256-Position, I2C / SPI, Nonvolatile Digital Potentiometer Features: 10 kΩ and 100 kΩ resistance options Resistor tolerance: 8% maximum Wiper current: ±6 mA Low temperature coefficient: 35 ppm/°C Wide bandwidth: 3 MHz Fast start-up time < 75 μs Linear gain setting mode Single- and dual-supply operation Independent logic supply: 1.8 V to 5.5 V Wide operating temperature: −40°C to +125°C 4 mm × 4 mm package optionAD5144-EP Supports defense and aerospace applications (AQEC standard) Download AD5144-EP data sheet (PDF) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline One assembly/test site One fabrication site Product change notification Qualification data available on request V62/20603

256-Position Dual Channel SPI Digital Potentiometer Features: 2-Channel, 256-position potentiometer End-to-End Resistance  2.5kΩ, 10kΩ, 50kΩ, 100kΩ Compact 10-lead MSOP (3 mm x 4.9 mm) package Fast settling time: ts = 5 μs typical on power-up Full read/write of wiper register Power-On preset to midscale Single Supply: 2.7 V to 5.5 V Low Temperature  Coefficient 35 ppm/°C Low power, IDD = 6 µA maximum Wide operating temperature: –40°C to +125°C Evaluation board available Qualified for automotive applications

Fractional-N PLL with Integrated VCO SMT, 1815 - 2010 MHz Features: RF Bandwidth: 1815 - 2010 MHz Fractional or Integer Modes 19-Bit Prescaler Ultra Low Phase Noise -110 dBc/Hz in Band Typ. Figure of Merit (FOM) -227 dBc Integer 24-Bit Step Size, 3 Hz Resolution Typ. 200 MHz, 14-bit Reference Path Input Cycle Slip Prevention 40 Lead 6x6mm SMT Package: 36mm²

11.90 GHz to 18.30 GHz Quadband VCO Features: Set of 4 narrow-band VCOs with consistent sensitivity vs. frequency RF and tuning ports common to all 4 VCOs RF output operates from fundamental oscillators with no subharmonic oscillations Up to 8 dBm RF output power Power mute capability No external resonator required 40-lead, 6 mm × 6 mm LFCSP