20 V, 500 mA, Low Noise LDO Regulator with Soft Start Features: Input voltage range: 3.3 V to 20 V Maximum output current: 500 mA Low noise: 15 μV rms for fixed output versions PSRR performance of 60 dB at 10 kHz, VOUT = 3.3 V Reverse current protection Low dropout voltage: 350 mV at 500 mA Initial accuracy: ±0.8% Accuracy over line, load, and temperature −2% to +1%, TJ = −40°C to +125°C −1.25% to +1%, TJ = 0°C to +85°C Low quiescent current: 900 μA at VIN = 10 V, IOUT = 500 mA Low shutdown current: <50 μA at VIN = 12 V, stable with small 1 μF ceramic output capacitor 3 fixed output voltage options: 1.8, 3.3 V and 5 V Adjustable output from 1.22 V to 19 V Programmable soft start for inrush current control Foldback current-limit and thermal overload protection User programmable precision UVLO/enable Power-good indicator 8-lead LFCSP and 8-lead SOIC packages

High Speed, 5 V, 0.1 F CMOS RS-232 Driver/Receiver Features: 120 kB transmission rate Small (0.1 µF) charge pump capacitors Single 5 V power supply Meets TIA/EIA-232-E and V.28 specifications 2 drivers and 2 receivers On-board dc-to-dc converters ±9 V output swing with 5 V supply Low power BiCMOS: 2.5 mA ICC ±30 V receiver input levels

Equalisers Front Panel HDMI Buffer - TMDS Only

Operational Amplifiers - Op Amps VLTG-FDBK, G= 2 CLAMP AMP

Charge Pump, 7-Channel Smart LED Driver with I2C Interface Features: Charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency 7 independent, programmable LED drivers 7 drivers capable of 30 mA (typical) 1 driver also capable of 60 mA (typical) Programmable maximum current limit (128 levels) Standby mode for <1 μA current consumption 16 programmable fade in and fade out time 0.1 sec to 5.5 sec Choose from linear, square, or cubic rates Fading override I2C-compatible interface for all programming Dedicated reset pin and built-in power-on reset (POR) Short-circuit, overvoltage, and overtemperature protection Internal soft start to limit inrush currents Input-to-output isolation during faults or shutdown Operation down to VIN = 2.5 V with undervoltage lockout (UVLO) at VIN = 2.0 V Available in a small 20-ball, 2.15 mm × 2.36 mm × 0.6 mm WLCSP or a 20-lead, 4 mm × 4 mm × 0.75 mm LFCSP

3-V, RS-232 Serial Port Driver-Receiver Features: Green Idle power-saving mode Single 2.7 V to 3.6 V power supply Operates with 3 V logic 0.1 µF to 1 µF charge pump capacitors Low EMI Low power shutdown: 20 nA Full RS-232 compliance 460 kb/s data rate One receiver active in shutdown (ADM3307E/ADM3311E/ADM3312E/ADM3315E) Two receivers active in shutdown (ADM3310E) ESD >15 kV IEC 1000-4-2 on RS-232 I/Os ESD >15 kV IEC 1000-4-2 on CMOS and RS-232 I/Os (ADM3307E) Qualified for automotive applications

12-Bit High Speed Multiplying D/A Converter Features: Differential Nonlinearity: ±1/2 LSB Nonlinearity: 0.05% Fast Settling Time: 250 ns High Compliance: -5 V to +10 V Differential Outputs: 0 to 4 mA Guaranteed Monotonicity: 12 bits Low Full-Scale Tempco: 10 ppm/°C Circuit Interface to TTL, CMOS, ECL, PMOS/NMOS Low Power Consumption: 225 mW Industry Standard AM6012 Pinout Available in Die Form

Quad 8-Bit Multiplying CMOS D/A Converter with Memory Features: Four DACs in a 28 Pin, 0.6 Inch Wide DIP or 28-Pin JEDEC Plastic Chip Carrier ±1/4 LSB Endpoint Linearity Guaranteed Monotonic DACs Matched to Within 1% Microprocessor Compatible Read/Write Capability (with Memory) TTL/CMOS Compatible Four-Quadrant Multiplication Single-Supply Operation (+5 V) Low Power Consumption Latch-Up Resistant Available in Die Form

13 Gbps, Fast Rise Time AND/NAND/OR/NOR Gate, with Programmable Output Voltage Features: Supports High Data Rates: up to 13 Gbps Differential & Single-Ended Ouputs Fast Rise & Fall Times: 19 / 18 ps Low Power Consumption: 230 mW typ. Single Supply: -3.3V Programmable Differential Output Voltage Swing: 600 - 1100 mV Propagation Delay: 95 ps 16 Lead Ceramic 3 × 3mm SMT Package: 9mm2;

Touch Screen Controllers Touch Screen Digitizer with Dac I.C.