Isolated Module DC DC Converter 2 Output 2.5 ~ 13V 1.2 ~ 12V 440mA, 300mA 3.1V - 32V Input

2.7 V to 5.5 V, Serial-Input, Voltage-Output, 16-Bit nanoDAC in 10-lead LFCSP, 16-lead 3 mm x 3 mm LFCSP, and 16-lead TSSOP Features: 12-/16-bit resolution 1 LSB INL 11.8 nV/√Hz noise spectral density 1 μs settling time 1.1 nV-sec glitch energy 0.05 ppm/°C temperature drift 5 kV HBM ESD classification See data sheet for additional features Also available in16-lead TSSOP

Low Cost 10-Bit Monolithic D/A Converter Features: Complete Current Output Converted High Stability Buried Zener Reference Laser Trimmed to High Accuracy (1/4 LSB Max Error, AD561K, T) Trimmed Output Application Resistors for 0 V to +10 V, ±5 V Ranges Fast Settling - 250 ns to 1/2 LSB Guaranteed Monotonocity Over Full Operating Temperature Range TTL/DTL and CMOS Compatible (Positive True Logic) Single Chip Monolithic Construction Available in Chip Form MIL-STD-883-Compliant Versions Available

1 MSPS, 14-Bit, Simultaneous Sampling SAR ADC with PGA and Four Comparators Features: Dual, simultaneous sampling, 14-bit, 2-channel ADC True differential analog inputs Programmable gain stage: ×1, ×2, ×3, ×4, ×6, ×8, ×12, ×16, ×24, ×32, ×48, ×64, ×96, ×128 Throughput rate per ADC 1 MSPS for AD7264 Analog input impedance: >1 GΩ Wide input bandwidth −3 dB bandwidth: 1.7 MHz at gain = 2 4 on-chip comparators SNR: 78 dB typical at gain = 2, 71 dB typical at gain = 32 Device offset calibration System gain calibration On-chip reference: 2.5 V −40°C to +105°C operation High speed serial interface Compatible with SPI, QSPI™, MICROWIRE™, and DSP 48-lead LFCSP and LQFP packages

+3/+5 Volt Serial-Input Micropower 10-Bit DAC Features: Micropower - 100 µA Single Supply - 2.7 V to 5.5 V Operation Compact 1.75 mm Height SO-8 Package and 1.1 mm Height TSSOP-8 Package AD7390 - 12-Bit Resolution AD7391 - 10-Bit Resolution SPI and QSPI Serial Interface Compatible with Schmitt Trigger Inputs

Dual, 16-Bit nanoDAC with 5 ppm/C On-Chip Reference, I2C Interface Features: Low power, smallest pin-compatible, dual nanoDACs AD5627R/AD5647R/AD5667R 12-/14-/16-bit On-chip 1.25 V/2.5 V, 5 ppm/°C reference AD5627/AD5667 12-/16-bit External reference only 3 mm × 3 mm LFCSP and 10-lead MSOP 2.7 V to 5.5 V power supply Guaranteed monotonic by design Power-on reset to zero scale Per channel power-down Hardware LDAC and CLR functions I2C-compatible serial interface supports standard (100 kHz), fast (400 kHz), and high speed (3.4 MHz) modes

Tiny 16-Bit SPI nanoDAC+, with 2 (16-Bit) LSB INL and 2 ppm/C Reference Features: Ultrasmall package: 2 mm × 2 mm, 8-lead LFCSP High relative accuracy (INL): ±2 LSB maximum at 16 bits AD5683R/AD5682R/AD5681R Low drift, 2.5 V reference: 2 ppm/°C typical Selectable span output: 2.5 V or 5 V Total unadjusted error (TUE): 0.06% of FSR maximum Offset error: ±1.5 mV maximum Gain error: ±0.05% of FSR maximum Low glitch: 0.1 nV-sec High drive capability: 20 mA Low power: 1.2 mW at 3.3 V Independent logic supply: 1.62 V logic compatible Wide operating temperature range: −40°C to +105°C Robust 4 kV HBM ESD protection

2.7 V to 5.5 V, 140 A, Rail-to-Rail Voltage Output 12-Bit DAC in SOT-23 and MicroSOIC Packages Features: Micropower: 140 µA @ 5 V, 115 µA @ 3 V Power-Down to 200 nA @ 5 V, 50 nA @ 3 V Guaranteed Monotonic by design Power-On-Reset to Zero Volts Three Power-Down Functions SYNC (active low) Interrupt Facility Low Power, SPI™, QSPI™, MICROWIRE™ and DSP-Compatible 3-Wire Serial Interface Output Buffer Amplifier with Rail-to-Rail Operation Temperature Range: -40°C to 105°C Three Power-Down Functions

Precision Wide-range (3 nA - 3 mA) High-Side Current Mirror Features: Accurately mirrors input current (1:1 ratio) over 6 decades - enables monitoring at low signal levels  Linearity 1% from 3 nA to 3 mA Stable mirror input voltage Voltage held 1 V below supply using internal reference or may be set externally providing greater flexibility in design Adjustable input current limit provides protection to the connected photodiode 2.7 V to 8 V single-supply operation Miniature 8-lead chip scale package (LFCSP 2 mm × 3 mm) saves valuable board space

10 MHz TO 10 GHz 67 dB TruPwr Detector Features: Accurate rms-to-dc conversion from 10 MHz to 10 GHz Single-ended ±1 dB dynamic range: 67 dB at 2.14 GHz    No balun or external input matching required Response independent of waveform types, such as GSM/CDMA/W-CDMA/TD-SCDMA/WiMAX/LTE Logarithmic slope: 55 mV/dB Temperature stability: <±1 dB from −40°C to +125°C Operating temperature: −55°C to +125°C Supply voltage: 4.75 V to 5.25 V Sleep current: 250 µA Pin-compatible with ADL5902 and AD8363