Isolated, Precision Half-Bridge Driver, 0.1 A Output Features: Isolated high-side and low-side outputs High side or low side relative to input: ±700 VPEAK High-side/low-side differential: 700 VPEAK 0.1 A peak output current High frequency operation: 5 MHz maximum High common-mode transient immunity: >75 kV/µs High temperature operation: 105°C Wide body, 16-lead SOIC Safety and regulatory approvals UL recognition 2500 V rms for 1 minute per UL 1577 VDE certificate of conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak

Micropower, Dual-Channel Digital Isolators, Default Low (2/0 Channel Directionality) Features: Ultralow power operation 3.3 V operation 6 μA per channel quiescent current, refresh enabled 0.3 μA per channel quiescent current, refresh disabled 148 μA/Mbps per channel typical dynamic current 116 μA/Mbps per channel typical dynamic current Quad-channel products available See datasheet for additional features

Robust, Triple Ch. Isolator W/ Output Enable & 0 Reverse Channels Features: High common-mode transient immunity: 100 kV/µs High robustness to radiated and conducted noise Low propagation delay 13 ns maximum for 5 V operation 15 ns maximum for 1.8 V operation 150 Mbps maximum guaranteed data rate Backward compatibility ADuM130E1/ADuM131E1 pin compatible with ADuM1300/ADUM1301 Low dynamic power consumption 1.8 V to 5 V level translation High temperature operation: 125°C Fail-safe high or low options 16-lead, RoHS compliant, SOIC package See data sheet for additional information

Dual-Channel, Digital Isolator, Enhanced System-Level ESD Reliability Features: Enhanced system-level ESD performance per IEC 61000-4-x  High temperature operation: 125°C Narrow body, RoHS-compliant, 8-lead SOIC Low power operation  5 V operation (refer to data sheet) 3.3 V operation (refer to data sheet) Bidirectional communication 3.3 V/5 V level translation See data sheet for additional featuresADuM3200-EP supports defense and aerospace applications (AQEC standard) Download ADuM3200-EP Data Sheet (pdf) Military temperature range (−55°C to +125°C) Controlled manufacturing baseline  Enhanced product change notification  Qualification data available on request Qualified for automotive applications Automotive versions qualified per AEC-Q100 V62/14627 DSCC Drawing Number

Triple-Channel, Digital Isolator, Enhanced System-Level ESD Reliability (2/1 channel directionality) Features: Enhanced system-level ESD performance per IEC 61000-4-x Low power operation 5 V operation 2.0 mA per channel maximum at 0 Mbps to 2 Mbps 4.1 mA per channel maximum at 10 Mbps 36 mA per channel maximum at 90 Mbps 3.3 V operation 1.0 mA per channel maximum at 0 Mbps to 2 Mbps 2.8 mA per channel maximum at 10 Mbps 17 mA per channel maximum at 90 Mbps Bidirectional communication 3.3 V/5 V level translation High temperature operation: 105°C High data rate: dc to 90 Mbps (NRZ) Precise timing characteristics 2 ns maximum pulse width distortion 2 ns maximum channel-to-channel matching High common-mode transient immunity: >25 kV/μs Output enable function 16-lead SOIC wide body, RoHS-compliant package Safety and regulatory approvals UL recognition: 2500 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice 5A VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10): 2006-12 VIORM = 560 V peak CQC Certification per GB4943.1-2011

Micropower 3-Sensor Combination Including Acceleration and Temperature Features: All sensors sampled synchronously Up to 400 Hz ODR Samples can be synchronized to external trigger Ultralow power 1.95 A at 100 Hz ODR, 2.0 V supply, all sensors on 270 nA at 6 Hz motion activated wake-up mode 10 nA standby current 12-bit resolution for all sensors Acceleration scale factor down to 1 mg/LSB Temperature scale factor: 0.065C/LSB (typical) Built-in features for motion-based system level power savings Adjustable threshold sleep/wake modes for motion activation Accelerometer, temperature sensor, and provision for third analog sensor input Autonomous interrupt processing, without need for microcontroller intervention, to allow the rest of the system to be turned off completely Deep embedded FIFO minimizes host processor load Awake state output enables implementation of standalone, motion activated switch Wide supply and I/O voltage ranges: 1.6 V to 3.5 VOperates off 1.8 V to 3.3 V railsPower can be derived from coin cell batterySPI digital interfaceSmall and thin 3 mm 3.25 mm 1.06 mm package

1.2 A, 20 V, 700 kHz Nonsynchronous Step-down Switching Regulator Features: High efficiency, up to 91% 1.2 A maximum load current ±2% output accuracy over temperature range 700kHz (ADP2300) or 1.4MHz (ADP2301) switching frequency options Wide input voltage range: 3.0 V to 20 V Current-mode control architecture Output voltage from 0.8 V to 0.85×VIN See datasheet for additional features

High Accuracy Ultralow IQ, 300 mA, anyCAP Low Dropout Regulator Features:High Accuracy over line and load: 0.8% @ 25C, 1.8% over temperatureUltralow dropout voltage: 230 mV (Max) @ 300 mARequires only COUT = 1.0 F for stabilityanyCAP is stable with any type of capacitor (including MLCC)Current and thermal limitingLow noiseLow shutdown current: 2.6 V to 12 V supply range40C to +85C ambient temperature rangeUltrasmall 8-Lead MSOP package

High Accuracy Ultralow IQ, 300 mA, anyCAP Low Dropout Regulator Features:High Accuracy over line and load: 0.8% @ 25C, 1.8% over temperatureUltralow dropout voltage: 230 mV (Max) @ 300 mARequires only COUT = 1.0 F for stabilityanyCAP is stable with any type of capacitor (including MLCC)Current and thermal limitingLow noiseLow shutdown current: 2.6 V to 12 V supply range40C to +85C ambient temperature rangeUltrasmall 8-Lead MSOP package

2 A/1.2 A DC-to-DC Switching Regulator with Independent Positive and Negative Outputs Features: Wide input supply voltage range: 2.85 V to 15 V Generates well regulated, independently resistor programmable VPOS and VNEG outputs Boost regulator to generate VPOS output Adjustable positive output to 39 V Integrated 2.0 A main switch Optional single-ended primary-inductor converter (SEPIC) configuration for automatic step-up/step-down Inverting regulator to generate VNEG output Adjustable negative output to VIN − 39 V Integrated 1.2 A main switch True shutdown for both positive and negative outputs 1.2 MHz/2.4 MHz switching frequency with optional external frequency synchronization from 1.0 MHz to 2.6 MHz Resistor programmable soft start timer Slew rate control for lower system noise Individual precision enable and flexible start-up sequence control for symmetric start, VPOS first, or VNEG first Out-of-phase operation UVLO, OCP, OVP, and TSD protection 4 mm × 4 mm, 20-lead LFCSP and 20-lead TSSOP −40°C to +125°C junction temperature range Supported by the ADIsimPower tool set