40V Low IQ, 3MHz Dual, 2-Phase Synchronous Step-Down Controller with Spread Spectrum Features: Wide Input Voltage Range: 4.5V to 40V Wide Output Voltage Range: 0.8V to 99% • VIN Low Operating IQ: 14μA (14V to 3.3V, Channel 1 On) Spread Spectrum Operation RSENSE or DCR Current Sensing Out-of-Phase Controllers Reduce Required Input Capacitance and Power Supply Induced Noise Programmable Fixed Frequency (100kHz to 3MHz) Phase-Lockable Frequency (100kHz to 3MHz) Selectable Continuous, Pulse-Skipping, or Low Ripple, Burst Mode® Operation at Light Loads Very Low Dropout Operation: 99% Duty Cycle Power Good Output Voltage Monitors Output Overvoltage Protection Internal LDO Powers Gate Drive from VIN or EXTVCC Low Shutdown IQ: 1.5μA Small 28-Lead 4mm × 5mm QFN Package AEC-Q100 Qualified for Automotive Applications

Quad 31.25A or Single 125A Module Regulator with Digital Power System Management Features: Quad Digitally Adjustable Analog Loops with Digital Interface for Control and Monitoring Wide Input Voltage Range: 4.5V to 16V Output Voltage Range: 0.5V to 3.3V ±0.5% Maximum DC Output Error Over Temperature ±4% Current Readback Accuracy: 0°C to 125°C Integrated Input Current Sense Amplifier 400kHz PMBus-Compliant I2C Serial Interface Supports Telemetry Polling Rates Up to 125Hz Integrated 16-Bit ΔΣ ADC Parallel and Current Share Multiple Modules 15mm × 22mm × 8.17mm BGA Package Readable Data: Input and Output Voltages, Currents, and Temperatures Running Peak Values, Uptime, Faults and Warnings Onboard EEPROM Fault Log Record Writable Data and Configurable Parameters: Output Voltage, Voltage Sequencing and Margining Digital Soft-Start/Stop Ramp, Program Analog Loop OV/UV/OT, UVLO, Frequency and Phasing

1.1A, 35MHz Current Feedback Amplifier Features:1.1A Minimum Output Drive Current35MHz Bandwidth, AV = 2, RL = 10Ω900V/μs Slew Rate, AV = 2, RL = 10ΩHigh Input Impedance: 10MΩWide Supply Range: ± 5V to ±15V (TO-220 and DD Packages)Enhanced θJA SO-16 Package for ±5V OperationShutdown Mode: IS < 200μAAdjustable Supply CurrentStable with CL = 10,000pFOperating Temperature Range: –40°C to 85°CAvailable in 7-Lead DD, TO-220 and 16-Lead SO Packages

40V, 7A Ideal Diode Features: Reduces Power Dissipation by Replacing a Power Schottky Diode with No External Components Internal 7A, 21mΩ N-Channel MOSFET 15mV Regulated Forward Voltage 20μA Operating Current, 0.8μA Shutdown Wide 0V to 40V Input Range with VCC > 2.75V Fast Turn-On Minimizes Voltage Droop Fast Reverse Recovery Time Minimizes Reverse Transient Current Smooth Switchover in Diode-OR Applications 16-Lead 2mm × 3mm LQFN Package

Ultrathin Low VIN, 2A Buck-Boost Module Regulator Features: Wide Input Voltage Range: 2.6V to 5.5V Adjustable Output Voltage Range: 1.8V to 5.5V 2A of Continuous Output Current with VIN ≥ VOUT (Buck Mode and Buck-Boost Mode); Minimum 1A Continuous Output Current with VIN < VOUT (Boost Mode). Low Ripple Buck-Boost Architecture Programmable Soft-Start and VIN UVLO Burst Mode IQ 15μA for High Efficiency at Light Loads Ultrathin, Small Surface Mount Footprint 3.5mm × 4mm × 1.25mm LGA Package

42V, 5A/7A Peak Synchronous Step-Down Silent Switcher with 2.5A Quiescent Current Features: Silent Switcher® Architecture Ultralow EMI Emissions Optional Spread Spectrum Modulation High Efficiency at High Frequency Up to 96% Efficiency at 1MHz, 12VIN to 5VOUT Up to 95% Efficiency at 2MHz, 12VIN to 5VOUT Wide Input Voltage Range: 3.4V to 42V 5A Maximum Continuous, 7A Peak Transient Output Ultralow Quiescent Current Burst Mode® Operation 2.5µA IQ Regulating 12VIN to 3.3VOUT Output Ripple < 10mVP-P Fast Minimum Switch On-Time: 30ns Low Dropout Under All Conditions: 100mV at 1A Forced Continuous Mode Adjustable and Synchronizable: 200kHz to 3MHz Output Soft-Start and Power Good Small 20-Lead 4mm × 3mm LQFN Package AEC-Q100 Qualified for Automotive Applications

36V 10W No-Opto Isolated Flyback Converter Features: 4V to 36V Input Voltage Range 3.6A, 65V Internal DMOS Power Switch Low Quiescent Current Quasi-Resonant Boundary Mode Operation at Heavy Load Low Ripple Burst Mode® Operation at Light Load Minimum Load < 0.5% (Typ) of Full Output No Transformer Third Winding or Opto-Isolator Required for Output Voltage Regulation Accurate EN/UVLO Threshold and Hysteresis Temperature Compensation for Output Diode Output Short-Circuit Protection Thermally Enhanced 8-Lead SO Package

Micropower, Regulated Charge Pump DC/DC Converters Features: 5V Output Current: 100mA (VIN ≥ 3V) 3.3V Output Current: 80mA (VIN ≥ 2.5V) Ultralow Power: 20µA Quiescent Current Regulated Output Voltage: 3.3V ±4%, 5V ±4%, ADJ VIN Range: 2V to 5.5V 800kHz Switching Frequency No Inductors Very Low Shutdown Current: <2µA Shutdown Disconnects Load from VIN PowerGood/Undervoltage Output Adjustable Soft-Start Time Short-Circuit/Thermal Protection Available in 8-Pin MSOP

20-Bit Power No Latency ADC in SO-8 Features: 20-Bit ADC in SO-8 Package 8ppm INL, No Missing Codes at 20 Bits 4ppm Full-Scale Error 0.5ppm Offset 1.2ppm Noise Digital Filter Settles in a Single Cycle. Each Conversion Is Accurate, Even After an Input Step Fast Mode: 16-Bit Noise, 12 Bits TUE at 100sps Internal Oscillator—No External Components Required 110dB Min, 50Hz/60Hz Notch Filter Reference Input Voltage: 0.1V to VCC Live Zero—Extended Input Range Accommodates 12.5% Overrange and Underrange Single Supply 2.7V to 5.5V Operation Low Supply Current (200µA) and Auto Shutdown Pin Compatible with 24-Bit LTC2400

30MHz to 1.4GHz IQ Demodulator with IIP2 and DC Offset Control Features: I/Q Bandwidth of 530MHz or Higher High IIP3: 31dBm at 450MHz, 28dBm at 900MHz High IIP2: 70dBm at 450MHz, 65dBm at 900MHz User Adjustable IIP2 to >80dBm User Adjustable DC Offset Null High Input P1dB: 13.1dBm at 900MHz Image Rejection: 45dB at 900MHz Noise Figure: 9.9dB at 450MHz 10dB at 900MHz Conversion Gain: 5.4dB at 450MHz 5.7dB at 900MHz Shutdown Mode Operating Temperature Range (TC): –40°C to 105°C 24-Lead 4mm × 4mm QFN Package